Opened 8 years ago

Closed 5 years ago

Last modified 4 years ago

#6640 closed defect (worksforme)

pl2303 serial driver is buggy

Reported by: nagydani@… Owned by: developers
Priority: normal Milestone: Barrier Breaker 14.07
Component: kernel Version: Trunk
Keywords: Cc:


If the USB/serial converter is attached through a USB hub (even the built in one on WL-500GPv2), then it acts up like this:
Sending always works, but receiving works only before the first sending after successful receiving. Then receiving will only work after a reboot. In plain Engish, a send', receive, send communication sequence disables reception until the next reboot.

Tested both with Kamikaze 8.09.2 and trunk, on brcm (Asus WL-520GU and Asus WL-500GPv2) and ar7xx (Linksys WRT160NL) platforms.

Attachments (0)

Change History (2)

comment:1 Changed 5 years ago by florian

  • Resolution set to worksforme
  • Status changed from new to closed

comment:2 Changed 4 years ago by jow

  • Milestone changed from Attitude Adjustment 12.09 to Barrier Breaker 14.07

Milestone Attitude Adjustment 12.09 deleted

Add Comment

Modify Ticket

as closed .
The resolution will be deleted. Next status will be 'reopened'.

E-mail address and user name can be saved in the Preferences.

Note: See TracTickets for help on using tickets.