Modify

Opened 8 years ago

Closed 7 years ago

Last modified 4 years ago

#7021 closed defect (wontfix)

atheros wifi crash on bcm47xx

Reported by: phr3ak Owned by: nbd
Priority: high Milestone: Barrier Breaker 14.07
Component: packages Version: Trunk
Keywords: Cc:

Description (last modified by hauke)

root@OpenWrt:~# lspci -n
00:02.0 0200: 168c:001a (rev 01)

dmesg:

Linux version 2.6.32.9 (nico@desktop-de-nico) (gcc version 4.3.3 (GCC) ) #2 Tue Mar 23 05:07:03 CET 2010
CPU revision is: 00029006 (Broadcom BCM3302)
ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x03, vendor 0x4243)
ssb: Core 1 found: Fast Ethernet (cc 0x806, rev 0x06, vendor 0x4243)
ssb: Core 2 found: Fast Ethernet (cc 0x806, rev 0x06, vendor 0x4243)
ssb: Core 3 found: USB 1.1 Hostdev (cc 0x808, rev 0x03, vendor 0x4243)
ssb: Core 4 found: PCI (cc 0x804, rev 0x08, vendor 0x4243)
ssb: Core 5 found: MIPS 3302 (cc 0x816, rev 0x03, vendor 0x4243)
ssb: Core 6 found: V90 (cc 0x807, rev 0x02, vendor 0x4243)
ssb: Core 7 found: IPSEC (cc 0x80B, rev 0x00, vendor 0x4243)
ssb: Core 8 found: MEMC SDRAM (cc 0x80F, rev 0x02, vendor 0x4243)
ssb: Initializing MIPS core...
ssb: set_irq: core 0x0806, irq 4 => 4
ssb: set_irq: core 0x0806, irq 5 => 5
ssb: after irq reconfiguration
ssb: core 0x0800, irq : 2(S)  3* 4  5  6  D  I 
ssb: core 0x0806, irq : 2(S)  3  4* 5  6  D  I 
ssb: core 0x0806, irq : 2(S)  3  4  5* 6  D  I 
ssb: core 0x0808, irq : 2(S)* 3  4  5  6  D  I 
ssb: core 0x0804, irq : 2(S)  3  4  5  6* D  I 
ssb: core 0x0816, irq : 2(S)* 3  4  5  6  D  I 
ssb: core 0x0807, irq : 2(S)* 3  4  5  6  D  I 
ssb: core 0x080b, irq : 2(S)* 3  4  5  6  D  I 
ssb: core 0x080f, irq : 2(S)  3  4  5  6  D  I*
ssb: Sonics Silicon Backplane found at address 0x18000000
Serial init done.
Determined physical RAM map:
 memory: 02000000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
  Normal   0x00000000 -> 0x00002000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00000000 -> 0x00002000
On node 0 totalpages: 8192
free_area_init_node: node 0, pgdat 8029e7c0, node_mem_map 81000000
  Normal zone: 64 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 8128 pages, LIFO batch:0
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
PID hash table entries: 128 (order: -3, 512 bytes)
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Primary instruction cache 16kB, VIPT, 2-way, linesize 16 bytes.
Primary data cache 16kB, 2-way, VIPT, cache aliases, linesize 16 bytes
Memory: 29524k/32768k available (2321k kernel code, 3244k reserved, 358k data, 136k init, 0k highmem)
Hierarchical RCU implementation.
NR_IRQS:128
console [ttyS0] enabled
Calibrating delay loop... 263.16 BogoMIPS (lpj=526336)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
Switching to clocksource MIPS
ssb: PCIcore in host mode found
PCI: Fixing up bridge 0000:00:00.0
PCI: Setting latency timer of device 0000:00:00.0 to 64
PCI: Fixing up device 0000:00:00.0
PCI: Fixing latency timer of device 0000:00:00.0 to 168
pci 0000:00:00.0: reg 10 32bit mmio: [0x000000-0x001fff]
pci 0000:00:00.0: reg 14 32bit mmio pref: [0x000000-0x7ffffff]
pci 0000:00:02.0: reg 10 32bit mmio: [0x000000-0x00ffff]
pci 0000:00:03.0: reg 20 io port: [0xfce0-0xfcff]
pci 0000:00:03.0: supports D1 D2
pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:03.0: PME# disabled
pci 0000:00:03.1: reg 20 io port: [0xfce0-0xfcff]
pci 0000:00:03.1: supports D1 D2
pci 0000:00:03.1: PME# supported from D0 D1 D2 D3hot
pci 0000:00:03.1: PME# disabled
pci 0000:00:03.2: reg 10 32bit mmio: [0x000000-0x0000ff]
pci 0000:00:03.2: supports D1 D2
pci 0000:00:03.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:03.2: PME# disabled
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
NET: Registered protocol family 1
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2. (NAND) (SUMMARY)  Âc 2001-2006 Red Hat, Inc.
msgmni has been set to 57
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
serial8250: ttyS0 at MMIO 0xb8000300 (irq = 3) is a 16550A
serial8250: ttyS1 at MMIO 0xb8000400 (irq = 3) is a 16550A
serial8250.0: ttyS0 at MMIO 0xb8000300 (irq = 3) is a 16550A
serial8250.0: ttyS1 at MMIO 0xb8000400 (irq = 3) is a 16550A
flash init: 0x1c000000 0x02000000
Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
 Amd/Fujitsu Extended Query Table at 0x0040
Physically mapped flash: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Flash device: 0x800000 at 0x1fc00000
bootloader size: 262144
Creating 4 MTD partitions on "Physically mapped flash":
0x000000000000-0x000000040000 : "cfe"
0x000000040000-0x0000007f0000 : "linux"
0x00000011a000-0x0000007f0000 : "rootfs"
mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
mtd: partition "rootfs" set to be root filesystem
mtd: partition "rootfs_data" created automatically, ofs=300000, len=4F0000 
0x000000300000-0x0000007f0000 : "rootfs_data"
0x0000007f0000-0x000000800000 : "nvram"
b44.c:v2.0
eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:17:31:fb:2b:78
b44: eth1: PHY Reset would not complete.
eth1: Broadcom 44xx/47xx 10/100BaseT Ethernet 40:10:18:00:00:2d
BCM47xx Watchdog Timer enabled (30 seconds, nowayout)
TCP westwood registered
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Freeing unused kernel memory: 136k freed
Please be patient, while OpenWrt loads ...
diag: Detected 'ASUS WL-500g Premium'
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
roboswitch: Probing device eth0: found a 5325! It's a 5350.
b44: eth0: powering down PHY
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
b44: eth0: powering down PHY
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
b44: eth0: powering down PHY
mini_fo: using base directory: /
mini_fo: using storage directory: /jffs
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
b44: eth0: powering down PHY
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
b44: eth0: powering down PHY
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
device eth0.0 entered promiscuous mode
device eth0 entered promiscuous mode
br-lan: port 1(eth0.0) entering forwarding state
Generic kernel compatibility enabled based on linux-next next-20100113
cfg80211: Calling CRDA to update world regulatory domain
PPP generic driver version 2.4.2
NET: Registered protocol family 24
Broadcom 43xx driver loaded [ Features: PNL, Firmware-ID: FW13 ]
Broadcom 43xx-legacy driver loaded [ Features: PLID, Firmware-ID: FW10 ]
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (463 buckets, 1852 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
cfg80211: World regulatory domain updated:
    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
ath_hal: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
ath_hal: 2009-05-08 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133, RF2425, REGOPS_FUNC, XR)
ath_pci: trunk
wlan: trunk
wlan: mac acl policy registered
ath_rate_minstrel: Minstrel automatic rate control algorithm 1.2 (trunk)
ath_rate_minstrel: look around rate set to 10%
ath_rate_minstrel: EWMA rolloff level set to 75%
ath_rate_minstrel: max segment size in the mrr set to 6000 us
PCI: Enabling device 0000:00:02.0 (0000 -> 0002)
PCI: Fixing up device 0000:00:02.0
Atheros HAL provided by OpenWrt, DD-WRT and MakSat Technologies
Data bus error, epc == 80d2fd7c, ra == 80d014c8
Oops[#1]:
Cpu 0
$ 0   : 00000000 1000d800 c0664000 80d30000
$ 4   : 80d44000 00004000 00000003 00000003
$ 8   : 55555555 00009820 99999999 81c03600
$12   : ffffffff 81c03608 81c03610 00000001
$16   : 00000000 000003e8 80d2fea0 80d2fd34
$20   : 00000003 00000003 00004000 80d44000
$24   : 00000010 80d1aee4                  
$28   : 80c50000 80c51ac8 7fa3a518 80d014c8
Hi    : 00000000
Lo    : 000007ad
epc   : 80d2fd7c 0x80d2fd7c
    Tainted: P          
ra    : 80d014c8 0x80d014c8
Status: 1000d803    KERNEL EXL IE 
Cause : 0080001c
PrId  : 00029006 (Broadcom BCM3302)
Modules linked in: ath_pci(+) ath_hal(P) nf_nat_tftp nf_conntrack_tftp nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_conntrack_ftp ipt_MASQUERADE iptable_nat nf_nat xt_NOTRACK iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack ipt_REJECT xt_TCPMSS ipt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tables ppp_async b43legacy b43 mac80211 crc_ccitt pppoe pppox ppp_generic cfg80211 slhc compat_firmware_class compat arc4 aes_generic deflate ecb cbc switch_robo switch_core diag
Process insmod (pid: 647, threadinfo=80c50000, task=81eb2148, tls=00000000)
Stack : 00000000 80d44000 00000001 80d2fd20 00000013 80d44000 00000003 80d2fd20
        80d2fd34 80c51cb4 80290000 80c825b0 80d1af88 80c51cb4 80290000 80c825b0
        7fa3a518 80d1b060 80d44000 80d30000 80d44000 80d30000 80d44000 80d123d8
        80d44000 80d30000 80d44000 80c51cb4 00000013 80d30000 80d12808 80d12784
        802d6c7c 802d0000 802d6cbc 00000000 c0660000 80c51cb4 80c51bb8 0000000e
        ...
Call Trace:[<80d2fd20>] 0x80d2fd20
[<80d2fd20>] 0x80d2fd20
[<80d2fd34>] 0x80d2fd34
[<80d1af88>] 0x80d1af88
[<80d1b060>] 0x80d1b060
[<80d30000>] 0x80d30000
[<80d30000>] 0x80d30000
[<80d123d8>] 0x80d123d8
[<80d30000>] 0x80d30000
[<80d30000>] 0x80d30000
[<80d12808>] 0x80d12808
[<80d12784>] 0x80d12784
[<801646c4>] 0x801646c4
[<8002505c>] 0x8002505c
[<80025014>] 0x80025014
[<800df5c0>] 0x800df5c0
[<800df0d0>] 0x800df0d0
[<80d0167c>] 0x80d0167c
[<80d2ffc0>] 0x80d2ffc0
[<80d91734>] 0x80d91734
[<800570c4>] 0x800570c4
[<801aaeb4>] 0x801aaeb4
[<80018604>] 0x80018604
[<80d8cc0c>] 0x80d8cc0c
[<8005731c>] 0x8005731c
[<80d9b8ec>] 0x80d9b8ec
[<8012f6c8>] 0x8012f6c8
[<8016865c>] 0x8016865c
[<8014a474>] 0x8014a474
[<8016c014>] 0x8016c014
[<8016c208>] 0x8016c208
[<800e7590>] 0x800e7590
[<8012f6c8>] 0x8012f6c8
[<8016c358>] 0x8016c358
[<8016c3c4>] 0x8016c3c4
[<8012fdb8>] 0x8012fdb8
[<8016b8c0>] 0x8016b8c0
[<8012fe48>] 0x8012fe48
[<8016b010>] 0x8016b010
[<80dce000>] 0x80dce000
[<8016c774>] 0x8016c774
[<80dce000>] 0x80dce000
[<80dce000>] 0x80dce000
[<8014a704>] 0x8014a704
[<80d9c918>] 0x80d9c918
[<80dce284>] 0x80dce284
[<80dce058>] 0x80dce058
[<8000d5c8>] 0x8000d5c8
[<80043290>] 0x80043290
[<80055a44>] 0x80055a44
[<80092630>] 0x80092630
[<80003230>] 0x80003230


Code: 00000000  8c820014  00451021 <8c420000> 03e00008  00000000  3c038029  8c642390  3c021062 

Attachments (0)

Change History (6)

comment:2 Changed 8 years ago by hauke

  • Description modified (diff)

Please build an image with kernel symbols enabled and past the output: "Global build settings" -> "Compile the kernel with symbol table information"

comment:3 Changed 8 years ago by phr3ak

Atheros HAL provided by OpenWrt, DD-WRT and MakSat Technologies
Data bus error, epc == 8142fd7c, ra == 814014c8
Oops[#1]:
Cpu 0
$ 0   : 00000000 1000d800 c03e4000 81430000
$ 4   : 81f6c000 00004000 00000003 00000003
$ 8   : 55555555 00009820 99999999 81c03600
$12   : ffffffff 81c03608 81c03610 00000001
$16   : 00000000 000003e8 8142fea0 8142fd34
$20   : 00000003 00000003 00004000 81f6c000
$24   : 00000010 8141aee4
$28   : 81f48000 81f49ac8 7fc82048 814014c8
Hi    : 00000000
Lo    : 000007ad
epc   : 8142fd7c ath_hal_reg_read+0x48/0x54 [ath_hal]
    Tainted: P
ra    : 814014c8 zz00067d32+0x70/0xdc [ath_hal]
Status: 1000d803    KERNEL EXL IE
Cause : 0080001c
PrId  : 00029006 (Broadcom BCM3302)
Modules linked in: ath_pci(+) ath_hal(P) nf_nat_tftp nf_conntrack_tftp nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_conntrack_ft
p ipt_MASQUERADE iptable_nat nf_nat xt_NOTRACK iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack pppoe pppox
 ipt_REJECT xt_TCPMSS ipt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tab
les ppp_async ppp_generic slhc crc_ccitt switch_robo switch_core diag
Process insmod (pid: 619, threadinfo=81f48000, task=81e81a58, tls=00000000)
Stack : 00000000 81f6c000 00000001 8142fd20 00000013 81f6c000 00000003 8142fd20
        8142fd34 81f49cb4 80290000 814525b0 8141af88 81f49cb4 80290000 814525b0
        7fc82048 8141b060 81f6c000 81430000 81f6c000 81430000 81f6c000 814123d8
        81f6c000 81430000 81f6c000 81f49cb4 00000013 81430000 81412808 81412784
        802d5c7c 802d0000 802d5cbc 00000000 c03e0000 81f49cb4 81f49bb8 0000000e
        ...
Call Trace:
[<8142fd7c>] ath_hal_reg_read+0x48/0x54 [ath_hal]
[<814014c8>] zz00067d32+0x70/0xdc [ath_hal]
[<8141af88>] zz05b781e0+0x5fc/0x6b0 [ath_hal]
[<81430000>] _ath_hal_attach+0x5c/0x104 [ath_hal]


Code: 00000000  8c820014  00451021 <8c420000> 03e00008  00000000  3c038029 8c642360  3c021062

comment:4 Changed 8 years ago by thepeople

  • Owner changed from developers to nbd
  • Status changed from new to assigned

comment:5 Changed 7 years ago by nbd

  • Resolution set to wontfix
  • Status changed from assigned to closed

madwifi development has stopped, consider switching to ath5k

comment:6 Changed 4 years ago by jow

  • Milestone changed from Attitude Adjustment 12.09 to Barrier Breaker 14.07

Milestone Attitude Adjustment 12.09 deleted

Add Comment

Modify Ticket

Action
as closed .
The resolution will be deleted. Next status will be 'reopened'.
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.