Modify

Opened 7 years ago

Last modified 4 years ago

#7966 new enhancement

add new addresses for traffic redirection

Reported by: anonymous Owned by:
Priority: normal Milestone: Barrier Breaker 14.07
Component: luci Version: Trunk
Keywords: Cc:

Description

In Luci, Network/Firewall/Traffic Redirection, you can pull down the Internal Address menu and add custom addresses, the one default address seems to be x.x.x.10 of whatever the LAN IP is. I've added several custom addresses (.11, .12, etc), but even after saving, the pull down menu doesn't change. It would be great if any addresses added by the user were automatically added to this menu for selection later.

If there's another way to do this, I haven't found it.

Attachments (0)

Change History (2)

comment:1 Changed 7 years ago by JimWright

I'm not sure how this list of addresses is being built, but for reference I have 4 addresses I'm forwarding ports to on my current 10.03.1-rc3 setup, x.x.1.2, x.x.1.10, x.x.1.11, and x.x.1.99. In my pulldown menu, I have .10 and .11, but not .2 or .99. I also have two addresses that I have set up as Static DHCP in Luci's Network/DHCP, and I also have one address that was only valid during a VPN connection from a machine I had accessed this page from, and two other DHCP addresses, one definitely accessed this admin page, the other I can't verify.

It would seem that this pull down list should definitely have anything that's listed for redirection automatically added (if you're routing one port, you're likely to be routing multiple), and any static's defined would make sense, though typically (?) I'd assume workstations are set up with static addresses, not DHCP static addresses. Why addresses the web page was accessed from might be added is unclear.

comment:2 Changed 4 years ago by jow

  • Milestone changed from Attitude Adjustment 12.09 to Barrier Breaker 14.07

Milestone Attitude Adjustment 12.09 deleted

Add Comment

Modify Ticket

Action
as new .
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.