Opened 10 years ago

Closed 10 years ago

Last modified 4 years ago

#2864 closed enhancement (fixed)

Updated the older acx drivers to reflect the vlynq-pci removal

Reported by: nabcore Owned by: developers
Priority: normal Milestone: Barrier Breaker 14.07
Component: kernel Version:
Keywords: ar7 acx acx-mac80211 Cc:


When the vlynq-pci support was dropped in r9143, the newer acx-mac80211 driver was updated accordingly to reflect this in r9144. As far as I see, the older acx driver was not updated in the same way. Unfortunately, the newer acx-mac80211 is still very developmental, does not support master mode properly and IMHO not very stable (#2559,#2555,#2547). Hence we are left with one stable driver that does not work at all and a half working driver that does. Granted, the older acx driver only supports WEP as encryption, but at least it is stable in master mode.

Would it be possible to modify the the older acx driver so that it can work with the vlynq-pci changes? The acx driver in trunk (r9762) does not work; the following is seen when when it is insmodded:

root@Bunny:/# insmod acx debug=0xffff
[42949468.300000] acx: this driver is still EXPERIMENTAL
[42949468.300000] acx: reading README file and/or Craig's HOWTO is recommended, visit in case of further questions/discussion
[42949468.310000] 94946831 ==> acxpci_e_init_module
[42949468.310000] acx: compiled to use 32bit I/O access. I/O timing issues might occur, such as non-working firmware upload. Report them
[42949468.320000] acx: running on a little-endian CPU
[42949468.320000] acx: PCI module v0.3.36 initialized, waiting for cards to probe...
[42949468.330000] 94946833 <== acxpci_e_init_module: 00000000

I think it is just a matter of applying what has been done in r9144 to the acx code.

Attachments (0)

Change History (3)

comment:1 Changed 10 years ago by nabcore

Apologies for a typo; the subject of the ticket should read "Update the older acx drivers to reflect the vlynq-pci removal"

comment:2 Changed 10 years ago by florian

  • Resolution set to fixed
  • Status changed from new to closed

Initial support for acx-vlynq added with [10102]

comment:3 Changed 4 years ago by jow

  • Milestone changed from Attitude Adjustment 12.09 to Barrier Breaker 14.07

Milestone Attitude Adjustment 12.09 deleted

Add Comment

Modify Ticket

as closed .
The resolution will be deleted. Next status will be 'reopened'.

E-mail address and user name can be saved in the Preferences.

Note: See TracTickets for help on using tickets.