Modify

Opened 8 years ago

Closed 6 years ago

Last modified 4 years ago

#7183 closed defect (wontfix)

New router Asmax AR 1004g

Reported by: mexit@… Owned by: florian
Priority: highest Milestone: Barrier Breaker 14.07
Component: base system Version: Trunk
Keywords: Cc:

Description

# cat /proc/cpuinfo
system type : 96348GW-10
processor : 0
cpu model : BCM6348 V0.7
BogoMIPS : 255.59
wait instruction : no
microsecond timers : yes
tlb_entries : 32
extra interrupt vector : yes
hardware watchpoint : no
unaligned access : 3719
VCED exceptions : not available
VCEI exceptions : not available

Ram: AOTOM A641604L-6TE AP91S5 (x2 = 16MB)
Flash: SST SST39VF3201 (size 4096KB)

BROADCOM BCM6348SKFBG HS0952 P20 952567 N1
BROADCOM BCM4318KFBG HD0931 P11 931411 B5A
BROADCOM BCM5325EKQMG HG0948 P11 950298 1A

Diodes: WLAN, ENET4, ENET3, ENET2, ENET1, INET, ADSL, POWER (RED/GREEN)

backfire final firmware (flashing via CFE firmware upload page):
openwrt-96348GW-10-*-bc300-cfe.bin - after restart router not work
openwrt-96348GW-10-*-bc310-cfe.bin - failed image
openwrt-96348GW-10-*-bccfe-cfe.bin - after restart I see CFE firmware upload page

Attachments (0)

Change History (13)

comment:1 Changed 8 years ago by mexit@…

comment:2 Changed 8 years ago by thepeople

  • Owner changed from developers to florian
  • Status changed from new to assigned

comment:4 Changed 8 years ago by kmotala@…

I tested more images from openwrt site but i have error. Can anybody create image to this router.

comment:5 Changed 8 years ago by mexit@…

Probably cfe don't write the board name to flash and OpenWRT can't recognize the borad

comment:6 Changed 8 years ago by nico

  • Milestone changed from Backfire 10.03.1 to Kamikaze
  • Version changed from Backfire 10.03 to Trunk

comment:7 Changed 7 years ago by mexit@…

CFE version 1.0.37-10.3 for BCM96348 (32bit,SP,BE)
Build Date: ËÄ 3ÔÂ 26 11:25:24 CST 2009 (root@hpp)
Copyright (C) 2000-2006 Broadcom Corporation.

Boot Address 0xbfc00000

Initializing Arena.
Initializing Devices.
Parallel flash device: name SST39VF3201, id 0x235b, size 4096KB
Flash Layout: Boot[63,0xbfff0000] Kern[1,0xbfc10000]

AuxFS[61,0xbffd0000] Misc[61,0xbffd0000] PSI[63,0xbfff0000]

Flash RootFS Partition Length: 3932160
CPU type 0x29107: 256MHz, Bus: 128MHz, Ref: 32MHz
Total memory: 16777216 bytes (16MB)

Total memory used by CFE: 0x80401000 - 0x80525230 (1196592)
Initialized Data: 0x8041CB00 - 0x8041EA50 (8016)
BSS Area: 0x8041EA50 - 0x80423230 (18400)
Local Heap: 0x80423230 - 0x80523230 (1048576)
Stack Area: 0x80523230 - 0x80525230 (8192)
Text (code) segment: 0x80401000 - 0x8041CAF8 (113400)
Boot area (physical): 0x00526000 - 0x00566000
Relocation Factor: I:00000000 - D:00000000

Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Board Id (0-8) : 96348GW-10
Number of MAC Addresses (1-32) : 11
Base MAC Address : 02:10:18:01:00:01
PSI Size (1-64) KBytes : 0
Flash Block Size (1-128) in KBytes: 0
Auxillary File System Size Percent: 0

udp_send finished
No answer .auto boot ...
* Press any key to stop auto run (1 seconds) *
Auto run second count down: 0
Booting from only image (0xbfc10000) ...
Code Address: 0x80010000, Entry Address: 0x80010000
Decompression OK!
Entry at 0x80010000
Closing network.
Starting program at 0x80010000
Linux version 2.6.35.7 (adrian@ubuntu) (gcc version 4.3.3 (GCC) ) #1 Wed Oct 27 19:49:42 CEST 2010
Detected Broadcom 0x6348 CPU revision b0
CPU frequency is 256 MHz
16MB of RAM installed
registering 37 GPIOs
board_bcm963xx: CFE version: 1.0.37-10.3
bootconsole [early0] enabled
CPU revision is: 00029107 (Broadcom BCM6348)
board_bcm963xx: board name: 96348GW-10
Determined physical RAM map:

memory: 01000000 @ 00000000 (usable)

Initrd not found or empty - disabling initrd
Zone PFN ranges:

Normal 0x00000000 -> 0x00001000

Movable zone start PFN for each node
early_node_map[1] active PFN ranges

0: 0x00000000 -> 0x00001000

Built 1 zonelists in Zone order, mobility grouping off. Total pages: 4064
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
PID hash table entries: 64 (order: -4, 256 bytes)
Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
Primary instruction cache 16kB, VIPT, 2-way, linesize 16 bytes.
Primary data cache 8kB, 2-way, VIPT, no aliases, linesize 16 bytes
Memory: 13324k/16384k available (2146k kernel code, 3060k reserved, 368k data, 156k init, 0k highmem)
Hierarchical RCU implementation.

RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.

NR_IRQS:128
Calibrating delay loop... 254.97 BogoMIPS (lpj=509952)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
NET: Registered protocol family 16
registering PCI controller with io_map_base unset
bio: create slab <bio-0> at 0
pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x30001fff]
pci 0000:00:01.0: BAR 0: set to [mem 0x30000000-0x30001fff] (PCI address [0x30000000-0x30001fff]
Switching to clocksource MIPS
PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
ssb: Sonics Silicon Backplane found on PCI device 0000:00:01.0
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 512 (order: 0, 4096 bytes)
TCP bind hash table entries: 512 (order: -1, 2048 bytes)
TCP: Hash tables configured (established 512 bind 512)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
audit: initializing netlink socket (disabled)
type=2000 audit(0.332:1): initialized
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
msgmni has been set to 26
io scheduler noop registered
io scheduler deadline registered (default)
gpiodev: gpio device registered with major 254
bcm63xx_uart.0: ttyS0 at MMIO 0xfffe0300 (irq = 10) is a bcm63xx_uart
console [ttyS0] enabled, bootconsole disabled
console [ttyS0] enabled, bootconsole disabled
bcm963xx_flash: 0x00400000 at 0x1fc00000
bcm963xx: Found 1 x16 devices at 0x0 in 16-bit bank

CFI mfr 0x000000bf
CFI id 0x0000235b

number of CFI chips: 1
bcm963xx_flash: Read Signature value of CFE1CFE1
bcm963xx_flash: CFE bootloader detected
bcm963xx_flash: CFE boot tag found with version and board type Żł
bcm963xx_flash: Partition 0 is CFE offset 0 and length 1000
bcm963xx_flash: Partition 1 is kernel offset 40400000 and length 808111b4
bcm963xx_flash: Partition 2 is rootfs offset c0c111b4 and length 3f7ede4c
bcm963xx_flash: Partition 3 is nvram offset 3ff000 and length 1000
bcm963xx_flash: Partition 4 is linux offset 1000 and length 3fe000
bcm963xx_flash: Spare partition is 1000 offset and length 3fe000
Creating 5 MTD partitions on "bcm963xx":
0x000000000000-0x000000001000 : "CFE"
0x000040400000-0x0000c0c111b4 : "kernel"
mtd: partition "kernel" is out of reach -- disabled
0x0000c0c111b4-0x0001003ff000 : "rootfs"
mtd: partition "rootfs" is out of reach -- disabled
mtd: partition "rootfs" set to be root filesystem
Unhandled kernel unaligned access#1:
Cpu 0
$ 0 : 00000000 10008400 8081bc18 00000001
$ 4 : 808e4628 00000000 808e4618 ffffff03
$ 8 : 0000000a 802bec81 00000018 6c657379
$12 : 6e202272 00000000 00000000 6f6f7466
$16 : 808e4628 000111b4 808188c8 00000030
$20 : 808e462c 000111b4 ffffff03 808e8d00
$24 : 00000008 00000000
$28 : 8081a000 8081bc08 00000030 80184188
Hi : ffffffff
Lo : ffffb8d8
epc : 8001b7d0 0x8001b7d0

Not tainted

ra : 80184188 0x80184188
Status: 10008403 KERNEL EXL IE
Cause : 00800014
BadVA : 00000001
PrId : 00029107 (Broadcom BCM6348)
Modules linked in:
Process swapper (pid: 1, threadinfo=8081a000, task=808188c8, tls=00000000)
Stack : 00000000 10008400 10008401 00000001 808e462c 0000129a 00000001 0000129a

0000000a c0c00000 000111b4 8027fe4c 00000030 808e8d00 000111b4 80184188
80270000 802bec81 802bec4c 00000000 808e4618 808e4628 808e4610 3b9aca00
00000030 808f7e00 c0c111b4 8081bd18 808f7e00 808f7400 01f00000 80253e7c
80246080 8016f4e4 0000007f 3b9aca00 00808000 80030da8 00000030 8081bcb0
...

Call Trace:[<80184188>] 0x80184188
[<8016f4e4>] 0x8016f4e4
[<80030da8>] 0x80030da8
[<8016de24>] 0x8016de24
[<80030da8>] 0x80030da8
[<80170408>] 0x80170408
[<8001a7fc>] 0x8001a7fc
[<801708b8>] 0x801708b8
[<8018a990>] 0x8018a990
[<8016871c>] 0x8016871c
[<80125d8c>] 0x80125d8c
[<80168868>] 0x80168868
[<80126468>] 0x80126468
[<801687fc>] 0x801687fc
[<80167e40>] 0x80167e40
[<801264f8>] 0x801264f8
[<801675a0>] 0x801675a0
[<8009adc8>] 0x8009adc8
[<8009c3b4>] 0x8009c3b4
[<80295270>] 0x80295270
[<80168c18>] 0x80168c18
[<802951f0>] 0x802951f0
[<80174b30>] 0x80174b30
[<80295270>] 0x80295270
[<8001cbe8>] 0x8001cbe8
[<800686d4>] 0x800686d4
[<80294f54>] 0x80294f54
[<80285348>] 0x80285348
[<8001f578>] 0x8001f578
[<8028526c>] 0x8028526c
[<8001f568>] 0x8001f568

Code: ac820008 afb40010 00808021 <ac620000> afa30014 afb20018 2402ffff c2030000 00402021
Disabling lock debugging due to kernel taint
Kernel panic - not syncing: Attempted to kill init!

comment:8 Changed 7 years ago by mexit@…

After erasing whole flash:

Build Date: ËÄ 3ÔÂ 26 11:25:24 CST 2009 (root@hpp)
Copyright (C) 2000-2006 Broadcom Corporation.

Boot Address 0xbfc00000

Initializing Arena.
Initializing Devices.
Parallel flash device: name SST39VF3201, id 0x235b, size 4096KB
Flash Layout: Boot[63,0xbfff0000] Kern[1,0xbfc10000]

AuxFS[61,0xbffd0000] Misc[61,0xbffd0000] PSI[63,0xbfff0000]

Flash RootFS Partition Length: 3932160
CPU type 0x29107: 256MHz, Bus: 128MHz, Ref: 32MHz
Total memory: 16777216 bytes (16MB)

Total memory used by CFE: 0x80401000 - 0x80525230 (1196592)
Initialized Data: 0x8041CB00 - 0x8041EA50 (8016)
BSS Area: 0x8041EA50 - 0x80423230 (18400)
Local Heap: 0x80423230 - 0x80523230 (1048576)
Stack Area: 0x80523230 - 0x80525230 (8192)
Text (code) segment: 0x80401000 - 0x8041CAF8 (113400)
Boot area (physical): 0x00526000 - 0x00566000
Relocation Factor: I:00000000 - D:00000000

Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Board Id (0-8) : 96348GW-10
Number of MAC Addresses (1-32) : 11
Base MAC Address : 02:10:18:63:38:47
PSI Size (1-64) KBytes : 24
Flash Block Size (1-128) in KBytes: 64
Auxillary File System Size Percent: 0

udp_send finished
No answer .auto boot ...
* Press any key to stop auto run (1 seconds) *
Auto run second count down: 0
Booting from only image (0xbfc10000) ...
Code Address: 0x80010000, Entry Address: 0x80010000
Decompression OK!
Entry at 0x80010000
Closing network.
Starting program at 0x80010000
Linux version 2.6.35.7 (adrian@ubuntu) (gcc version 4.3.3 (GCC) ) #1 Wed Oct 27 19:49:42 CEST 2010
Detected Broadcom 0x6348 CPU revision b0
CPU frequency is 256 MHz
16MB of RAM installed
registering 37 GPIOs
board_bcm963xx: CFE version: 1.0.37-10.3
board_bcm963xx: invalid nvram checksum
bootconsole [early0] enabled
CPU revision is: 00029107 (Broadcom BCM6348)
Kernel panic - not syncing: unable to detect bcm963xx board

comment:9 Changed 7 years ago by florian

Please submit the patch which adds suppot for your device. You need to provide a board definition for this.

comment:10 follow-up: Changed 7 years ago by kmotala@…

How can I unbrick my router ?? And when you made openwrt firmware to this router ??

comment:11 in reply to: ↑ 10 Changed 7 years ago by mexit@…

Replying to kmotala@…:

How can I unbrick my router ?? And when you made openwrt firmware to this router ??

  1. Press and hold RESET button
  2. Turn on router, after 10-15 sec release RESET
  3. WWW -> 192.168.1.1 and upload firmware

comment:12 Changed 6 years ago by florian

  • Resolution set to wontfix
  • Status changed from assigned to closed

Until you submit a patch adding support for this router, nothing will be done.

comment:13 Changed 4 years ago by jow

  • Milestone changed from Attitude Adjustment 12.09 to Barrier Breaker 14.07

Milestone Attitude Adjustment 12.09 deleted

Add Comment

Modify Ticket

Action
as closed .
The resolution will be deleted. Next status will be 'reopened'.
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.