Modify

Opened 8 years ago

Closed 8 years ago

#7512 closed defect (invalid)

arp command does not take parameters

Reported by: anonymous Owned by: developers
Priority: high Milestone: Backfire 10.03.1
Component: packages Version: Trunk
Keywords: Cc:

Description

OpenWRT 10.03

command arp does not take or get the parameters given at the commandline. Therefore no manual entries can be entered.

Attachments (0)

Change History (2)

comment:1 Changed 8 years ago by ru_lids (ru_lids@…

  1. opkg update; opkg install net-tools
  1. Or use iproute2:

opkg update; opkg install ip

# ip neigh add to 192.168.0.99 lladdr 00:19:c6:6b:b6:17 dev eth1

same as:

# arp -s 192.168.0.99 00:19:c6:6b:b6:17 -i eth1

comment:2 Changed 8 years ago by acoul

  • Resolution set to invalid
  • Status changed from new to closed

the arp that comes with openwrt is a basic command emulated by busybox. As posted above net-tools provide the full arp package. As of r21888 you may choose individual net-tools utilities to install such as arp in this case.

Add Comment

Modify Ticket

Action
as closed .
The resolution will be deleted. Next status will be 'reopened'.
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.