Modify

Opened 10 years ago

Closed 8 years ago

#2597 closed defect (fixed)

Linksys NSLU2 does not work with Huawei E220

Reported by: bioffice@… Owned by: kaloz
Priority: normal Milestone:
Component: packages Version: Kamikaze trunk
Keywords: Cc:

Description

I use version 7.09 on a nslu2 having connected Huawei e220 un USB. Usually I get only one device (/dev/ttyUSB0), and pppd is not working. Once rebooting I've got all the 3 (/dev/ttyUSB0, 1, 2) and I could use it with microcom. Since then I couldn't get back all the 3.

The slug and e220 modem work well with debian, so no HW problem. It's true, I use: HuaweiAktBbo.out.

Can anybody advise?

Attachments (1)

e220_OK_log.txt (27.1 KB) - added by anonymous 10 years ago.

Download all attachments as: .zip

Change History (6)

comment:1 Changed 10 years ago by kaloz

If you are using HuaweiAktBbo.out on Debian (I guess x86), you need the same binary to toogle usb device mode for ixp4xx I guess.. Sorry, I don't have such modem.

Changed 10 years ago by anonymous

comment:2 Changed 10 years ago by anonymous

I use it on NSLU2 http://www.nslu2-linux.org/wiki/Debian/HomePage

By the way, today I could get it working.
Rebooting several time, was still OK. Power off, and on, again not working.

I've tried to attach log files, I'm not sure about success.
Anyhow, the log shouws:

Jan 1 00:00:24 OpenWrt user.info kernel: ohci_hcd 0000:00:01.1: OHCI Host Controller

Jan 1 00:00:24 OpenWrt user.info kernel: ohci_hcd 0000:00:01.1: new USB bus registered, assigned bus number 2
Jan 1 00:00:24 OpenWrt user.info kernel: ohci_hcd 0000:00:01.1: irq 27, io mem 0x48001000
Jan 1 00:00:24 OpenWrt user.info kernel: usb usb2: configuration #1 chosen from 1 choice
Jan 1 00:00:24 OpenWrt user.info kernel: hub 2-0:1.0: USB hub found
Jan 1 00:00:24 OpenWrt user.info kernel: hub 2-0:1.0: 2 ports detected
Jan 1 00:00:24 OpenWrt user.info kernel: usb 2-1: new full speed USB device using ohci_hcd and address 2
Jan 1 00:00:24 OpenWrt user.info kernel: usb 2-1: configuration #1 chosen from 1 choice
Jan 1 00:00:24 OpenWrt user.info kernel: usbcore: registered new interface driver usbserial
Jan 1 00:00:24 OpenWrt user.info kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
Jan 1 00:00:24 OpenWrt user.info kernel: usbserial_generic 2-1:1.0: generic converter detected
Jan 1 00:00:24 OpenWrt user.info kernel: usb 2-1: generic converter now attached to ttyUSB0
/* missing when not OK */
Jan 1 00:00:24 OpenWrt user.info kernel: usbserial_generic 2-1:1.1: generic converter detected
Jan 1 00:00:24 OpenWrt user.info kernel: usb 2-1: generic converter now attached to ttyUSB1
Jan 1 00:00:24 OpenWrt user.info kernel: usbserial_generic 2-1:1.2: generic converter detected
Jan 1 00:00:24 OpenWrt user.info kernel: usb 2-1: generic converter now attached to ttyUSB2
/* missing when not OK */
Jan 1 00:00:24 OpenWrt user.info kernel: usbcore: registered new interface driver usbserial_generic
Jan 1 00:00:24 OpenWrt user.info kernel: drivers/usb/serial/usb-serial.c: USB Serial Driver core
Jan 1 00:00:25 OpenWrt user.notice kernel: SCSI subsystem initialized

comment:3 Changed 10 years ago by Taams

It is a conflict between usb-storage and the option module. You should disable the usb-storage for the mode. Google abould the 'option' module, and you will find the answer more in detail.

comment:4 Changed 10 years ago by kaloz

  • Owner changed from developers to kaloz
  • Status changed from new to assigned

comment:5 Changed 8 years ago by kaloz

  • Resolution set to fixed
  • Status changed from accepted to closed
  • Version set to Kamikaze trunk

should be working with 10.3/trunk

Add Comment

Modify Ticket

Action
as closed .
The resolution will be deleted. Next status will be 'reopened'.
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.