Modify

Opened 20 months ago

#22460 new defect

Sagemcom F@ST2704V2, boot failure, trunk

Reported by: mikecz Owned by: developers
Priority: highest Milestone: Designated Driver (Trunk)
Component: base system Version: Trunk
Keywords: Cc:

Description

15.05.1 boots and works, latest snapshot does not.

Below is serial port output on boot. The image was built from code from between 15.05.1 and current trunk (current trunk gave similar if not exactly the same errors).


CFE version 5.38.7 for BCM96328 (32bit,SP,BE)
Build Date: Fri Aug 10 17:44:02 CST 2012 (liruicong@…)
Copyright (C) 2005-2010 SAGEM Corporation.

HS Serial flash device: name S25FL064, id 0x0116 size 8192KB
Total Flash size: 8192K with 128 sectors
Chip ID: BCM6328B0, MIPS: 320MHz, DDR: 320MHz, Bus: 160MHz
Main Thread: TP0
Memory Test Passed
Total Memory: 67108864 bytes (64MB)
Boot Address: 0xb8000000

Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Board Id (0-5) : F@ST2704V2
Number of MAC Addresses (1-32) : 10
Base MAC Address : 00:10:18:00:00:00
PSI Size (1-64) KBytes : 40
Enable Backup PSI [0|1] : 0
System Log Size (0-256) KBytes : 0
Main Thread Number [0|1] : 0

* Press any key to stop auto run (1 seconds) *
Auto run second count down: 0
Booting from only image (0xb8010000) ...
Code Address: 0x80A00000, Entry Address: 0x80a00000
LZMA: Prossible old LZMA format, trying to decompress..
Decompression OK!
Entry at 0x80a00000
Closing network.
Disabling Switch ports.
Flushing Receive Buffers...
0 buffers found.
Closing DMA Channels.
Starting program at 0x80a00000
Exception 32: EPC=80620240, Cause=80A00000 (Interrupt)

RA=C2D6BD99, VAddr=8073921B

0 ($00) = 80626BB0 AT ($01) = 80612CCC
v0 ($02) = 00000000 v1 ($03) = 80626BB0
a0 ($04) = 53746172 a1 ($05) = 2070726F
a2 ($06) = 20617420 a3 ($07) = 61303030
t0 ($08) = 20307838 t1 ($09) = 3030300A
t2 ($10) = 2C20456E t3 ($11) = 41646472
t4 ($12) = 20307838 t5 ($13) = 3030300A
t6 ($14) = 98789711 t7 ($15) = F17D6D6B
s0 ($16) = AC0EA197 s1 ($17) = E5FFB5A9
s2 ($18) = 51519493 s3 ($19) = 5CCF7377
s4 ($20) = 675D4E28 s5 ($21) = 4B0DC573
s6 ($22) = 42DBED39 s7 ($23) = 09FC3165
t8 ($24) = D07C419F t9 ($25) = D66DDCC5
k0 ($26) = 0E8443E0 k1 ($27) = 37BC8362
gp ($28) = 2CFC47C4 sp ($29) = 1842F64B
fp ($30) = 0456496E ra ($31) = C2D6BD99

Exception 32: EPC=80622D18, Cause=00000020 (Syscall )

RA=FFFFFFFF, VAddr=00000020

0 ($00) = 0A002020 AT ($01) = 66702028
v0 ($02) = 203D2030 v1 ($03) = 39364520
a0 ($04) = 72612028 a1 ($05) = 203D2043
a2 ($06) = 4439390A a3 ($07) = 0A00FFFF
t0 ($08) = FFFFFFFF t1 ($09) = FFFFFFFF
t2 ($10) = FFFFFFFF t3 ($11) = FFFFFFFF
t4 ($12) = FFFFFFFF t5 ($13) = FFFFFFFF
t6 ($14) = FFFFFFFF t7 ($15) = 80613A88
s0 ($16) = FFFFFFFF s1 ($17) = FFFFFFFF
s2 ($18) = 80614380 s3 ($19) = FFFFFFFF
s4 ($20) = FFFFFFFF s5 ($21) = 00000000
s6 ($22) = 00000000 s7 ($23) = FFFFFFFF
t8 ($24) = 00000000 t9 ($25) = 00000000
k0 ($26) = FFFFFFFF k1 ($27) = FFFFFFFF
gp ($28) = FFFFFFFF sp ($29) = FFFFFFFF
fp ($30) = FFFFFFFF ra ($31) = FFFFFFFF

Exception 32: EPC=80622D18, Cause=00000020 (Syscall )

RA=00000000, VAddr=00000020

0 ($00) = 0A002020 AT ($01) = 66702028
v0 ($02) = 203D2046 v1 ($03) = 46464620
a0 ($04) = 72612028 a1 ($05) = 203D2046
a2 ($06) = 4646460A a3 ($07) = 0A006C69
t0 ($08) = 693D6263 t1 ($09) = 78785F66
t2 ($10) = 726E656C t3 ($11) = 20703D30
t4 ($12) = 00000000 t5 ($13) = 00000000

...and more.

Attachments (0)

Change History (0)

Add Comment

Modify Ticket

Action
as new .
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.