Modify

Opened 8 years ago

Last modified 4 years ago

#7683 new defect

dir-615 A1. can be Work! but swith can't Initialization.

Reported by: 373608915@… Owned by: developers
Priority: normal Milestone: Barrier Breaker 14.07
Component: packages Version: Trunk
Keywords: Cc:

Description

i Under the dir-615 gpl sourcecode to determine MPP_GPIO.
Revised wnr854t.c
Now, he can start properly, but the switch can not drive.
The following is
615_setup.c file and start the log file.

I upgraded to 128 MB ram.:)

Thank you.

Attachments (2)

dir615a1-setup.c (5.6 KB) - added by 373608915@… 8 years ago.
615a1-1.txt (8.4 KB) - added by 373608915@… 8 years ago.

Download all attachments as: .zip

Change History (7)

Changed 8 years ago by 373608915@…

Changed 8 years ago by 373608915@…

comment:1 Changed 8 years ago by 猫.

static struct mv643xx_eth_platform_data dir615a1_eth_data = {
.phy_addr = MV643XX_ETH_PHY_NONE,
.speed = SPEED_100,
.duplex = DUPLEX_FULL,
};

I suspect a problem with this place.

comment:2 follow-up: Changed 8 years ago by florian

I think you need to specify a different PHY address, otherwise I do not think the DSA driver can drive the switch.

comment:3 in reply to: ↑ 2 Changed 8 years ago by anonymous

Replying to florian:

I think you need to specify a different PHY address, otherwise I do not think the DSA driver can drive the switch.

static struct mv643xx_eth_platform_data dir615a1_eth_data = {
.phy_addr = MV643XX_ETH_PHY_NONE,
.speed = SPEED_100,
.duplex = DUPLEX_FULL,
};

How to override diff phy of (.phy_addr = MV643XX_ETH_PHY_NONE,)

comment:4 Changed 7 years ago by sniperpr@…

DIR615-A1 firmware.

SWITCH can't work

comment:5 Changed 4 years ago by jow

  • Milestone changed from Attitude Adjustment 12.09 to Barrier Breaker 14.07

Milestone Attitude Adjustment 12.09 deleted

Add Comment

Modify Ticket

Action
as new .
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.