Opened 7 years ago

Closed 7 years ago

#9059 closed enhancement (fixed)

Add EHCI support for the Pirelli A226G

Reported by: JackTheVendicator Owned by: florian
Priority: high Milestone: Backfire 10.03.1
Component: kernel Version: Backfire 10.03
Keywords: Cc:


Just substitute target/linux/brcm63xx/patches-2.6.32/130-board_DWVS0.patch with the included patch. This works also for the A226M (has the same board id).

Attachments (1)

130-board_DWVS0.patch (703 bytes) - added by JackTheVendicator 7 years ago.
Added EHCI to DWV-S0

Download all attachments as: .zip

Change History (4)

Changed 7 years ago by JackTheVendicator

Added EHCI to DWV-S0

comment:1 Changed 7 years ago by JackTheVendicator

FYI, I've already tested it on a A226M with a usb hard disk

root@OpenWrt:~# opkg install ./kmod-usb2_2.6.32.27-1_brcm63xx.ipk               
Installing kmod-usb2 ( to root...                                   
Multiple packages (kernel and kernel) providing same name marked HOLD or PREFER.
 Using latest.                                                                  
Configuring kmod-usb2.                                                          
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver                      
bcm63xx_ehci bcm63xx_ehci.0: BCM63XX integrated EHCI controller                 
bcm63xx_ehci bcm63xx_ehci.0: new USB bus registered, assigned bus number 1      
bcm63xx_ehci bcm63xx_ehci.0: irq 18, io mem 0xfffe1300                          
bcm63xx_ehci bcm63xx_ehci.0: USB 2.0 started, EHCI 1.00                         
usb usb1: configuration #1 chosen from 1 choice                                 
hub 1-0:1.0: USB hub found                                                      
hub 1-0:1.0: 2 ports detected                                                   
root@OpenWrt:~# usb 1-1: new high speed USB device using bcm63xx_ehci and addres
s 2                                                                             
usb 1-1: configuration #1 chosen from 1 choice                                  
hub 1-0:1.0: over-current change on port 2

comment:2 Changed 7 years ago by jow

  • Owner changed from developers to florian
  • Status changed from new to assigned

comment:3 Changed 7 years ago by florian

  • Resolution set to fixed
  • Status changed from assigned to closed

Fixed with r27622

Add Comment

Modify Ticket

as closed .
The resolution will be deleted. Next status will be 'reopened'.

E-mail address and user name can be saved in the Preferences.

Note: See TracTickets for help on using tickets.