Opened 10 years ago

Closed 10 years ago

Last modified 6 years ago

#2964 closed defect (fixed)

nas fails with can't resolve symbol bcopy

Reported by: stano@… Owned by: developers
Priority: normal Milestone:
Component: packages Version:
Keywords: Cc:


An attempt to use WPA ends with : /usr/sbin/nas: can't resolve symbol 'bcopy'

I see the wireless network but I am not able to connect. Running nas without arguments does not produce the error, restarting the networking using /etc/init.d/network restart does.

I was not able to hack the broadcom-wl package - I changed all bcopy and bzero there to memset/memcpy, but I still get the dependency somehow (strings nas still show them). I suspect some the uclibc configuration issue, but I was not able to find where one does configure the uclibc used by the package.

This is on Asus WL-500GP with r10090. Downloading the 7.09 package does not work either: /usr/sbin/nas: can't resolve symbol '__uClibc_start_main' right at the start.

Attachments (0)

Change History (2)

comment:1 Changed 10 years ago by wrt@…

I changend toolchain/uClibc/config/mipsel

-# UCLIBC_SUSV3_LEGACY is not set

nas run ok, but wlc segfaults

Command 'set rxant' failed: -1
Segmentation fault

This is on Asus WL-500W with r10135.

comment:2 Changed 10 years ago by nbd

  • Resolution set to fixed
  • Status changed from new to closed

revert your uclibc config change and try r10207. should work

Add Comment

Modify Ticket

as closed .
The resolution will be deleted. Next status will be 'reopened'.

E-mail address and user name can be saved in the Preferences.

Note: See TracTickets for help on using tickets.