Modify

Opened 10 years ago

Closed 9 years ago

Last modified 4 years ago

#3104 closed defect (fixed)

clients cant associate when using VLAN+PSK on brcm 2.4 trunk

Reported by: netprince (at) vt (dot) edu Owned by: developers
Priority: high Milestone: Barrier Breaker 14.07
Component: base system Version:
Keywords: nas wl vlan psk Cc:

Description

Testing trunk (r10359) with broadcom 2.4. I have two interfaces with PSK encryption. Client can associate normally on the first wireless interface, but client cannot associate with second interface. Using the same configuration works fine with older wifi driver (4.80.53.0).

/etc/config/wireless

config wifi-device  wl0
        option type     broadcom
        option channel  5
        option disabled '0'

        # REMOVE THIS LINE TO ENABLE WIFI:

config wifi-iface wifi
        option device   wl0
        option network  lan
        option mode     ap
        option ssid     'tester'
        option encryption       'psk'
        option key      'ThisIsATest'

config "wifi-iface" "guest"
        option device   'wl0'
        option network  'lan'
        option mode     'ap'
        option ssid     'tester-guest'
        option encryption       'psk'
        option key      'ThisIsAnotherTest'

iwconfig (just wifi ifaces)

wl0       IEEE 802.11-DS  ESSID:"tester"
          Mode:Master  Frequency:2.432 GHz  Access Point: 00:1B:FC:D4:66:2B
          Bit Rate=54 Mb/s   Tx-Power:15 dBm
          Retry min limit:7   RTS thr:off   Fragment thr:off
          Link Quality:5  Signal level:0  Noise level:158
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:4  Invalid misc:0   Missed beacon:0

wl0.1     IEEE 802.11-DS  ESSID:"tester-guest"
          Mode:Master  Channel:5  Access Point: 02:1B:FC:D4:66:2C
          Bit Rate=54 Mb/s
          RTS thr:off   Fragment thr:off

ifconfig (just wifi ifaces)

wl0       Link encap:Ethernet  HWaddr 00:1B:FC:D4:66:2B
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:56 errors:0 dropped:0 overruns:0 frame:131
          TX packets:72 errors:8 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:6460 (6.3 KiB)  TX bytes:10352 (10.1 KiB)
          Interrupt:2 Base address:0x2000

wl0.1     Link encap:Ethernet  HWaddr 00:1B:FC:D4:66:2B
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

I tried setting the wl0.1 mac address to match the 'access point' reported by iwconfig, and the client could associate, but couldn't transfer data...

Attachments (0)

Change History (2)

comment:1 Changed 9 years ago by nbd

  • Resolution set to fixed
  • Status changed from new to closed

tested and working in latest trunk.

comment:2 Changed 4 years ago by jow

  • Milestone changed from Attitude Adjustment 12.09 to Barrier Breaker 14.07

Milestone Attitude Adjustment 12.09 deleted

Add Comment

Modify Ticket

Action
as closed .
The resolution will be deleted. Next status will be 'reopened'.
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.