Modify

Opened 8 years ago

Closed 8 years ago

Last modified 4 years ago

#6502 closed defect (fixed)

mesh mode broken?

Reported by: whiskas Owned by: developers
Priority: normal Milestone: Barrier Breaker 14.07
Component: kernel Version: Trunk
Keywords: mesh, open11s Cc:

Description

After creating a mesh interface the only thing working is beaconing.
I can only see beacon frames with wireshark. No other packets are sent out on this interface (ARPs, ping, ...).

interface created with:
iw phy phy0 interface add imesh2g type mp mesh_id mesh2g
iwconfig imesh2g channel 11
ifconfig imesh2g 192.168.2.4 up

routing information seems fine:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface

192.168.5.0 * 255.255.255.0 U 0 0 0 imesh5g

192.168.2.0 * 255.255.255.0 U 0 0 0 imesh2g

192.168.1.0 * 255.255.255.0 U 0 0 0 eth0

So after ping 192.168.2.7 packets should be sent out. Should...

Attachments (0)

Change History (3)

comment:1 Changed 8 years ago by whiskas

I did an update today and hey! it works again.

Whatever you did, you did it great. Problem solved.

comment:2 Changed 8 years ago by florian

  • Resolution set to fixed
  • Status changed from new to closed

comment:3 Changed 4 years ago by jow

  • Milestone changed from Attitude Adjustment 12.09 to Barrier Breaker 14.07

Milestone Attitude Adjustment 12.09 deleted

Add Comment

Modify Ticket

Action
as closed .
The resolution will be deleted. Next status will be 'reopened'.
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.