Modify

Opened 7 years ago

Last modified 3 years ago

#8187 reopened defect

ADM6996LC switch not working with trunk (Speedport W701V)

Reported by: loswillios <loswillios@…> Owned by: developers
Priority: normal Milestone: Barrier Breaker 14.07
Component: base system Version: Trunk
Keywords: Cc:

Description

The switch doesn't get an IP-address via DHCP. Setting an address manually works but no ping etc. Ifconfig reports TX going up while pinging:

eth0      Link encap:Ethernet  HWaddr 00:1A:4F:F4:00:00  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1242 errors:0 dropped:0 overruns:0 frame:0
          TX packets:735 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:522767 (510.5 KiB)  TX bytes:294038 (287.1 KiB)
          Interrupt:27 

bootlog

Linux version 2.6.32.25 (swjawill@faui0sr0) (gcc version 4.3.3 (GCC) ) #2 Sun Nov 7 09:40:17 CET 2010
bootconsole [early0] enabled
CPU revision is: 00018448 (MIPS 4KEc)
TI AR7 (TNETD7200), ID: 0x002b, Revision: 0x11
Determined physical RAM map:
 memory: 02000000 @ 14000000 (usable)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
  Normal   0x00014000 -> 0x00016000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00014000 -> 0x00016000
On node 0 totalpages: 8192
free_area_init_node: node 0, pgdat 9437d3b0, node_mem_map 95000000
  Normal zone: 64 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 8128 pages, LIFO batch:0
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
Kernel command line: rootfstype=squashfs,jffs2 console=ttyS0,38400n8
PID hash table entries: 128 (order: -3, 512 bytes)
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Primary instruction cache 16kB, VIPT, 4-way, linesize 16 bytes.
Primary data cache 8kB, 4-way, VIPT, no aliases, linesize 16 bytes
Memory: 28660k/32768k available (2202k kernel code, 4108k reserved, 347k data, 136k init, 0k highmem)
Hierarchical RCU implementation.
NR_IRQS:256
Clocks: Async mode
Clocks: Setting DSP clock
Clocks: prediv: 1, postdiv: 1, mul: 5
Clocks: base = 25000000, frequency = 125000000, prediv = 1, postdiv = 2, postdiv2 = 1, mul = 10
Clocks: Setting CPU clock
Adjusted requested frequency 211000000 to 211968000
Clocks: prediv: 1, postdiv: 1, mul: 6
Clocks: base = 35328000, frequency = 211968000, prediv = 1, postdiv = 1, postdiv2 = -1, mul = 6
Clocks: Setting USB clock
Adjusted requested frequency 48000000 to 48076920
Clocks: prediv: 13, postdiv: 1, mul: 5
Clocks: base = 125000000, frequency = 48000000, prediv = 13, postdiv = 1, postdiv2 = -1, mul = 5
Calibrating delay loop... 211.35 BogoMIPS (lpj=1056768)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
Switching to clocksource MIPS
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
NET: Registered protocol family 1
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
msgmni has been set to 55
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x8610e00 (irq = 15) is a TI-AR7
console [ttyS0] enabled, bootconsole disabled
physmap platform flash device: 00800000 at 10000000
physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
 CFI mfr 0x000000c2
 CFI id  0x0000227e
 Amd/Fujitsu Extended Query Table at 0x0040
  Amd/Fujitsu Extended Query version 1.3.
physmap-flash.0: Swapping erase regions for broken CFI table.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
cmdlinepart partition parsing not available
RedBoot partition parsing not available
4 ar7part partitions found on MTD device physmap-flash.0
Creating 4 MTD partitions on "physmap-flash.0":
0x000000000000-0x000000010000 : "loader"
0x0000007f0000-0x000000800000 : "config"
0x000000010000-0x0000007f0000 : "linux"
0x0000000e0000-0x0000007f0000 : "rootfs"
mtd: partition "rootfs" set to be root filesystem
mtd: partition "rootfs_data" created automatically, ofs=400000, len=3F0000 
0x000000400000-0x0000007f0000 : "rootfs_data"
Fixed MDIO Bus: probed
cpmac-mii: probed
eth%d: ADM6996 PHY driver attached.
cpmac: device eth0 (regs: 08610000, irq: 27, phy: 1:00, mac: 00:1a:4f:f4:00:00)
ar7_wdt: disabling watchdog timer
ar7_wdt: timer margin 59 seconds (prescale 65535, change 57180, freq 62500000)
Registered led device: 1
Registered led device: 2
Registered led device: 3
Registered led device: 4
Registered led device: 5
vlynq0: regs 0x08611800, irq 29, mem 0x04000000
vlynq0: using remote clock divisor 8
Found a VLYNQ device: 00000029
TCP westwood registered
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
Freeing unused kernel memory: 136k freed
Please be patient, while OpenWrt loads ...
mini_fo: using base directory: /
mini_fo: using storage directory: /tmp/root
device eth0 entered promiscuous mode
br-lan: port 1(eth0) entering forwarding state
PHY: 1:00 - Link is Up - 100/Full
Compat-wireless backport release: compat-wireless-2010-10-14-7-gab01eca
Backport based on wireless-testing.git master-2010-10-19
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
NET: Registered protocol family 8
NET: Registered protocol family 20
PPP generic driver version 2.4.2
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 24
nf_conntrack version 0.5.0 (449 buckets, 1796 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
acx: acx-mac80211, version: v0.6.0 (git: unknown)
acx: this driver is still EXPERIMENTAL
acx: please read the README file and/or go to http://acx100.sourceforge.net/wiki for further information
acx: compiled to use 32bit I/O access. I/O timing issues might occur, such as non-working firmware upload. Report them
acx: running on a little-endian CPU
 PCI/VLYNQ module initialized, waiting for cards to probe...
Not using the 00000009 VLYNQ device's driver for VLYNQ device: 00000029
registered device TI Avalanche SAR
Ohio250(7200/7100A2) detected
requesting firmware image "ar0700xx.bin"
 avsar: firmware: requesting ar0700xx.bin
avsar firmware released
Creating new root folder avalanche in the proc for the driver stats 
Texas Instruments ATM driver: version:[7.05.01.00]
jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
jffs2_build_filesystem(): unlocking the mtd device... done.
jffs2_build_filesystem(): erasing all blocks after the end marker... done.
mini_fo: using base directory: /
mini_fo: using storage directory: /overlay
ar7_wdt: enabling watchdog timer
ar7_wdt: timer margin 59 seconds (prescale 65535, change 57180, freq 62500000)

Attachments (0)

Change History (5)

comment:1 Changed 7 years ago by loswillios <loswillios@…>

captured tcpdump from the router while pinging another device:

root@OpenWrt:/# tcpdump -vvv -i eth0
device eth0 entered promiscuous mode
tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes
00:14:58.680302 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.33 tell 192.168.1.2, length 28
00:14:58.764766 ARP, Ethernet (len 6), IPv4 (len 4), Reply 192.168.1.33 is-at 00:1f:3b:82:71:a5 (oui Unknown), length 46
00:14:59.680309 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.33 tell 192.168.1.2, length 28
00:14:59.682499 ARP, Ethernet (len 6), IPv4 (len 4), Reply 192.168.1.33 is-at 00:1f:3b:82:71:a5 (oui Unknown), length 46
00:15:00.680301 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.33 tell 192.168.1.2, length 28
00:15:00.709858 ARP, Ethernet (len 6), IPv4 (len 4), Reply 192.168.1.33 is-at 00:1f:3b:82:71:a5 (oui Unknown), length 46
00:15:02.336613 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto UDP (17), length 153)
    192.168.1.33.17500 > 255.255.255.255.17500: UDP, length 125
00:15:02.337248 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto UDP (17), length 153)
    192.168.1.33.17500 > 192.168.1.255.17500: UDP, length 125
00:15:02.680303 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.33 tell 192.168.1.2, length 28
00:15:02.682457 ARP, Ethernet (len 6), IPv4 (len 4), Reply 192.168.1.33 is-at 00:1f:3b:82:71:a5 (oui Unknown), length 46
00:15:03.680318 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.33 tell 192.168.1.2, length 28
00:15:03.682545 ARP, Ethernet (len 6), IPv4 (len 4), Reply 192.168.1.33 is-at 00:1f:3b:82:71:a5 (oui Unknown), length 46
00:15:04.680215 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.33 tell 192.168.1.2, length 28
00:15:04.682407 ARP, Ethernet (len 6), IPv4 (len 4), Reply 192.168.1.33 is-at 00:1f:3b:82:71:a5 (oui Unknown), length 46
00:15:05.690299 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.33 tell 192.168.1.2, length 28
00:15:05.692673 ARP, Ethernet (len 6), IPv4 (len 4), Reply 192.168.1.33 is-at 00:1f:3b:82:71:a5 (oui Unknown), length 46
00:15:06.690308 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.33 tell 192.168.1.2, length 28
00:15:06.692589 ARP, Ethernet (len 6), IPv4 (len 4), Reply 192.168.1.33 is-at 00:1f:3b:82:71:a5 (oui Unknown), length 46
00:15:07.690302 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.33 tell 192.168.1.2, length 28
00:15:07.692779 ARP, Ethernet (len 6), IPv4 (len 4), Reply 192.168.1.33 is-at 00:1f:3b:82:71:a5 (oui Unknown), length 46
00:15:08.348138 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto UDP (17), length 212)
    192.168.1.33.631 > 192.168.1.255.631: UDP, length 184
00:15:09.348082 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto UDP (17), length 199)
    192.168.1.33.631 > 192.168.1.255.631: UDP, length 171
00:15:09.690303 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.33 tell 192.168.1.2, length 28
00:15:09.692459 ARP, Ethernet (len 6), IPv4 (len 4), Reply 192.168.1.33 is-at 00:1f:3b:82:71:a5 (oui Unknown), length 46
00:15:10.690308 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.33 tell 192.168.1.2, length 28
00:15:10.692468 ARP, Ethernet (len 6), IPv4 (len 4), Reply 192.168.1.33 is-at 00:1f:3b:82:71:a5 (oui Unknown), length 46
00:15:11.690302 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.33 tell 192.168.1.2, length 28
00:15:11.692384 ARP, Ethernet (len 6), IPv4 (len 4), Reply 192.168.1.33 is-at 00:1f:3b:82:71:a5 (oui Unknown), length 46
00:15:13.690297 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.33 tell 192.168.1.2, length 28
00:15:13.692390 ARP, Ethernet (len 6), IPv4 (len 4), Reply 192.168.1.33 is-at 00:1f:3b:82:71:a5 (oui Unknown), length 46
00:15:14.690307 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.33 tell 192.168.1.2, length 28
00:15:14.692456 ARP, Ethernet (len 6), IPv4 (len 4), Reply 192.168.1.33 is-at 00:1f:3b:82:71:a5 (oui Unknown), length 46
00:15:15.690301 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.33 tell 192.168.1.2, length 28
00:15:15.692469 ARP, Ethernet (len 6), IPv4 (len 4), Reply 192.168.1.33 is-at 00:1f:3b:82:71:a5 (oui Unknown), length 46
00:15:17.690298 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.33 tell 192.168.1.2, length 28
00:15:17.706381 ARP, Ethernet (len 6), IPv4 (len 4), Reply 192.168.1.33 is-at 00:1f:3b:82:71:a5 (oui Unknown), length 46
00:15:18.690315 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.33 tell 192.168.1.2, length 28
00:15:18.730300 ARP, Ethernet (len 6), IPv4 (len 4), Reply 192.168.1.33 is-at 00:1f:3b:82:71:a5 (oui Unknown), length 46
00:15:19.690212 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.33 tell 192.168.1.2, length 28
00:15:19.692353 ARP, Ethernet (len 6), IPv4 (len 4), Reply 192.168.1.33 is-at 00:1f:3b:82:71:a5 (oui Unknown), length 46
00:15:20.700299 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.33 tell 192.168.1.2, length 28
00:15:20.702437 ARP, Ethernet (len 6), IPv4 (len 4), Reply 192.168.1.33 is-at 00:1f:3b:82:71:a5 (oui Unknown), length 46
00:15:21.700302 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.33 tell 192.168.1.2, length 28
00:15:21.702672 ARP, Ethernet (len 6), IPv4 (len 4), Reply 192.168.1.33 is-at 00:1f:3b:82:71:a5 (oui Unknown), length 46
00:15:22.700307 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.33 tell 192.168.1.2, length 28
00:15:22.702463 ARP, Ethernet (len 6), IPv4 (len 4), Reply 192.168.1.33 is-at 00:1f:3b:82:71:a5 (oui Unknown), length 46
00:15:24.353618 IP (tos 0x0, ttl 128, id 8359, offset 0, flags [none], proto UDP (17), length 235)
    
device eth0 left promiscuous mode
19 packets captured
119 packets received by filter
0 packets dropped by kernel

Even the switch LED is blinking while pinging. There is no response however.

comment:2 Changed 7 years ago by loswillios <loswillios@…>

can be closed, works with r24181

comment:3 Changed 7 years ago by loswillios

  • Resolution set to fixed
  • Status changed from new to closed

comment:4 Changed 4 years ago by jow

  • Milestone changed from Attitude Adjustment 12.09 to Barrier Breaker 14.07

Milestone Attitude Adjustment 12.09 deleted

comment:5 Changed 3 years ago by M3m3nt0

  • Resolution fixed deleted
  • Status changed from closed to reopened

The switch is not working with Barrier Breaker 14.07 nor with trunk r43874.

The LED on the router is blinking when pinging from the PC but does not respond.

Add Comment

Modify Ticket

Action
as reopened .
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.