Modify

Opened 8 years ago

Closed 6 years ago

#7015 closed defect (invalid)

WRT160NL bricked no failsafe mode

Reported by: proyectoincomppa@… Owned by: developers
Priority: highest Milestone: Backfire 10.03-rc2
Component: base system Version: Backfire 10.03 Beta
Keywords: wrt160nl bricked Cc:

Description

After installing beta version of backfire (openwrt-ar71xx-wrt160nl-squashfs.bin) and upload wifi modules (kmod-ath9k) and lucy, router bricked at reboot (power light blinks right at powering on the router).

No failsafe mode, and all ports are filtered.

Tried the following with fixed ip address in my laptop (192.168.1.2):

  • Holding the reset button during boot for 15 seconds.
  • Push the reset button when all lights blink
  • Push the reset after two seconds of the boot.
  • Push the WPS and reset button during boot for 15 seconds.
  • Push the WPS and reset button several times during boot.
  • Listening on UDP port 4919 (nc -l -v -p 4919 -u) did not work.
  • Tried to upload new firmware via SCP (timed out)

For all the cases i can't telnet 192.168.1.1, no IP responding. nmap with -PN and -p switches recognizes the router.

Attachments (0)

Change History (3)

comment:1 Changed 8 years ago by rtz2

  • Component changed from packages to base system
  • Milestone changed from Backfire 10.03.1 to Backfire 10.03-rc2
  • Resolution set to fixed
  • Status changed from new to closed

This problem occours with new versions of the bootloader in the wrt160nl.
It should be fixed with r20522-r20526 which is in rc2 and later.
You have to use tftp to transfere a new image.

comment:2 Changed 6 years ago by anonymous

  • Resolution fixed deleted
  • Status changed from closed to reopened

i have the sam problem and can't sent image via tftp

comment:3 Changed 6 years ago by jow

  • Resolution set to invalid
  • Status changed from reopened to closed

So get a serail cable and fix it.

Add Comment

Modify Ticket

Action
as closed .
The resolution will be deleted. Next status will be 'reopened'.
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.