Modify

Opened 7 years ago

Closed 3 years ago

#9058 closed defect (invalid)

roboswitch does not work on ASUS DSL-N13 (96348GW-10)

Reported by: milan.krstic@… Owned by: developers
Priority: normal Milestone: Barrier Breaker 14.07
Component: kernel Version: Backfire 10.03
Keywords: robo switch brcm63xx Cc:

Description

roboswitch: Probing device eth0:
roboswitch: /home/openwrt/backfire/build/brcm63xx/build_dir/linux-brcm63xx/kmod-switch/switch-robo.c:130 SIOCGETCPHYRD failed!
roboswitch: /home/openwrt/backfire/build/brcm63xx/build_dir/linux-brcm63xx/kmod-switch/switch-robo.c:130 SIOCGETCPHYRD failed!
No Robo switch in managed mode found, phy_id = 0xffffffff
roboswitch: Probing device eth1: No such device
roboswitch: Probing device eth2: No such device
roboswitch: Probing device eth3: No such device

If any more info is needed I will be more than happy to provide.

Attachments (0)

Change History (3)

comment:1 Changed 7 years ago by milan.krstic@…

It appears that this issue is cause by the same problem as #8156.

Kernel reports:

board_bcm963xx: not enough mac address
board_bcm963xx: not enough mac address

If the proposed wokraround (disable CONFIG_SSB_PCIHOST) is applied it still reports

board_bcm963xx: not enough mac address

and the switch is not detected.

However, I managed to get it working by increasing number of available MAC addresses via CFE menu.

Now there's only the problem of obtaining the driver for RT2880 wifi...

comment:2 Changed 4 years ago by jow

  • Milestone changed from Attitude Adjustment 12.09 to Barrier Breaker 14.07

Milestone Attitude Adjustment 12.09 deleted

comment:3 Changed 3 years ago by hauke

  • Resolution set to invalid
  • Status changed from new to closed

roboswitch is not supported any more, use swconfig now.

Add Comment

Modify Ticket

Action
as closed .
The resolution will be deleted. Next status will be 'reopened'.
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.