Opened 7 years ago

Closed 6 years ago

#8426 closed defect (duplicate)

ipsec-tools fails on ipv6

Reported by: David Levitan <david@…> Owned by: developers
Priority: normal Milestone: Backfire 10.03.1
Component: packages Version: Backfire 10.03.1 RC4
Keywords: Cc:


setkey fails to parse ipv6 addresses. The following line:

spdadd 2001:470:xxxx::/48[any] 2001:470:yyyy::/48[any] any -P out ipsec
esp/tunnel/2001:470:xxxx:1::126-2001:470:yyyy::1/require ;

causes an error of parse failed, line 39 (where line 39 is the line # of that rule).

IP addresses have been modified, but are valid in the original file.

My search has pointed to ipsec-tools not having ipv6 enabled, but it's supposed to. Everything else with ipv6 is fine.

Attachments (0)

Change History (2)

comment:1 Changed 7 years ago by freddy.dsx@…

I have same problem but may be found solution: see my ticket #8182

comment:2 Changed 6 years ago by nico

  • Resolution set to duplicate
  • Status changed from new to closed

Fixed with r25249

Add Comment

Modify Ticket

as closed .
The resolution will be deleted. Next status will be 'reopened'.

E-mail address and user name can be saved in the Preferences.

Note: See TracTickets for help on using tickets.