Modify

Opened 7 years ago

Closed 7 years ago

#8896 closed defect (worksforme)

dnsmasq does not run on multiple AP

Reported by: Rolf Leggewie <dev.openwrt.org@…> Owned by: developers
Priority: normal Milestone: Backfire 10.03.1
Component: packages Version: Backfire 10.03.1 RC4
Keywords: Cc:

Description

dnsmasq dishes out IP numbers over DHCP only on the first AP even if more than one AP is configured for a box.

Attachments (0)

Change History (4)

comment:1 Changed 7 years ago by Rolf Leggewie <dev.openwrt.org@…>

I'm still looking into this, whether it's PEBKAC or a real issue. Will post more information as I find out. I'll try to verify against trunk as well.

comment:2 Changed 7 years ago by Rolf Leggewie <dev.openwrt.org@…>

Here is some information about my configuration. The AP "Public Wifi" gets IP adresses served via DHCP without any problem. FreedomBeam on the other hand does not.

# uci export network
package 'network'

config 'switch' 'eth0'
	option 'enable' '1'

config 'switch_vlan' 'eth0_0'
	option 'device' 'eth0'
	option 'vlan' '0'
	option 'ports' '0 1 2 3 5'

config 'switch_vlan' 'eth0_1'
	option 'device' 'eth0'
	option 'vlan' '1'
	option 'ports' '4 5'

config 'interface' 'loopback'
	option 'ifname' 'lo'
	option 'proto' 'static'
	option 'ipaddr' '127.0.0.1'
	option 'netmask' '255.0.0.0'

config 'interface' 'lan'
	option 'type' 'bridge'
	option 'ifname' 'eth0.0'
	option 'proto' 'static'
	option 'ipaddr' '192.168.3.254'
	option 'netmask' '255.255.255.0'

config 'interface' 'wan'
	option 'ifname' 'eth0.1'
	option 'proto' 'dhcp'

# uci export wireless
package 'wireless'

config 'wifi-device' 'wl0'
	option 'type' 'broadcom'
	option 'disabled' '0'
	option 'hwmode' '11bg'
	option 'channel' 'auto'
	option 'txpower' '80'

config 'wifi-iface'
	option 'device' 'wl0'
	option 'network' 'lan'
	option 'mode' 'ap'
	option 'encryption' 'psk2'
	option 'ssid' 'Public Wifi'
	option 'key' '$PASSWORD'

config 'wifi-iface'
	option 'device' 'wl0'
	option 'ssid' 'FreedomBeam'
	option 'network' 'lan'
	option 'mode' 'ap'
	option 'encryption' 'psk2'
	option 'key' '$PASSWORD'

# uci export dhcp
package 'dhcp'

config 'dnsmasq'
	option 'domainneeded' '1'
	option 'boguspriv' '1'
	option 'filterwin2k' '0'
	option 'localise_queries' '1'
	option 'rebind_protection' '1'
	option 'rebind_localhost' '1'
	option 'local' '/lan/'
	option 'domain' 'lan'
	option 'expandhosts' '1'
	option 'nonegcache' '0'
	option 'authoritative' '1'
	option 'readethers' '1'
	option 'leasefile' '/tmp/dhcp.leases'
	option 'resolvfile' '/tmp/resolv.conf.auto'

config 'dhcp' 'lan'
	option 'interface' 'lan'
	option 'start' '100'
	option 'limit' '150'
	option 'leasetime' '12h'

config 'dhcp' 'wan'
	option 'interface' 'wan'
	option 'ignore' '1'

comment:3 Changed 7 years ago by anonymous

What arch? i.e. is multi-SSID even supported on that arch for OpenWRT?

comment:4 Changed 7 years ago by nbd

  • Resolution set to worksforme
  • Status changed from new to closed

old bug, should be fixed in trunk and backfire 10.03.1-rc5

Add Comment

Modify Ticket

Action
as closed .
The resolution will be deleted. Next status will be 'reopened'.
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.