Modify

Opened 20 months ago

Last modified 19 months ago

#22441 new defect

rootfs mounted as read-only

Reported by: chatoooo@… Owned by: developers
Priority: normal Milestone: Designated Driver (Trunk)
Component: base system Version: Trunk
Keywords: Cc:

Description

I build the latest master branch commit cda52dcb329e02674175b60426be26cd813294a6 for RPi3. After flashing this build device was not accessible over the network. So I connected serial cable and noticed that rootfs is mounted as read-only. System does not try to remount rootfs as RW.

root@OpenWrt:/# dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.4.7 (honza@honza-VirtualBox) (gcc version 5.3.0 (OpenWrt GCC 5.3.0 r49377) ) #1 SMP Sat May 28 17:40:51 UTC 2016
[    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2
[    0.000000] cma: Reserved 16 MiB at 0x3a000000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 241664
[    0.000000] free_area_init_node: node 0, pgdat 80578ec0, node_mem_map b988e000
[    0.000000]   Normal zone: 1888 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 241664 pages, LIFO batch:31
[    0.000000] [bcm2709_smp_init_cpus] enter (9480->f3003010)
[    0.000000] [bcm2709_smp_init_cpus] ncores=4
[    0.000000] PERCPU: Embedded 12 pages/cpu @b984f000 s17984 r8192 d22976 u49152
[    0.000000] pcpu-alloc: s17984 r8192 d22976 u49152 alloc=12*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 239776
[    0.000000] Kernel command line: 8250.nr_uarts=1 dma.dmachans=0x7f35 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2709.boardrev=0xa02082 bcm2709.serial=0xceb4d576 smsc95xx.macaddr=B8:27:EB:B4:D5:76 bcm2708_fb.fbswap=1 bcm2709.uart_clock=3000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 kgdboc=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 935540K/966656K available (3922K kernel code, 124K rwdata, 1408K rodata, 220K init, 368K bss, 14732K reserved, 16384K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xbb800000 - 0xff800000   (1088 MB)
[    0.000000]     lowmem  : 0x80000000 - 0xbb000000   ( 944 MB)
[    0.000000]     modules : 0x7f000000 - 0x80000000   (  16 MB)
[    0.000000]       .text : 0x80008000 - 0x8053cd2c   (5332 kB)
[    0.000000]       .init : 0x8053d000 - 0x80574000   ( 220 kB)
[    0.000000]       .data : 0x80574000 - 0x8059322c   ( 125 kB)
[    0.000000]        .bss : 0x8059322c - 0x805ef2ac   ( 369 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] Architected cp15 timer(s) running at 19.20MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000008] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000023] Switching to timer-based delay loop, resolution 52ns
[    0.000197] Console: colour dummy device 80x30
[    0.000835] console [tty1] enabled
[    0.000877] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.000931] pid_max: default: 32768 minimum: 301
[    0.001062] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001094] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001776] CPU: Testing write buffer coherency: ok
[    0.002217] CPU0: update cpu_capacity 1024
[    0.002247] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.002275] [bcm2709_smp_prepare_cpus] enter
[    0.002389] Setting up static identity map for 0x8240 - 0x8298
[    0.003589] [bcm2709_boot_secondary] cpu:1 started (0) 18
[    0.003865] [bcm2709_secondary_init] enter cpu:1
[    0.003894] CPU1: update cpu_capacity 1024
[    0.003900] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.004202] [bcm2709_boot_secondary] cpu:2 started (0) 18
[    0.004402] [bcm2709_secondary_init] enter cpu:2
[    0.004421] CPU2: update cpu_capacity 1024
[    0.004427] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.004710] [bcm2709_boot_secondary] cpu:3 started (0) 18
[    0.004893] [bcm2709_secondary_init] enter cpu:3
[    0.004911] CPU3: update cpu_capacity 1024
[    0.004917] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.004969] Brought up 4 CPUs
[    0.005060] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[    0.005086] CPU: All CPU(s) started in HYP mode.
[    0.005109] CPU: Virtualization extensions available.
[    0.013413] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[    0.013733] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.014400] pinctrl core: initialized pinctrl subsystem
[    0.014889] NET: Registered protocol family 16
[    0.019946] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[    0.049943] cpuidle: using governor ladder
[    0.079962] cpuidle: using governor menu
[    0.085452] bcm2709: Mini UART enabled
[    0.085552] Serial: AMBA PL011 UART driver
[    0.085698] uart-pl011 3f201000.uart: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[    0.085885] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[    0.140859] bcm2835-dma 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0x1
[    0.142212] SCSI subsystem initialized
[    0.142388] usbcore: registered new interface driver usbfs
[    0.142484] usbcore: registered new interface driver hub
[    0.142568] usbcore: registered new device driver usb
[    0.150042] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-03-04 17:53
[    0.177037] clocksource: Switched to clocksource arch_sys_counter
[    0.184816] NET: Registered protocol family 2
[    0.185382] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.185516] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.185723] TCP: Hash tables configured (established 8192 bind 8192)
[    0.185827] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.185892] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.186092] NET: Registered protocol family 1
[    0.187779] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.196438] io scheduler noop registered
[    0.196478] io scheduler deadline registered
[    0.196535] io scheduler cfq registered (default)
[    0.198955] BCM2708FB: allocated DMA memory fa400000
[    0.199000] BCM2708FB: allocated DMA channel 0 @ f3007000
[    0.203733] Console: switching to colour frame buffer device 82x26
[    0.207649] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.210280] console [ttyS0] disabled
[    0.211526] 3f215040.uart: ttyS0 at MMIO 0x3f215040 (irq = 59, base_baud = 50000000) is a 16550
[    1.162999] console [ttyS0] enabled
[    1.170477] vc-cma: Videocore CMA driver
[    1.178040] vc-cma: vc_cma_base      = 0x00000000
[    1.186838] vc-cma: vc_cma_size      = 0x00000000 (0 MiB)
[    1.196734] vc-cma: vc_cma_initial   = 0x00000000 (0 MiB)
[    1.206723] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
[    1.233259] brd: module loaded
[    1.246069] loop: module loaded
[    1.253028] vchiq: vchiq_init_state: slot_zero = 0xba480000, is_master = 0
[    1.266860] usbcore: registered new interface driver smsc95xx
[    1.277329] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    1.488002] Core Release: 2.80a
[    1.494204] Setting default values for core params
[    1.503136] Finished setting default values for core params
[    1.713617] Using Buffer DMA mode
[    1.720134] Periodic Transfer Interrupt Enhancement - disabled
[    1.730760] Multiprocessor Interrupt Enhancement - disabled
[    1.740961] OTG VER PARAM: 0, OTG VER FLAG: 0
[    1.749151] Dedicated Tx FIFOs mode
[    1.756094] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xba414000 dma = 0xfa414000 len=9024
[    1.774344] FIQ FSM acceleration enabled for :
[    1.774344] Non-periodic Split Transactions
[    1.774344] Periodic Split Transactions
[    1.774344] High-Speed Isochronous Endpoints
[    1.806141] dwc_otg: Microframe scheduler enabled
[    1.806189] WARN::hcd_init_fiq:413: FIQ on core 1 at 0x80296154
[    1.816960] WARN::hcd_init_fiq:414: FIQ ASM at 0x8000ee78 length 36
[    1.828292] WARN::hcd_init_fiq:439: MPHI regs_base at 0xbb87e000
[    1.839251] dwc_otg 3f980000.usb: DWC OTG Controller
[    1.848496] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[    1.861558] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[    1.871791] Init: Port Power? op_state=1
[    1.879281] Init: Power Port (0)
[    1.885790] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.897972] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.910849] usb usb1: Product: DWC OTG Controller
[    1.919612] usb usb1: Manufacturer: Linux 4.4.7 dwc_otg_hcd
[    1.929783] usb usb1: SerialNumber: 3f980000.usb
[    1.938969] hub 1-0:1.0: USB hub found
[    1.946172] hub 1-0:1.0: 1 port detected
[    1.954091] dwc_otg: FIQ enabled
[    1.954100] dwc_otg: NAK holdoff enabled
[    1.954107] dwc_otg: FIQ split-transaction FSM enabled
[    1.954134] Module dwc_common_port init
[    1.954298] usbcore: registered new interface driver uas
[    1.964066] usbcore: registered new interface driver usb-storage
[    1.974960] mousedev: PS/2 mouse device common for all mice
[    1.985857] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[    1.998254] sdhci: Secure Digital Host Controller Interface driver
[    2.009390] sdhci: Copyright(c) Pierre Ossman
[    2.017800] sdhost: log_buf @ ba413000 (fa413000)
[    2.097051] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[    2.109271] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[    2.119853] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[    2.147187] Indeed it is in host mode hprt0 = 00021501
[    2.158128] mmc0: host does not support reading read-only switch, assuming write-enable
[    2.167123] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.168803] NET: Registered protocol family 10
[    2.169620] NET: Registered protocol family 17
[    2.169669] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    2.169679] 8021q: 802.1Q VLAN Support v1.8
[    2.170129] Registering SWP/SWPB emulation handler
[    2.170717] vc-sm: Videocore shared memory driver
[    2.170724] [vc_sm_connected_init]: start
[    2.216937] [vc_sm_connected_init]: end - returning 0
[    2.219479] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[    2.282684] Waiting for root device /dev/mmcblk0p2...
[    2.292262] mmc0: new high speed SDHC card at address 0001
[    2.302905] mmcblk0: mmc0:0001 SD8GB 7.32 GiB
[    2.313353]  mmcblk0: p1 p2
[    2.327054] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    2.337663] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    2.339193] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.340720] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.343464] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    2.379122] Indeed it is in host mode hprt0 = 00001101
[    2.414945] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    2.430359] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    2.442892] Freeing unused kernel memory: 220K (8053d000 - 80574000)
[    2.470046] mmc1: new high speed SDIO card at address 0001
[    2.587368] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[    2.599499] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.612552] init: Console is alive
[    2.612962] hub 1-1:1.0: USB hub found
[    2.613046] hub 1-1:1.0: 5 ports detected
[    2.634363] init: - watchdog -
[    2.887067] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    2.914823] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.927215] ehci-platform: EHCI generic platform driver
[    2.939412] init: - preinit -
[    3.007282] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    3.019672] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.035743] smsc95xx v1.0.4
[    3.035878] random: procd urandom read with 75 bits of entropy available
[    3.110014] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:b4:d5:76
[    6.155191] procd: - early -
[    6.161376] procd: - watchdog -
[    6.782005] procd: - ubus -
[    6.842306] procd: - init -
[    7.248204] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    7.268786] hidraw: raw HID events driver (C) Jiri Kosina
[    7.317997] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68
[    7.332569] Backport generated by backports.git backports-20151218-0-g2f58d9d
[    7.347215] ip_tables: (C) 2000-2006 Netfilter Core Team
[    7.361732] nf_conntrack version 0.5.0 (14877 buckets, 59508 max)
[    7.500211] usbcore: registered new interface driver usbhid
[    7.510627] usbhid: USB HID core driver
[    7.519878] usbcore: registered new interface driver usbserial
[    7.530712] usbcore: registered new interface driver usbserial_generic
[    7.542606] usbserial: USB Serial support registered for generic
[    7.559918] xt_time: kernel timezone is -0000
[    7.579114] usbcore: registered new interface driver ftdi_sio
[    7.589778] usbserial: USB Serial support registered for FTDI USB Serial Device
[    7.607702] usbcore: registered new interface driver pl2303
[    7.618069] usbserial: USB Serial support registered for pl2303
[    7.630449] PPP generic driver version 2.4.2
[    7.639455] NET: Registered protocol family 24
[    7.656874] brcmfmac: brcmf_sdio_drivestrengthinit: No SDIO Drive strength init done for chip 43430 rev 1 pmurev 24
[    7.736815] random: nonblocking pool is initialized
[    7.808801] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Dec 15 2015 18:10:45 version 7.45.41.23 (r606571) FWID 01-cc4eda9c
[    7.851446] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code (0x30 0x30)
[    7.870316] usbcore: registered new interface driver brcmfmac

root@OpenWrt:/# mount
/dev/root on / type ext4 (ro,relatime,data=ordered)
proc on /proc type proc (rw,nosuid,nodev,noexec,noatime)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,noatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
tmpfs on /dev type tmpfs (rw,nosuid,relatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,mode=600)
debugfs on /sys/kernel/debug type debugfs (rw,noatime)

So I tried to build the version that worked for me. It is commit 42b940c820e772ffe39a16e789a736a8751f4409. This version remounts rootfs as expected.

root@OpenWrt:/# dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.4.7 (honza@honza-VirtualBox) (gcc version 5.3.0 (OpenWrt GCC 5.3.0 r49377) ) #3 SMP Sat May 28 18:24:46 UTC 2016
[    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2
[    0.000000] cma: Reserved 16 MiB at 0x3a000000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] [bcm2709_smp_init_cpus] enter (9480->f3003010)
[    0.000000] [bcm2709_smp_init_cpus] ncores=4
[    0.000000] PERCPU: Embedded 12 pages/cpu @b984f000 s17984 r8192 d22976 u49152
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 239776
[    0.000000] Kernel command line: 8250.nr_uarts=1 dma.dmachans=0x7f35 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2709.boardrev=0xa02082 bcm2709.serial=0xceb4d576 smsc95xx.macaddr=B8:27:EB:B4:D5:76 bcm2708_fb.fbswap=1 bcm2709.uart_clock=3000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 kgdboc=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 935540K/966656K available (3922K kernel code, 124K rwdata, 1408K rodata, 220K init, 368K bss, 14732K reserved, 16384K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xbb800000 - 0xff800000   (1088 MB)
[    0.000000]     lowmem  : 0x80000000 - 0xbb000000   ( 944 MB)
[    0.000000]     modules : 0x7f000000 - 0x80000000   (  16 MB)
[    0.000000]       .text : 0x80008000 - 0x8053cd2c   (5332 kB)
[    0.000000]       .init : 0x8053d000 - 0x80574000   ( 220 kB)
[    0.000000]       .data : 0x80574000 - 0x8059322c   ( 125 kB)
[    0.000000]        .bss : 0x8059322c - 0x805ef2ac   ( 369 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] Architected cp15 timer(s) running at 19.20MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000008] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000023] Switching to timer-based delay loop, resolution 52ns
[    0.000194] Console: colour dummy device 80x30
[    0.000833] console [tty1] enabled
[    0.000875] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.000930] pid_max: default: 32768 minimum: 301
[    0.001059] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001092] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001767] CPU: Testing write buffer coherency: ok
[    0.002199] CPU0: update cpu_capacity 1024
[    0.002229] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.002257] [bcm2709_smp_prepare_cpus] enter
[    0.002370] Setting up static identity map for 0x8240 - 0x8298
[    0.003581] [bcm2709_boot_secondary] cpu:1 started (0) 17
[    0.003880] [bcm2709_secondary_init] enter cpu:1
[    0.003908] CPU1: update cpu_capacity 1024
[    0.003914] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.004215] [bcm2709_boot_secondary] cpu:2 started (0) 18
[    0.004419] [bcm2709_secondary_init] enter cpu:2
[    0.004438] CPU2: update cpu_capacity 1024
[    0.004444] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.004728] [bcm2709_boot_secondary] cpu:3 started (0) 18
[    0.004910] [bcm2709_secondary_init] enter cpu:3
[    0.004929] CPU3: update cpu_capacity 1024
[    0.004935] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.004986] Brought up 4 CPUs
[    0.005076] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[    0.005102] CPU: All CPU(s) started in HYP mode.
[    0.005126] CPU: Virtualization extensions available.
[    0.013429] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[    0.013744] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.014409] pinctrl core: initialized pinctrl subsystem
[    0.014897] NET: Registered protocol family 16
[    0.019960] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[    0.049941] cpuidle: using governor ladder
[    0.079959] cpuidle: using governor menu
[    0.085444] bcm2709: Mini UART enabled
[    0.085545] Serial: AMBA PL011 UART driver
[    0.085691] uart-pl011 3f201000.uart: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[    0.085876] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[    0.140867] bcm2835-dma 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0x1
[    0.142220] SCSI subsystem initialized
[    0.142395] usbcore: registered new interface driver usbfs
[    0.142491] usbcore: registered new interface driver hub
[    0.142575] usbcore: registered new device driver usb
[    0.150043] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-03-04 17:53
[    0.177033] clocksource: Switched to clocksource arch_sys_counter
[    0.184812] NET: Registered protocol family 2
[    0.185377] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.185510] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.185717] TCP: Hash tables configured (established 8192 bind 8192)
[    0.185821] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.185886] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.186088] NET: Registered protocol family 1
[    0.187771] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.196441] io scheduler noop registered
[    0.196481] io scheduler deadline registered
[    0.196538] io scheduler cfq registered (default)
[    0.198963] BCM2708FB: allocated DMA memory fa400000
[    0.199008] BCM2708FB: allocated DMA channel 0 @ f3007000
[    0.203736] Console: switching to colour frame buffer device 82x26
[    0.207659] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.210292] console [ttyS0] disabled
[    0.211539] 3f215040.uart: ttyS0 at MMIO 0x3f215040 (irq = 59, base_baud = 50000000) is a 16550
[    1.163015] console [ttyS0] enabled
[    1.170491] vc-cma: Videocore CMA driver
[    1.178055] vc-cma: vc_cma_base      = 0x00000000
[    1.186856] vc-cma: vc_cma_size      = 0x00000000 (0 MiB)
[    1.196754] vc-cma: vc_cma_initial   = 0x00000000 (0 MiB)
[    1.206746] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
[    1.233305] brd: module loaded
[    1.246113] loop: module loaded
[    1.253068] vchiq: vchiq_init_state: slot_zero = 0xba480000, is_master = 0
[    1.266903] usbcore: registered new interface driver smsc95xx
[    1.277375] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    1.488049] Core Release: 2.80a
[    1.494255] Setting default values for core params
[    1.503187] Finished setting default values for core params
[    1.713669] Using Buffer DMA mode
[    1.720187] Periodic Transfer Interrupt Enhancement - disabled
[    1.730813] Multiprocessor Interrupt Enhancement - disabled
[    1.741017] OTG VER PARAM: 0, OTG VER FLAG: 0
[    1.749210] Dedicated Tx FIFOs mode
[    1.756158] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xba414000 dma = 0xfa414000 len=9024
[    1.774411] FIQ FSM acceleration enabled for :
[    1.774411] Non-periodic Split Transactions
[    1.774411] Periodic Split Transactions
[    1.774411] High-Speed Isochronous Endpoints
[    1.806264] WARN::hcd_init_fiq:413: FIQ on core 1 at 0x80296154
[    1.817039] WARN::hcd_init_fiq:414: FIQ ASM at 0x8000ee78 length 36
[    1.828371] WARN::hcd_init_fiq:439: MPHI regs_base at 0xbb87e000
[    1.839330] dwc_otg 3f980000.usb: DWC OTG Controller
[    1.848577] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[    1.861639] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[    1.871872] Init: Port Power? op_state=1
[    1.879362] Init: Power Port (0)
[    1.885867] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.898050] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.910927] usb usb1: Product: DWC OTG Controller
[    1.919692] usb usb1: Manufacturer: Linux 4.4.7 dwc_otg_hcd
[    1.929862] usb usb1: SerialNumber: 3f980000.usb
[    1.939045] hub 1-0:1.0: USB hub found
[    1.946246] hub 1-0:1.0: 1 port detected
[    1.954377] usbcore: registered new interface driver uas
[    1.964144] usbcore: registered new interface driver usb-storage
[    1.975039] mousedev: PS/2 mouse device common for all mice
[    1.985935] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[    1.998332] sdhci: Secure Digital Host Controller Interface driver
[    2.009468] sdhci: Copyright(c) Pierre Ossman
[    2.017880] sdhost: log_buf @ ba413000 (fa413000)
[    2.097048] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[    2.109270] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[    2.119852] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[    2.147185] Indeed it is in host mode hprt0 = 00021501
[    2.158137] mmc0: host does not support reading read-only switch, assuming write-enable
[    2.167120] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.168800] NET: Registered protocol family 10
[    2.169621] NET: Registered protocol family 17
[    2.169669] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    2.169679] 8021q: 802.1Q VLAN Support v1.8
[    2.170128] Registering SWP/SWPB emulation handler
[    2.170715] vc-sm: Videocore shared memory driver
[    2.170722] [vc_sm_connected_init]: start
[    2.216936] [vc_sm_connected_init]: end - returning 0
[    2.219486] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[    2.282706] Waiting for root device /dev/mmcblk0p2...
[    2.292280] mmc0: new high speed SDHC card at address 0001
[    2.302932] mmcblk0: mmc0:0001 SD8GB 7.32 GiB
[    2.313386]  mmcblk0: p1 p2
[    2.327050] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    2.337687] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    2.339219] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.340748] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.343485] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    2.379118] Indeed it is in host mode hprt0 = 00001101
[    2.414955] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    2.430369] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    2.442902] Freeing unused kernel memory: 220K (8053d000 - 80574000)
[    2.469997] mmc1: new high speed SDIO card at address 0001
[    2.587356] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[    2.599483] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.612531] hub 1-1:1.0: USB hub found
[    2.612583] init: Console is alive
[    2.612738] init: - watchdog -
[    2.632779] hub 1-1:1.0: 5 ports detected
[    2.886400] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.898789] ehci-platform: EHCI generic platform driver
[    2.917063] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    2.929162] init: - preinit -
[    3.047411] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    3.059811] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.075777] smsc95xx v1.0.4
[    3.082052] random: procd urandom read with 77 bits of entropy available
[    3.139960] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:b4:d5:76
[    5.132898] mount_root: mounting /dev/root
[    5.151625] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    5.231184] procd: - early -
[    5.237278] procd: - watchdog -
[    5.852933] procd: - ubus -
[    5.913637] procd: - init -
[    6.314870] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    6.334852] hidraw: raw HID events driver (C) Jiri Kosina
[    6.384059] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68
[    6.398575] Backport generated by backports.git backports-20151218-0-g2f58d9d
[    6.413136] ip_tables: (C) 2000-2006 Netfilter Core Team
[    6.427633] nf_conntrack version 0.5.0 (14877 buckets, 59508 max)
[    6.540165] usbcore: registered new interface driver usbhid
[    6.550537] usbhid: USB HID core driver
[    6.559769] usbcore: registered new interface driver usbserial
[    6.570579] usbcore: registered new interface driver usbserial_generic
[    6.582446] usbserial: USB Serial support registered for generic
[    6.599742] xt_time: kernel timezone is -0000
[    6.618764] usbcore: registered new interface driver ftdi_sio
[    6.629372] usbserial: USB Serial support registered for FTDI USB Serial Device
[    6.647093] usbcore: registered new interface driver pl2303
[    6.657430] usbserial: USB Serial support registered for pl2303
[    6.669770] PPP generic driver version 2.4.2
[    6.678913] NET: Registered protocol family 24
[    6.696396] brcmfmac: brcmf_sdio_drivestrengthinit: No SDIO Drive strength init done for chip 43430 rev 1 pmurev 24
[    6.775191] random: nonblocking pool is initialized
[    6.847784] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Dec 15 2015 18:10:45 version 7.45.41.23 (r606571) FWID 01-cc4eda9c
[    6.890342] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code (0x30 0x30)
[    6.909179] usbcore: registered new interface driver brcmfmac
[   10.088786] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[   10.103962] device eth0 entered promiscuous mode
[   10.114944] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
root@OpenWrt:/# mount
/dev/root on / type ext4 (rw,noatime,data=ordered)
proc on /proc type proc (rw,nosuid,nodev,noexec,noatime)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,noatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
/dev/mmcblk0p1 on /boot type vfat (rw,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
tmpfs on /dev type tmpfs (rw,nosuid,relatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,mode=600)
debugfs on /sys/kernel/debug type debugfs (rw,noatime)

Attachments (0)

Change History (1)

comment:1 Changed 19 months ago by anonymous

Same thing happens with BananaPro (Allwinner A20) target :(

Add Comment

Modify Ticket

Action
as new .
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.