Modify

Opened 18 months ago

#22961 new defect

ADAPTER USB IDE(AK99A) is remounting from time to time

Reported by: marcimix Owned by: developers
Priority: normal Milestone:
Component: kernel Version: Chaos Calmer 15.05
Keywords: TL-WR1043ND Cc:

Description

Hello all!
Now I have AK99A that works flawlessly on any PC with windows/linux with it but with any kind of openwrt is remounitng some time to time. First I thought I need have HUB with AC and still nothing so I bought another one that does not working too how I need.
Is doesn't matter what drive I mount. I do dmesg with Gargoyle 1.9.1 and clean overlay.

My router is TP-Link TL-WR1043ND v2.1

Here is my dmesg output:

[    0.000000] Linux version 3.18.29 (eric@Osiris) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r49261) ) #5 Thu Jul 7 18:08:30 EDT 2016
[    0.000000] MyLoader: sysp=ffff2080, boardp=ffff8310, parts=ffff1653
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
[    0.000000] SoC: Qualcomm Atheros QCA9558 ver 1 rev 0
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x03ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x03ffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x03ffffff]
[    0.000000] On node 0 totalpages: 16384
[    0.000000] free_area_init_node: node 0, pgdat 8035ddf0, node_mem_map 81000000
[    0.000000]   Normal zone: 128 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 16384 pages, LIFO batch:3
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line:  board=TL-WR1043ND-v2 console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 60944K/65536K available (2494K kernel code, 128K rwdata, 532K rodata, 228K init, 188K bss, 4592K reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.000000] Clocks: CPU:720.000MHz, DDR:600.000MHz, AHB:200.000MHz, Ref:40.000MHz
[    0.000000] Calibrating delay loop... 358.80 BogoMIPS (lpj=1794048)
[    0.060000] pid_max: default: 32768 minimum: 301
[    0.060000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.070000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.080000] NET: Registered protocol family 16
[    0.080000] MIPS: machine is TP-LINK TL-WR1043ND v2
[    0.530000] Switched to clocksource MIPS
[    0.540000] NET: Registered protocol family 2
[    0.540000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.540000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.550000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.560000] TCP: reno registered
[    0.560000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.570000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.570000] NET: Registered protocol family 1
[    0.580000] PCI: CLS 0 bytes, default 32
[    0.580000] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.590000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.600000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.610000] msgmni has been set to 119
[    0.610000] io scheduler noop registered
[    0.620000] io scheduler deadline registered (default)
[    0.620000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.630000] console [ttyS0] disabled
[    0.650000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 2500000) is a 16550A
[    0.660000] console [ttyS0] enabled
[    0.670000] bootconsole [early0] disabled
[    0.680000] m25p80 spi0.0: found s25fl064k, expected m25p80
[    0.690000] m25p80 spi0.0: s25fl064k (8192 Kbytes)
[    0.690000] 5 tp-link partitions found on MTD device spi0.0
[    0.700000] Creating 5 MTD partitions on "spi0.0":
[    0.700000] 0x000000000000-0x000000020000 : "u-boot"
[    0.710000] 0x000000020000-0x000000136fdc : "kernel"
[    0.710000] 0x000000136fdc-0x0000007f0000 : "rootfs"
[    0.720000] mtd: device 2 (rootfs) set to be root filesystem
[    0.730000] 1 squashfs-split partitions found on MTD device rootfs
[    0.730000] 0x000000730000-0x0000007f0000 : "rootfs_data"
[    0.740000] 0x0000007f0000-0x000000800000 : "art"
[    0.740000] 0x000000020000-0x0000007f0000 : "firmware"
[    0.770000] switch0: Atheros AR8327 rev. 4 switch registered on ag71xx-mdio.0
[    0.860000] libphy: ag71xx_mdio: probed
[    1.460000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd034, driver=Atheros AR8216/AR8236/AR8316]
[    1.470000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
[    2.060000] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:SGMII
[    2.060000] TCP: cubic registered
[    2.070000] NET: Registered protocol family 17
[    2.070000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    2.080000] Bridge firewalling registered
[    2.090000] 8021q: 802.1Q VLAN Support v1.8
[    2.100000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    2.110000] Freeing unused kernel memory: 228K (80377000 - 803b0000)
[    3.360000] init: Console is alive
[    3.360000] init: - watchdog -
[    5.770000] usbcore: registered new interface driver usbfs
[    5.780000] usbcore: registered new interface driver hub
[    5.780000] usbcore: registered new device driver usb
[    5.830000] SCSI subsystem initialized
[    5.830000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.840000] ehci-platform: EHCI generic platform driver
[    5.850000] ehci-platform ehci-platform.0: EHCI Host Controller
[    5.850000] ehci-platform ehci-platform.0: new USB bus registered, assigned bus number 1
[    5.860000] ehci-platform ehci-platform.0: TX-TX IDP fix enabled
[    5.870000] ehci-platform ehci-platform.0: irq 48, io mem 0x1b000000
[    5.900000] ehci-platform ehci-platform.0: USB 2.0 started, EHCI 1.00
[    5.900000] hub 1-0:1.0: USB hub found
[    5.910000] hub 1-0:1.0: 1 port detected
[    5.910000] ehci-platform ehci-platform.1: EHCI Host Controller
[    5.920000] ehci-platform ehci-platform.1: new USB bus registered, assigned bus number 2
[    5.930000] ehci-platform ehci-platform.1: TX-TX IDP fix enabled
[    5.930000] ehci-platform ehci-platform.1: irq 49, io mem 0x1b400000
[    5.960000] ehci-platform ehci-platform.1: USB 2.0 started, EHCI 1.00
[    5.960000] hub 2-0:1.0: USB hub found
[    5.970000] hub 2-0:1.0: 1 port detected
[    5.970000] usbcore: registered new interface driver usb-storage
[    6.230000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    6.380000] hub 1-1:1.0: USB hub found
[    6.380000] hub 1-1:1.0: 4 ports detected
[    6.450000] init: - preinit -
[    6.850000] usb 1-1.1: new high-speed USB device number 3 using ehci-platform
[    6.960000] eth1: link up (1000Mbps/Full duplex)
[    6.980000] random: procd urandom read with 12 bits of entropy available
[    7.060000] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[    7.070000] scsi host0: usb-storage 1-1.1:1.0
[    7.910000] usb 1-1.4: new high-speed USB device number 4 using ehci-platform
[    8.040000] usb-storage 1-1.4:1.0: USB Mass Storage device detected
[    8.040000] scsi host1: usb-storage 1-1.4:1.0
[    8.080000] scsi 0:0:0:0: Direct-Access     Generic  Flash Disk       8.07 PQ: 0 ANSI: 4
[    8.090000] sd 0:0:0:0: [sda] 3891200 512-byte logical blocks: (1.99 GB/1.85 GiB)
[    8.100000] sd 0:0:0:0: [sda] Write Protect is off
[    8.100000] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[    8.100000] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    8.140000]  sda: sda1 sda2
[    8.150000] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    9.050000] scsi 1:0:0:0: Direct-Access     ST350032 0AS                   PQ: 0 ANSI: 5
[    9.060000] sd 1:0:0:0: [sdb] 976771055 512-byte logical blocks: (500 GB/465 GiB)
[    9.070000] sd 1:0:0:0: [sdb] Write Protect is off
[    9.070000] sd 1:0:0:0: [sdb] Mode Sense: 28 00 00 00
[    9.070000] sd 1:0:0:0: [sdb] No Caching mode page found
[    9.080000] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[    9.120000]  sdb: sdb1
[    9.130000] sd 1:0:0:0: [sdb] Attached SCSI disk
[   10.210000] mount_root: loading kmods from internal overlay
[   10.660000] jffs2: notice: (432) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[   10.670000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[   10.740000] EXT4-fs (sda1): recovery complete
[   10.750000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: 
[   10.760000] mount_root: switched to extroot
[   10.790000] eth1: link down
[   10.800000] procd: - early -
[   10.800000] procd: - watchdog -
[   11.540000] procd: - ubus -
[   12.570000] procd: - init -
[   13.940000] RPC: Registered named UNIX socket transport module.
[   13.950000] RPC: Registered udp transport module.
[   13.950000] RPC: Registered tcp transport module.
[   13.960000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   13.980000] tun: Universal TUN/TAP device driver, 1.6
[   13.980000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   13.990000] gre: GRE over IPv4 demultiplexor driver
[   14.000000] ip_gre: GRE over IPv4 tunneling driver
[   14.030000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   14.040000] nf_conntrack version 0.5.0 (955 buckets, 3820 max)
[   14.060000] 	Hooked IMQ after mangle on PREROUTING
[   14.060000] 	Hooked IMQ after nat on POSTROUTING
[   14.070000] IMQ driver loaded successfully. (numdevs = 2, numqueues = 1, imq_dev_accurate_stats = 1)
[   14.080000] 	Hooking IMQ before NAT on PREROUTING.
[   14.080000] 	Hooking IMQ after NAT on POSTROUTING.
[   14.090000] Netfilter messages via NETLINK v0.30.
[   14.100000] ip_set: protocol 6
[   14.140000] u32 classifier
[   14.140000]     input device check on
[   14.140000]     Actions configured
[   14.150000] Mirror/redirect action on
[   14.180000] fuse init (API version 7.23)
[   14.190000] usbcore: registered new interface driver cdc_acm
[   14.200000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   14.210000] usbcore: registered new interface driver cdc_wdm
[   14.220000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68
[   14.230000] Backport generated by backports.git backports-20151218-0-g2f58d9d
[   14.250000] Ebtables v2.0 registered
[   14.260000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   14.320000] usbcore: registered new interface driver ums-alauda
[   14.330000] usbcore: registered new interface driver ums-cypress
[   14.340000] usbcore: registered new interface driver ums-datafab
[   14.350000] usbcore: registered new interface driver ums-freecom
[   14.350000] usbcore: registered new interface driver ums-isd200
[   14.360000] usbcore: registered new interface driver ums-jumpshot
[   14.370000] usbcore: registered new interface driver ums-karma
[   14.380000] usbcore: registered new interface driver ums-sddr09
[   14.390000] usbcore: registered new interface driver ums-sddr55
[   14.400000] usbcore: registered new interface driver ums-usbat
[   14.410000] usbcore: registered new interface driver usblp
[   14.430000] usbcore: registered new interface driver usbserial
[   14.440000] usbcore: registered new interface driver usbserial_generic
[   14.440000] usbserial: USB Serial support registered for generic
[   14.500000] xt_time: kernel timezone is -0000
[   14.510000] usbcore: registered new interface driver cdc_ether
[   14.520000] usbcore: registered new interface driver cdc_ncm
[   14.560000] usbcore: registered new interface driver huawei_cdc_ncm
[   14.630000] PPP generic driver version 2.4.2
[   14.640000] PPP MPPE Compression module registered
[   14.650000] NET: Registered protocol family 24
[   14.650000] PPTP driver version 0.8.5
[   14.660000] usbcore: registered new interface driver qmi_wwan
[   14.670000] usbcore: registered new interface driver rndis_host
[   14.680000] usbcore: registered new interface driver sierra
[   14.690000] usbserial: USB Serial support registered for Sierra USB modem
[   14.700000] usbcore: registered new interface driver sierra_net
[   14.750000] usbcore: registered new interface driver option
[   14.760000] usbserial: USB Serial support registered for GSM modem (1-port)
[   14.780000] usbcore: registered new interface driver qcserial
[   14.780000] usbserial: USB Serial support registered for Qualcomm USB modem
[   14.820000] ath: EEPROM regdomain: 0x0
[   14.820000] ath: EEPROM indicates default country code should be used
[   14.820000] ath: doing EEPROM country->regdmn map search
[   14.820000] ath: country maps to regdmn code: 0x3a
[   14.820000] ath: Country alpha2 being used: US
[   14.820000] ath: Regpair used: 0x3a
[   14.830000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   14.830000] ieee80211 phy0: Atheros AR9550 Rev:0 mem=0xb8100000, irq=47
[   17.380000] random: nonblocking pool is initialized
[   19.800000] Adding 972796k swap on /dev/sda2.  Priority:-1 extents:1 across:972796k 
[   20.370000] EXT4-fs (sdb1): recovery complete
[   20.370000] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[   22.670000] Adding 972796k swap on /dev/sda2.  Priority:-1 extents:1 across:972796k 
[   23.080000] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[   25.400000] Adding 972796k swap on /dev/sda2.  Priority:-1 extents:1 across:972796k 
[   25.730000] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[   27.630000] eth1: link up (1000Mbps/Full duplex)
[   27.630000] device eth1 entered promiscuous mode
[   28.600000] Adding 972796k swap on /dev/sda2.  Priority:-1 extents:1 across:972796k 
[   28.620000] br-lan: port 1(eth1) entered forwarding state
[   28.620000] br-lan: port 1(eth1) entered forwarding state
[   29.120000] eth0: link up (1000Mbps/Full duplex)
[   29.620000] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[   30.620000] br-lan: port 1(eth1) entered forwarding state
[   32.030000] device wlan0 entered promiscuous mode
[   33.000000] Adding 972796k swap on /dev/sda2.  Priority:-1 extents:1 across:972796k 
[   33.260000] br-lan: port 2(wlan0) entered forwarding state
[   33.270000] br-lan: port 2(wlan0) entered forwarding state
[   33.410000] device wlan0-1 entered promiscuous mode
[   33.420000] br-lan: port 3(wlan0-1) entered forwarding state
[   33.420000] br-lan: port 3(wlan0-1) entered forwarding state
[   33.430000] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[   33.670000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 5 is up
[   34.280000] br-lan: port 3(wlan0-1) entered disabled state
[   34.630000] br-lan: port 3(wlan0-1) entered forwarding state
[   34.640000] br-lan: port 3(wlan0-1) entered forwarding state
[   35.270000] br-lan: port 2(wlan0) entered forwarding state
[   36.640000] br-lan: port 3(wlan0-1) entered forwarding state
[   77.480000] ipt_bandwidth: timezone shift of 120 minutes detected, adjusting
[   77.490000]                old minutes west=0, new minutes west=-120
[  866.560000] usb 1-1.4: USB disconnect, device number 4
[  866.820000] usb 1-1.4: new high-speed USB device number 5 using ehci-platform
[  866.970000] usb-storage 1-1.4:1.0: USB Mass Storage device detected
[  867.000000] scsi host2: usb-storage 1-1.4:1.0
[  867.310000] Adding 972796k swap on /dev/sda2.  Priority:-1 extents:1 across:972796k 
[  868.000000] scsi 2:0:0:0: Direct-Access     ST350032 0AS                   PQ: 0 ANSI: 5
[  868.010000] sd 2:0:0:0: [sdb] 976771055 512-byte logical blocks: (500 GB/465 GiB)
[  868.010000] sd 2:0:0:0: [sdb] Write Protect is off
[  868.020000] sd 2:0:0:0: [sdb] Mode Sense: 28 00 00 00
[  868.030000] sd 2:0:0:0: [sdb] No Caching mode page found
[  868.030000] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[  868.050000]  sdb: sdb1
[  868.060000] sd 2:0:0:0: [sdb] Attached SCSI disk
[  868.110000] Adding 972796k swap on /dev/sda2.  Priority:-1 extents:1 across:972796k 
[  870.190000] Adding 972796k swap on /dev/sda2.  Priority:-1 extents:1 across:972796k 
[  870.390000] EXT4-fs (sdb1): recovery complete
[  870.400000] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[  871.320000] Adding 972796k swap on /dev/sda2.  Priority:-1 extents:1 across:972796k 
[  871.530000] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 1251.620000] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[ 2610.440000] usb 1-1.4: USB disconnect, device number 5
[ 2610.700000] usb 1-1.4: new high-speed USB device number 6 using ehci-platform
[ 2610.850000] usb-storage 1-1.4:1.0: USB Mass Storage device detected
[ 2610.890000] scsi host3: usb-storage 1-1.4:1.0
[ 2611.370000] Adding 972796k swap on /dev/sda2.  Priority:-1 extents:1 across:972796k 
[ 2611.950000] scsi 3:0:0:0: Direct-Access     ST350032 0AS                   PQ: 0 ANSI: 5
[ 2611.960000] sd 3:0:0:0: [sdb] 976771055 512-byte logical blocks: (500 GB/465 GiB)
[ 2611.980000] sd 3:0:0:0: [sdb] Write Protect is off
[ 2611.980000] sd 3:0:0:0: [sdb] Mode Sense: 28 00 00 00
[ 2611.990000] sd 3:0:0:0: [sdb] No Caching mode page found
[ 2611.990000] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 2612.060000]  sdb: sdb1
[ 2612.100000] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2612.540000] Adding 972796k swap on /dev/sda2.  Priority:-1 extents:1 across:972796k 
[ 2612.860000] EXT4-fs (sdb1): recovery complete
[ 2612.870000] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 2615.440000] Adding 972796k swap on /dev/sda2.  Priority:-1 extents:1 across:972796k 
[ 2615.680000] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 2616.750000] Adding 972796k swap on /dev/sda2.  Priority:-1 extents:1 across:972796k 
[ 2616.990000] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 2730.770000] usb 1-1.4: USB disconnect, device number 6
[ 2731.020000] usb 1-1.4: new high-speed USB device number 7 using ehci-platform
[ 2731.170000] usb-storage 1-1.4:1.0: USB Mass Storage device detected
[ 2731.210000] scsi host4: usb-storage 1-1.4:1.0
[ 2731.820000] Adding 972796k swap on /dev/sda2.  Priority:-1 extents:1 across:972796k 
[ 2732.260000] scsi 4:0:0:0: Direct-Access     ST350032 0AS                   PQ: 0 ANSI: 5
[ 2732.270000] sd 4:0:0:0: [sdb] 976771055 512-byte logical blocks: (500 GB/465 GiB)
[ 2732.280000] sd 4:0:0:0: [sdb] Write Protect is off
[ 2732.290000] sd 4:0:0:0: [sdb] Mode Sense: 28 00 00 00
[ 2732.310000] sd 4:0:0:0: [sdb] No Caching mode page found
[ 2732.310000] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2732.380000]  sdb: sdb1
[ 2732.430000] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 2732.900000] Adding 972796k swap on /dev/sda2.  Priority:-1 extents:1 across:972796k 
[ 2733.170000] EXT4-fs (sdb1): recovery complete
[ 2733.180000] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 2736.150000] Adding 972796k swap on /dev/sda2.  Priority:-1 extents:1 across:972796k 
[ 2736.450000] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 2737.560000] Adding 972796k swap on /dev/sda2.  Priority:-1 extents:1 across:972796k 
[ 2737.830000] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 3359.760000] usb 1-1.4: USB disconnect, device number 7
[ 3360.010000] usb 1-1.4: new high-speed USB device number 8 using ehci-platform
[ 3360.180000] usb-storage 1-1.4:1.0: USB Mass Storage device detected
[ 3360.220000] scsi host5: usb-storage 1-1.4:1.0
[ 3360.530000] Adding 972796k swap on /dev/sda2.  Priority:-1 extents:1 across:972796k 
[ 3361.220000] scsi 5:0:0:0: Direct-Access     ST350032 0AS                   PQ: 0 ANSI: 5
[ 3361.230000] sd 5:0:0:0: [sdb] 976771055 512-byte logical blocks: (500 GB/465 GiB)
[ 3361.240000] sd 5:0:0:0: [sdb] Write Protect is off
[ 3361.240000] sd 5:0:0:0: [sdb] Mode Sense: 28 00 00 00
[ 3361.240000] sd 5:0:0:0: [sdb] No Caching mode page found
[ 3361.250000] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 3361.270000]  sdb: sdb1
[ 3361.290000] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 3361.320000] Adding 972796k swap on /dev/sda2.  Priority:-1 extents:1 across:972796k 
[ 3363.400000] Adding 972796k swap on /dev/sda2.  Priority:-1 extents:1 across:972796k 
[ 3363.610000] EXT4-fs (sdb1): recovery complete
[ 3363.610000] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 3364.570000] Adding 972796k swap on /dev/sda2.  Priority:-1 extents:1 across:972796k 
[ 3364.780000] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 3468.560000] usb 1-1.4: USB disconnect, device number 8
[ 3468.820000] usb 1-1.4: new high-speed USB device number 9 using ehci-platform
[ 3468.950000] usb-storage 1-1.4:1.0: USB Mass Storage device detected
[ 3469.000000] scsi host6: usb-storage 1-1.4:1.0
[ 3469.340000] Adding 972796k swap on /dev/sda2.  Priority:-1 extents:1 across:972796k 
[ 3470.000000] scsi 6:0:0:0: Direct-Access     ST350032 0AS                   PQ: 0 ANSI: 5
[ 3470.010000] sd 6:0:0:0: [sdb] 976771055 512-byte logical blocks: (500 GB/465 GiB)
[ 3470.020000] sd 6:0:0:0: [sdb] Write Protect is off
[ 3470.020000] sd 6:0:0:0: [sdb] Mode Sense: 28 00 00 00
[ 3470.020000] sd 6:0:0:0: [sdb] No Caching mode page found
[ 3470.030000] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3470.050000]  sdb: sdb1
[ 3470.070000] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 3470.130000] Adding 972796k swap on /dev/sda2.  Priority:-1 extents:1 across:972796k 
[ 3472.220000] Adding 972796k swap on /dev/sda2.  Priority:-1 extents:1 across:972796k 
[ 3472.470000] EXT4-fs (sdb1): recovery complete
[ 3472.470000] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 3473.520000] Adding 972796k swap on /dev/sda2.  Priority:-1 extents:1 across:972796k 
[ 3473.730000] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)

Attachments (0)

Change History (0)

Add Comment

Modify Ticket

Action
as new .
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.