Opened 7 years ago

Closed 6 years ago

#8870 closed enhancement (obsolete)

Change WR741ND to WR74x as it is also used by WR740N

Reported by: luizluca@… Owned by: developers
Priority: low Milestone:
Component: kernel Version: Trunk
Keywords: Cc:



WR740N support was added to trunk (r24811). However, its support is based on WR741ND files. This is visible to user in leds name.

Please, rename WR741ND board to something more general that exposes that it also supports WR740N.

My suggestion is WR74x or WR74xN

Attachments (0)

Change History (2)

comment:1 Changed 7 years ago by Nilfred <nilfred@…>

It's not possible as images are keyed with board name, but you're right about LEDs names. Let's go a bit further:

TL-WR841ND + USB = TL-MR3420

TL-MR3420 - antenna = TL-MR3220

TL-WR741ND + USB = TL-MR3220

TL-WR741ND = TL-WR740N

TL-WR841ND + antenna = TL-WR941ND

TL-WR1043ND = different beast

They all share same LEDs and buttons so it's logic they share the same name. Name them "tl" for short and portability:

xxx:green:3g -> tl:green:usb

xxx:green:system -> tl:green:sys

xxx:green:qss -> tl:green:qss

ath9k-phy0 -> OK

comment:2 Changed 6 years ago by swalker

  • Resolution set to obsolete
  • Status changed from new to closed

Add Comment

Modify Ticket

as closed .
The resolution will be deleted. Next status will be 'reopened'.

E-mail address and user name can be saved in the Preferences.

Note: See TracTickets for help on using tickets.