Modify

Opened 20 months ago

Last modified 18 months ago

#22496 new defect

Trendnet TEW-692GR & 15.05.1

Reported by: dbobadilla001@… Owned by: developers
Priority: highest Milestone:
Component: base system Version: Chaos Calmer 15.05
Keywords: Cc:

Description

After flashing the factory image openwrt-15.05.1-ramips-rt3883-tew-692gr-squashfs-factory.bin15.05.1 and it looks like same switching internal switch problem:
It is booting, also failsafe mode is ok but all tries to reach the Router via LAN are failing.

root@OpenWrt:/# dmesg | grep switch
[ 2.340000] switch0: Atheros AR8327 rev. 2 switch registered on mdio-bus
[ 8.100000] mount_root: switching to jffs2 overlay
root@OpenWrt:/#

I've tried to configure default ssid OpenWrt chaging value disbled from '1' to '0' and router brings up the blue LED of WiFi but I can't see any network broadcasting OpenWrt...

swconfig dev switch0 show the following:
Failed to connect to the switch. Use the "list" command to see which switches are available.

but listing is empty:
root@OpenWrt:/#swconfig list
root@OpenWrt:/#

(nothing...)

Starting kernel ...

[ 0.000000] Linux version 3.18.23 (buildbot@builder1) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r47269) ) #1 Sun Jan 31 15:02:30 CET 2016
[ 0.000000] SoC Type: Ralink RT3883 ver:1 eco:5
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 0001974c (MIPS 74Kc)
[ 0.000000] MIPS: machine is TRENDnet TEW-692GR
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 04000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x03ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x03ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x03ffffff]
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
[ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 61236K/65536K available (2632K kernel code, 126K rwdata, 540K rodata, 148K init, 190K bss, 4300K reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:256
[ 0.000000] CPU Clock: 500MHz
[ 0.000000] Calibrating delay loop... 249.44 BogoMIPS (lpj=1247232)
[ 0.070000] pid_max: default: 32768 minimum: 301
[ 0.070000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.080000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.090000] pinctrl core: initialized pinctrl subsystem
[ 0.100000] NET: Registered protocol family 16
[ 0.110000] rt3883-pci 10140000.pci: mode: PCIe
[ 1.710000] PCI host bridge /pci@10140000/host-bridge ranges:
[ 1.720000] MEM 0x0000000020000000..0x000000002fffffff
[ 1.730000] IO 0x0000000010160000..0x000000001016ffff
[ 1.750000] rt2880_gpio 10000600.gpio: registering 24 gpios
[ 1.760000] rt2880_gpio 10000600.gpio: registering 24 irq handlers
[ 1.770000] rt2880_gpio 10000638.gpio: registering 16 gpios
[ 1.780000] PCI host bridge to bus 0000:00
[ 1.780000] pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff]
[ 1.790000] pci_bus 0000:00: root bus resource [io 0xffffffff]
[ 1.800000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 1.810000] pci 0000:00:01.0: BAR 8: assigned [mem 0x20000000-0x200fffff]
[ 1.820000] pci 0000:00:01.0: BAR 1: assigned [mem 0x20100000-0x2010ffff]
[ 1.830000] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x2000ffff]
[ 1.840000] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 1.840000] pci 0000:00:01.0: bridge window [mem 0x20000000-0x200fffff]
[ 1.850000] pci 0000:00:01.0: of_irq_parse_pci() failed with rc=-22
[ 1.860000] Switched to clocksource MIPS
[ 1.870000] NET: Registered protocol family 2
[ 1.870000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 1.890000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 1.900000] TCP: Hash tables configured (established 1024 bind 1024)
[ 1.910000] TCP: reno registered
[ 1.920000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 1.930000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 1.940000] NET: Registered protocol family 1
[ 1.950000] rt-timer 10000100.timer: maximum frequency is 10131Hz
[ 1.970000] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 1.990000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 2.000000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 2.020000] msgmni has been set to 119
[ 2.030000] io scheduler noop registered
[ 2.030000] io scheduler deadline registered (default)
[ 2.050000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 2.060000] console [ttyS0] disabled
[ 2.070000] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a 16550A
[ 2.090000] console [ttyS0] enabled
[ 2.090000] console [ttyS0] enabled
[ 2.100000] bootconsole [early0] disabled
[ 2.100000] bootconsole [early0] disabled
[ 2.120000] 1c000000.nor-flash: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x0022cb
[ 2.140000] Amd/Fujitsu Extended Query Table at 0x0040
[ 2.150000] Amd/Fujitsu Extended Query version 1.1.
[ 2.160000] number of CFI chips: 1
[ 2.180000] 4 ofpart partitions found on MTD device 1c000000.nor-flash
[ 2.200000] Creating 4 MTD partitions on "1c000000.nor-flash":
[ 2.210000] 0x000000000000-0x000000030000 : "u-boot"
[ 2.220000] 0x000000030000-0x000000040000 : "u-boot-env"
[ 2.230000] 0x000000040000-0x000000050000 : "factory"
[ 2.240000] 0x000000050000-0x000000800000 : "firmware"
[ 2.260000] 2 uimage-fw partitions found on MTD device firmware
[ 2.270000] 0x000000050000-0x0000001713ec : "kernel"
[ 2.280000] 0x0000001713ec-0x000000800000 : "rootfs"
[ 2.290000] mtd: device 5 (rootfs) set to be root filesystem
[ 2.300000] 1 squashfs-split partitions found on MTD device rootfs
[ 2.310000] 0x000000390000-0x000000800000 : "rootfs_data"
[ 2.330000] libphy: mdio: probed
[ 2.340000] switch0: Atheros AR8327 rev. 2 switch registered on mdio-bus
[ 2.350000] Atheros AR8216/AR8236/AR8316: probe of mdio-bus:00 failed with error -22
[ 2.370000] ralink_soc_eth 10100000.ethernet: incorrect phy-mode -22
[ 2.380000] ralink_soc_eth 10100000.ethernet eth0: ralink at 0xb0100000, irq 5
[ 2.400000] rt2880_wdt 10000120.watchdog: Initialized
[ 2.410000] TCP: cubic registered
[ 2.410000] NET: Registered protocol family 17
[ 2.420000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 2.450000] Bridge firewalling registered
[ 2.460000] 8021q: 802.1Q VLAN Support v1.8
[ 2.470000] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
[ 2.490000] Freeing unused kernel memory: 148K (8033b000 - 80360000)
[ 3.310000] init: Console is alive
[ 3.320000] init: - watchdog -
[ 4.330000] init: - preinit -
[ 4.750000] 8021q: adding VLAN 0 to HW filter on device eth0
[ 4.790000] random: procd urandom read with 7 bits of entropy available
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 8.080000] jffs2: notice: (299) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 8.120000] mount_root: switching to jffs2 overlay
[ 8.150000] procd: - early -
[ 8.160000] procd: - watchdog -
[ 8.940000] procd: - ubus -
[ 9.960000] procd: - init -
Please press Enter to activate this console.
[ 10.930000] NET: Registered protocol family 10
[ 10.940000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 10.970000] Loading modules backported from Linux version master-2015-03-09-0-g141f155
[ 10.980000] Backport generated by backports.git backports-20150129-0-gdd4a670
[ 11.000000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 11.020000] nf_conntrack version 0.5.0 (959 buckets, 3836 max)
[ 11.070000] xt_time: kernel timezone is -0000
[ 11.110000] cfg80211: Calling CRDA to update world regulatory domain
[ 11.170000] cfg80211: World regulatory domain updated:
[ 11.180000] cfg80211: DFS Master region: unset
[ 11.180000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 11.200000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 11.220000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 11.240000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 11.250000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 11.270000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 11.290000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 11.310000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 11.320000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 11.380000] PPP generic driver version 2.4.2
[ 11.400000] NET: Registered protocol family 24
[ 11.440000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[ 11.450000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3593, rev 0402 detected
[ 11.470000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 000d detected
[ 11.490000] rt2800_wmac 10180000.wmac: failed to load eeprom property
[ 11.500000] ieee80211 phy1: rt2x00lib_request_eeprom_file: Info - Loading EEPROM data from 'soc_wmac.eeprom'.
[ 11.520000] rt2800_wmac 10180000.wmac: Direct firmware load for soc_wmac.eeprom failed with error -2
[ 11.540000] rt2800_wmac 10180000.wmac: Falling back to user helper
[ 11.640000] firmware soc_wmac.eeprom: firmware_loading_store: map pages failed
[ 11.660000] ieee80211 phy1: rt2x00lib_request_eeprom_file: Error - Failed to request EEPROM.
[ 11.680000] rt2800_wmac: probe of 10180000.wmac failed with error -11
[ 19.590000] 8021q: adding VLAN 0 to HW filter on device eth0
[ 19.610000] device eth0.1 entered promiscuous mode
[ 19.620000] device eth0 entered promiscuous mode
[ 19.650000] br-lan: port 1(eth0.1) entered forwarding state
[ 19.660000] br-lan: port 1(eth0.1) entered forwarding state
[ 21.660000] br-lan: port 1(eth0.1) entered forwarding state
[ 80.950000] random: nonblocking pool is initialized

Attachments (0)

Change History (2)

comment:1 Changed 18 months ago by dbobadilla001@…

it's a duplicate of ​/ticket/20644.html. close ticket

comment:2 Changed 18 months ago by dbobadilla001@…

Successful!! Test images available at:
http://downloads.lede-project.org/snapshots/targets/ramips/rt3883/
Works perfectly on my TEW-692GR!!internal switch ok and also WiFi 2,4Ghz&5Ghz. Thanks to mkresin

Add Comment

Modify Ticket

Action
as new .
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.