Opened 10 years ago

Closed 8 years ago

#2610 closed defect (obsolete)

USB key fails to mount with read capacity failed error

Reported by: chris.sorisio@… Owned by: developers
Priority: normal Milestone:
Component: packages Version: Kamikaze trunk
Keywords: Cc:


Using Kamikaze 7.09 on a Linksys wrtsl54gs.

I was able to mount a USB key, format it as an ext3 filesystem, and install packages to it.

Following the next reboot of the router, I am unable to mount the USB key. It mounts properly on my Fedora desktop.

Error message:

scsi0 : SCSI emulation for USB Mass Storage devices
  Vendor: IBM       Model: Memory Key        Rev: 5.02
  Type:   Direct-Access                      ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
sda : READ CAPACITY failed.
sda : status = 1, message = 00, host = 0, driver = 08 
Current sd00:00: sns = 70  6
ASC=3a ASCQ= 0
Raw sense data:0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00 
sda : block size assumed to be 512 bytes, disk size 1GB.  
Partition check:
 /dev/scsi/host0/bus0/target0/lun0: I/O error: dev 08:00, sector 0
 I/O error: dev 08:00, sector 0
 unable to read partition table
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2

Attachments (0)

Change History (1)

comment:1 Changed 8 years ago by spudz76

  • Resolution set to obsolete
  • Status changed from new to closed
  • Version set to Kamikaze trunk

[patchteam] Closing as obsolete as this may work properly in newer revisions. Also seems very dependent on this original combination of devices. If you still have this issue please open a new ticket.

Add Comment

Modify Ticket

as closed .
The resolution will be deleted. Next status will be 'reopened'.

E-mail address and user name can be saved in the Preferences.

Note: See TracTickets for help on using tickets.