Modify

Opened 10 years ago

Closed 10 years ago

Last modified 10 years ago

#2631 closed defect (fixed)

Minor problem in build system

Reported by: petr.stetina@… Owned by: florian
Priority: normal Milestone:
Component: other Version:
Keywords: Cc:

Description

Trying build ADM5120 with USB. make hangs on this question:

  ...
  USB KOBIL chipcard reader (USB_SERIAL_KOBIL_SCT) [M/n/?] m
  USB MCT Single Port Serial Driver (USB_SERIAL_MCT_U232) [N/m/?] n
  USB Moschip 7720 Serial Driver (USB_SERIAL_MOS7720) [M/n/?] m
  USB Moschip 7840/7820 USB Serial Driver (USB_SERIAL_MOS7840) [M/n/?] m
  USB Navman GPS device (USB_SERIAL_NAVMAN) [M/n/?] m
  USB Prolific 2303 Single Port Serial Driver (USB_SERIAL_PL2303) [N/m/?] n
  USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller (EXPERIMENTAL
) (USB_SERIAL_OTI6858) [N/m/?] (NEW)

Build continues when I press N or Enter but question is shown with make V=99 only.

Attachments (0)

Change History (5)

comment:1 Changed 10 years ago by florian

  • Owner changed from developers to florian
  • Status changed from new to assigned

Can you specify the ADM5120 subtarget you are building OpenWrt for ?

comment:2 Changed 10 years ago by nlinux

I've also experienced this when building the ide and scsi support for ixp4xx. The build just causes forever when they are selected. V=99 is required to see the y/n prompts.

comment:3 Changed 10 years ago by petr.stetina@…

Subtarget (Little Endian)
Target Profile (Edimax BR-6104KP)

I'm sorry for late response.

comment:4 Changed 10 years ago by florian

  • Resolution set to fixed
  • Status changed from assigned to closed

No problem, seems to have been fixed with [9484]

comment:5 Changed 10 years ago by petr.stetina@…

Confirmed. Thanks.

Add Comment

Modify Ticket

Action
as closed .
The resolution will be deleted. Next status will be 'reopened'.
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.