#9140 closed defect (invalid)
PPPoE plugin not loaded correctly
| Reported by: | cj@… | Owned by: | developers |
|---|---|---|---|
| Priority: | response-needed | Milestone: | Barrier Breaker 14.07 |
| Component: | packages | Version: | Trunk |
| Keywords: | PPPoE | Cc: |
Description
I am currenty running a custom compiled backfire with kirkwood kernel (version 2.6.35.11).
The problem I am encountering is that my PPPoE connection won't work because the ppp interface does not come up. The status of the WAN interface simply says "Interface not present or not connected yet" and there is no ppp0 interface when I run ifconfig.
I suspect the cause might have something to do with my rp-pppoe.so plugin, because according to the log, it is not loaded properly.
Attachments (1)
Change History (9)
Changed 7 years ago by cj@…
comment:1 Changed 7 years ago by jow
- Priority changed from highest to response-needed
Is ppp-mod-pppoe installed?
comment:2 Changed 7 years ago by cj@…
Yes, it is compiled and according to LuCI it is installed.
comment:3 Changed 7 years ago by anonymous
I have recompiled backfire and made sure PPPoE is installed, but still no luck. I am using ppp-mod-pppoe 2.4.4-16.
comment:4 Changed 7 years ago by robbolo
comment:5 Changed 7 years ago by jow
- Resolution set to fixed
- Status changed from new to closed
Already fixed by r26398.
comment:6 Changed 7 years ago by fantomas
- Resolution fixed deleted
- Status changed from closed to reopened
Still the same problem here with r26679 and NETGEAR WNDR3700!!!! "Interface not present or not connected yet" ... I need to try to reconnect more than 10 times in order to get connection...
comment:7 Changed 7 years ago by jow
- Resolution set to invalid
- Status changed from reopened to closed
So you get a connection in which case this ticket does not apply to your case
comment:8 Changed 4 years ago by jow
- Milestone changed from Attitude Adjustment 12.09 to Barrier Breaker 14.07
Milestone Attitude Adjustment 12.09 deleted
error log