Opened 8 years ago

Closed 7 years ago

Last modified 4 years ago

#6088 closed defect (no_response)

Separate vlans (DMZ, multi-wan, etc) are temporarily bridged with the LAN during boot.

Reported by: kijiki0@… Owned by: cshore
Priority: response-needed Milestone: Barrier Breaker 14.07
Component: base system Version: Kamikaze 8.09
Keywords: Cc:


This can be pretty bad if you're creating vlans for security reasons.

The problem is that the bootloader reads the vlan config from NVRAM, which is kamikaze does not update for modified vlan configurations.

When kamikaze configures the switch (by poking around in /proc/switch/eth0), it should also mirror the switch configuration into the NVRAM. This still won't get it right for the first reboot after editing /etc/config/networking, but at least works for all subsequent boots.

Attachments (0)

Change History (4)

comment:1 Changed 8 years ago by cshore

  • Owner changed from developers to cshore
  • Status changed from new to accepted

comment:2 Changed 7 years ago by cshore

  • Priority changed from normal to response-needed

Can you a) check if this is still a problem with backfire
and b) tell us what platform (router and CPU/SoC - e.g. what 'arch')

comment:3 Changed 7 years ago by cshore

  • Resolution set to no_response
  • Status changed from accepted to closed

comment:4 Changed 4 years ago by jow

  • Milestone changed from Attitude Adjustment 12.09 to Barrier Breaker 14.07

Milestone Attitude Adjustment 12.09 deleted

Add Comment

Modify Ticket

as closed .
The resolution will be deleted. Next status will be 'reopened'.

E-mail address and user name can be saved in the Preferences.

Note: See TracTickets for help on using tickets.