Modify

Opened 8 years ago

Closed 8 years ago

#7241 closed defect (wontfix)

[FONERA 2.0g] Nec usb crontroller crash with gspca-stv06xx driver

Reported by: dk_giuse89@… Owned by: developers
Priority: normal Milestone: Backfire 10.03.1
Component: kernel Version: Trunk
Keywords: Cc:

Description

ohci_hcd 0000:00:00.0: OHCI Unrecoverable Error, scheduling NEC chip restart
usb 2-1.3: device descriptor read/all, error -19
hub 2-1:1.0: cannot disable port 3 (err = -19)
hub 2-1:1.0: cannot reset port 3 (err = -19)
hub 2-1:1.0: cannot disable port 3 (err = -19)
hub 2-1:1.0: cannot reset port 3 (err = -19)
hub 2-1:1.0: cannot disable port 3 (err = -19)
hub 2-1:1.0: cannot reset port 3 (err = -19)
hub 2-1:1.0: cannot disable port 3 (err = -19)
hub 2-1:1.0: unable to enumerate USB device on port 3
hub 2-1:1.0: cannot disable port 3 (err = -19)
hub 2-1:1.0: hub_port_status failed (err = -19)
hub 2-1:1.0: cannot reset port 1 (err = -62)
hub 2-1:1.0: cannot reset port 1 (err = -62)
hub 2-1:1.0: cannot reset port 1 (err = -62)
hub 2-1:1.0: cannot reset port 1 (err = -62)
hub 2-1:1.0: cannot reset port 1 (err = -62)
hub 2-1:1.0: Cannot enable port 1. Maybe the USB cable is bad?
hub 2-1:1.0: cannot disable port 1 (err = -62)
hub 2-1:1.0: cannot reset port 1 (err = -62)
hub 2-1:1.0: cannot reset port 1 (err = -62)
hub 2-1:1.0: cannot reset port 1 (err = -62)
hub 2-1:1.0: cannot reset port 1 (err = -62)
hub 2-1:1.0: cannot reset port 1 (err = -62)
hub 2-1:1.0: Cannot enable port 1. Maybe the USB cable is bad?
hub 2-1:1.0: cannot disable port 1 (err = -62)
hub 2-1:1.0: cannot reset port 1 (err = -62)
hub 2-1:1.0: cannot reset port 1 (err = -62)
hub 2-1:1.0: cannot reset port 1 (err = -62)
hub 2-1:1.0: cannot reset port 1 (err = -62)
hub 2-1:1.0: cannot reset port 1 (err = -62)
hub 2-1:1.0: Cannot enable port 1. Maybe the USB cable is bad?
hub 2-1:1.0: cannot disable port 1 (err = -62)
hub 2-1:1.0: cannot reset port 1 (err = -62)
hub 2-1:1.0: cannot reset port 1 (err = -62)
hub 2-1:1.0: cannot reset port 1 (err = -62)
hub 2-1:1.0: cannot reset port 1 (err = -62)
hub 2-1:1.0: cannot reset port 1 (err = -62)
hub 2-1:1.0: Cannot enable port 1. Maybe the USB cable is bad?
hub 2-1:1.0: cannot disable port 1 (err = -62)
hub 2-1:1.0: cannot reset port 2 (err = -62)
hub 2-1:1.0: cannot reset port 2 (err = -62)
hub 2-1:1.0: cannot reset port 2 (err = -62)
hub 2-1:1.0: cannot disable port 1 (err = -62)
hub 2-1:1.0: hub_port_status failed (err = -62)
hub 2-1:1.0: cannot reset port 2 (err = -62)
usb-storage: device scan complete
hub 2-1:1.0: cannot reset port 2 (err = -62)
hub 2-1:1.0: Cannot enable port 2. Maybe the USB cable is bad?
hub 2-1:1.0: cannot disable port 2 (err = -62)
hub 2-1:1.0: cannot reset port 2 (err = -62)
hub 2-1:1.0: cannot reset port 2 (err = -62)
hub 2-1:1.0: cannot reset port 2 (err = -62)
hub 2-1:1.0: cannot reset port 2 (err = -62)
hub 2-1:1.0: cannot reset port 2 (err = -62)
hub 2-1:1.0: Cannot enable port 2. Maybe the USB cable is bad?
hub 2-1:1.0: cannot disable port 2 (err = -62)
hub 2-1:1.0: cannot reset port 2 (err = -62)
hub 2-1:1.0: cannot reset port 2 (err = -62)
hub 2-1:1.0: cannot reset port 2 (err = -62)
hub 2-1:1.0: cannot reset port 2 (err = -62)
hub 2-1:1.0: cannot reset port 2 (err = -62)
hub 2-1:1.0: Cannot enable port 2. Maybe the USB cable is bad?
hub 2-1:1.0: cannot disable port 2 (err = -62)
hub 2-1:1.0: cannot reset port 2 (err = -62)
hub 2-1:1.0: cannot reset port 2 (err = -62)
hub 2-1:1.0: cannot reset port 2 (err = -62)
hub 2-1:1.0: cannot reset port 2 (err = -62)
hub 2-1:1.0: cannot reset port 2 (err = -62)
hub 2-1:1.0: Cannot enable port 2. Maybe the USB cable is bad?
hub 2-1:1.0: cannot disable port 2 (err = -62)
hub 2-1:1.0: cannot disable port 2 (err = -62)
hub 2-1:1.0: hub_port_status failed (err = -62)
usb-storage: device scan complete
hub 2-1:1.0: hub_port_status failed (err = -62)
EXT3-fs error (device sda2): ext3_find_entry: reading directory #53457 offset 0
EXT3-fs error (device sda2): ext3_find_entry: reading directory #53457 offset 0


WARNING: at fs/buffer.c:1152 0x800f63ec()
Modules linked in: gspca_stv06xx gspca_main usbvideo videodev v4l1_compat usb_storage uhci_hcd ohci_hcd ath_ahb ath_hal(P) nf_nat_tftp nf_conntrack_tftp nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_conntrack_ftp ipt_MASQUERADE iptable_nat nf_nat xt_NOTRACK iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack ehci_hcd sd_mod pppoe pppox ipt_REJECT xt_TCPMSS ipt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tables ext3 jbd tun ppp_async ppp_generic slhc usbcore scsi_mod mbcache crc_ccitt input_core ipv6
Call Trace:[<80061f5c>] 0x80061f5c
[<800494c0>] 0x800494c0
[<800494c0>] 0x800494c0
[<80060ec0>] 0x80060ec0
[<800f63ec>] 0x800f63ec
[<800f63ec>] 0x800f63ec
[<81f8f88c>] 0x81f8f88c
[<81f9124c>] 0x81f9124c
[<81f91360>] 0x81f91360
[<81f8cd2c>] 0x81f8cd2c
[<800dc648>] 0x800dc648
[<81f8da98>] 0x81f8da98
[<800da274>] 0x800da274
[<800da674>] 0x800da674
[<814a66f0>] 0x814a66f0
[<800dc298>] 0x800dc298
[<800da210>] 0x800da210
[<800dc9c0>] 0x800dc9c0
[<800dc978>] 0x800dc978
[<800daca8>] 0x800daca8
[<800dcb40>] 0x800dcb40
[<800d23a4>] 0x800d23a4
[<800dd94c>] 0x800dd94c
[<800e79cc>] 0x800e79cc
[<800ce7dc>] 0x800ce7dc
[<800ded60>] 0x800ded60
[<800ce6f4>] 0x800ce6f4
[<800431d0>] 0x800431d0

---[ end trace cca2ba6876fb6b3f ]---

THIS IS cat /proc/bus/usb/devices

root@OpenWrt:~# cat /proc/bus/usb/devices

T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0001 Rev= 2.06
S: Manufacturer=Linux 2.6.30.10 ohci_hcd
S: Product=OHCI Host Controller
S: SerialNumber=0000:00:00.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms

T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 3
B: Alloc= 0/800 us ( 0%), #Int= 1, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 2.06
S: Manufacturer=Linux 2.6.30.10 ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:00:00.1
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms

T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 4
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=05e3 ProdID=0608 Rev= 9.01
S: Product=USB2.0 Hub
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms

T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0471 ProdID=082b Rev=30.00
S: Manufacturer=Philips
S: Product=USB Flash Drive
S: SerialNumber=05091201001855
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=31875us

T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 4 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=067b ProdID=2506 Rev= 1.00
S: Manufacturer=Prolific Technology Inc.
S: Product=Mass Storage Device
S: SerialNumber=0
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=03 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=ff(vend.) Sub=ff Prot=ff MxPS= 8 #Cfgs= 1
P: Vendor=046d ProdID=0870 Rev= 1.00
S: Product=Camera
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 90mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=82(I) Atr=03(Int.) MxPS= 1 Ivl=16ms
I: If#= 0 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=01(Isoc) MxPS=1023 Ivl=1ms
E: Ad=82(I) Atr=03(Int.) MxPS= 1 Ivl=16ms

Attachments (0)

Change History (2)

comment:1 Changed 8 years ago by dk_giuse89@…

The ouput reported by dmesg command.

Error is caused when i command perform:
mjpg_streamer -b -i "input_uvc.so -d /dev/video0 -r CIF --fps 10 -q 70" -o "output_http.so -p 1234 -w /home/ROOT/SNPSHOOT"

comment:2 Changed 8 years ago by nbd

  • Resolution set to wontfix
  • Status changed from new to closed

It's a hardware problem. One way to work around this is to put an USB 2.0 hub inbetween...

Add Comment

Modify Ticket

Action
as closed .
The resolution will be deleted. Next status will be 'reopened'.
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.