Modify

Opened 9 years ago

Closed 7 years ago

Last modified 4 years ago

#4601 closed defect (fixed)

b43 strange led behaviour on wrt54gl

Reported by: mikaelbrostrom Owned by: hauke
Priority: normal Milestone: Barrier Breaker 14.07
Component: packages Version:
Keywords: Cc:

Description (last modified by hauke)

Hi!

i have a wrt54gl with openwrt-(svn 14470) 2.6.25.17 kernel.
i was trying out the b43 driver for wireless.

Seems to work ok! but there is some issues with the leds....

when i do a ifconfig wlan0 up / or start hostapd the ses_o led (orange cisco led) starts insead of the wlan led. and the tx/rx activity does not work. maby no support yet?

b43-phy0: Broadcom 5352 WLAN found
b43-phy0 debug: Found PHY: Analog 2, Type 2, Revision 7
b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2
...
input: b43-phy1 as /devices/virtual/input/input0
b43-phy1: Loading firmware version 410.2160 (2007-05-26 15:32:10)
Registered led device: b43-phy1::radio
...

cheers
Mikael

Attachments (0)

Change History (9)

comment:1 follow-up: Changed 9 years ago by florian

The gpio mapping of the WLAN/SES LED is probably wrong with BCM5352.

comment:2 in reply to: ↑ 1 Changed 9 years ago by mikaelbrostrom

Hi!

yepp, it would be great if they can add a module option to b43, so i can specify the correct gpiomapping when loading the module into the kernel.

cheers
Mikael

Replying to florian:

The gpio mapping of the WLAN/SES LED is probably wrong with BCM5352.

comment:3 Changed 9 years ago by anonymous

Any update on this one?
I'm also using the same version - 2.6.25.17 - and have same behaviour.
It used to work correctly in the 2.4 (broadcom wl.o driver) version.
Has it been fixed in the 8.09.1 release?

Just curious - not that it's causing any disruption of normal use :)

comment:4 Changed 8 years ago by thepeople

  • Owner changed from developers to hauke
  • Status changed from new to assigned

comment:5 Changed 8 years ago by hauke

  • Description modified (diff)

Does this still occur in recent trunk or backfire?

comment:6 follow-up: Changed 8 years ago by anonymous

I have a WRT54GL with Backfire (release, binary default image).
The WAN LED seems to be ok, the WLAN LED blinks with tx/rx but both LEDs, ses_white and ses_orange are enabled if the wlan interface goes up.
and I don't have a script to do that....

comment:7 in reply to: ↑ 6 Changed 8 years ago by tracid

Replying to anonymous:

I have a WRT54GL with Backfire (release, binary default image).
The WAN LED seems to be ok, the WLAN LED blinks with tx/rx but both LEDs, ses_white and ses_orange are enabled if the wlan interface goes up.
and I don't have a script to do that....

Same here.

comment:8 Changed 7 years ago by hauke

  • Resolution set to fixed
  • Status changed from assigned to closed

Seams to be fixed, if it still occur please reopen this ticket.

comment:9 Changed 4 years ago by jow

  • Milestone changed from Attitude Adjustment 12.09 to Barrier Breaker 14.07

Milestone Attitude Adjustment 12.09 deleted

Add Comment

Modify Ticket

Action
as closed .
The resolution will be deleted. Next status will be 'reopened'.
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.