Modify

Opened 8 years ago

Last modified 5 years ago

#5943 new defect

D-Link DCS-950g fails to load trunk adm5120 ver.

Reported by: fa310580@… Owned by: developers
Priority: normal Milestone:
Component: base system Version: Trunk
Keywords: Cc:

Description (last modified by florian)

D-Link DCS-950g - lan camera with wifi. Analog CAS-630w

I just build OpenWRT like discribed here http://nosredna.net/TikiWiki/tiki-index.php?page=DCS-950

Console port Boot Sequence looks like this:

Cellvision Boot 2 NOR flash(32M)(V1.05):

LZMA loader for CAS-630, Copyright (C) 2007-2008 OpenWrt.org

Looking for TRX header... found at 00040000, kernel:0000001C len:000B97E4
decompressing kernel... done!
launching kernel...

Linux version 2.6.28.10 (user@ubuntu904desktop) (gcc version 4.1.2) #2 Sat Oct 3
 16:10:10 EDT 2009
console [early0] enabled
CPU revision is: 0001800b (MIPS 4Kc)
SoC      : ADM5120 rev 8, running at 175.000 MHz
Bootdev  : NOR flash
Prom     : Generic
Determined physical RAM map:
 memory: 02000000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
  Normal   0x00000000 -> 0x00002000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00000000 -> 0x00002000
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
Kernel command line: console=ttyS0,115200 rootfstype=squashfs,yaffs2,jffs2
Primary instruction cache 8kB, VIPT, 2-way, linesize 16 bytes.
Primary data cache 8kB, 2-way, VIPT, no aliases, linesize 16 bytes
PID hash table entries: 128 (order: 7, 512 bytes)
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 30108k/32768k available (1804k kernel code, 2660k reserved, 322k data, 1
32k init, 0k highmem)
SLUB: Genslabs=6, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop... 173.56 BogoMIPS (lpj=347136)
Mount-cache hash table entries: 512
net_namespace: 480 bytes
NET: Registered protocol family 16
MIPS: machine is Cellvision CAS-630/630W
registering PCI controller with io_map_base unset
PCI: pci_irq_map is not initialized
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
NET: Registered protocol family 1
squashfs: version 3.0 (2006/03/15) Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2. (NAND) (SUMMARY)  В© 2001-2006 Red Hat, Inc.
yaffs Oct  3 2009 15:55:22 Installing.
msgmni has been set to 58
io scheduler noop registered
io scheduler deadline registered (default)
Serial: AMBA driver
APB:UART0: ttyS0 at MMIO 0x12600000 (irq = 9) is a AMBA
console handover: boot [early0] -> real [ttyS0]
APB:UART1: ttyS1 at MMIO 0x12800000 (irq = 10) is a AMBA
ADM5120 built-in ethernet switch driver version 0.1.1
adm5120-flash.0: probing at 0x1FC00000, size:4096KiB, width:16 bits
adm5120-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
 Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
adm5120-flash.0: found at 0x1FC00000, size:4096KiB, width:16 bits
adm5120-flash.0: adding static partitions
Creating 5 MTD partitions on "adm5120-flash.0":
0x00000000-0x00008000 : "admboot"
0x00008000-0x00010000 : "config"
0x00010000-0x00020000 : "nvfs1"
0x00020000-0x00030000 : "nvfs2"
0x00030000-0x00400000 : "firmware"
adm5120_wdt: Watchdog Timer version 0.1
TCP westwood registered
NET: Registered protocol family 17
trxsplit: searching TRX header in 'admboot'
trxsplit: searching TRX header in 'config'
trxsplit: searching TRX header in 'nvfs1'
trxsplit: searching TRX header in 'nvfs2'
trxsplit: searching TRX header in 'firmware'
trxsplit: TRX header found at 0x10000
trxsplit: creating TRX partitions in 'firmware' (31,4)
Creating 2 MTD partitions on "firmware":
0x0001001c-0x000c9800 : "kernel"
mtd: partition "kernel" doesn't start on an erase block boundary -- force read-o
nly
0x000c9800-0x003d0000 : "rootfs"
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-o
nly
nly
mtd: partition "rootfs_data" created automatically, ofs=1F0000, len=1E0000
0x001f0000-0x003d0000 : "rootfs_data"
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 132k freed
Please be patient, while OpenWrt loads ...
- preinit -
Press CTRL-C for failsafe
gpio-buttons driver version 0.1.1
Button Hotplug driver version 0.3.1
switching to jffs2
mini_fo: using base directory: /
mini_fo: using storage directory: /jffs
- init -

Please press Enter to activate this console. device eth0 entered promiscuous mod
e
br-lan: topology change detected, propagating
br-lan: port 1(eth0) entering forwarding state
PPP generic driver version 2.4.2
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 24
nf_conntrack version 0.5.0 (512 buckets, 2048 max)
adm5120_wdt: enabling watchdog timer

after that output stops...

Attachments (3)

console.txt (4.6 KB) - added by fa310580@… 8 years ago.
OpenWrt Boot Sequence
IMG_3571.jpg (267.9 KB) - added by fa310580@… 8 years ago.
CPU side PCB
IMG_3550.JPG (392.9 KB) - added by fa310580@… 8 years ago.
Video-sensor side PCB

Download all attachments as: .zip

Change History (4)

Changed 8 years ago by fa310580@…

OpenWrt Boot Sequence

Changed 8 years ago by fa310580@…

CPU side PCB

Changed 8 years ago by fa310580@…

Video-sensor side PCB

comment:1 Changed 5 years ago by florian

  • Description modified (diff)

Add Comment

Modify Ticket

Action
as new .
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.