Modify

Opened 7 years ago

Closed 7 years ago

Last modified 4 years ago

#9073 closed task (worksforme)

Hyphens in ifnames causes most pre-processing scripts to fail

Reported by: aenertia@… Owned by: developers
Priority: normal Milestone: Barrier Breaker 14.07
Component: base system Version: Trunk
Keywords: Cc:

Description

Attitude adjustment and backfire have major problems when an ifname (such as pptp-XXXXX) is used.

This stops all sorts of things from working:

Here is a typical example (siproxd) which generates a config file such as:

root@patumate:~# cat /var/etc/siproxd.conf
sip_listen_port = 5060
daemonize = 1
silence_log = 0
log_calls = 1
user = nobody
registration_file = /var/lib/siproxd/siproxd_registrations
pid_file = /var/run/siproxd/siproxd.pid
rtp_proxy_enable = 1
rtp_port_low = 7070
rtp_port_high = 7089
rtp_timeout = 300
default_expires = 600
debug_level = 0x00000000
debug_port = 0
if_inbound = br-lan
if_outbound = xnet_ifname:-

from an /etc/config/siproxd of:
root@patumate:~# cat /etc/config/siproxd
config siproxd general

option if_inbound 'lan'
option if_outbound 'pptp-xnet'

where the actual interface is pptp-xnet (which is assigned to the 'wan' firewall zone, but where no wan interface exists on the system). And where it is labeled as interface xnet in the network config (pptp is automatically added)

This breaks lots of things:

wide-dhcp
route configuration from pptp scripts

probably a bunch of other stuff I have not found.

Solutions: fix preprossing scripts to either

a) work with - hyphens in ifnames
b) not create ifnames with hyphens

Attachments (0)

Change History (2)

comment:1 Changed 7 years ago by jow

  • Resolution set to worksforme
  • Status changed from new to closed

You're supposed to use uci network naes here which may not contain hyphens anyway.

comment:2 Changed 4 years ago by jow

  • Milestone changed from Attitude Adjustment 12.09 to Barrier Breaker 14.07

Milestone Attitude Adjustment 12.09 deleted

Add Comment

Modify Ticket

Action
as closed .
The resolution will be deleted. Next status will be 'reopened'.
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.