Modify

Opened 12 years ago

Closed 12 years ago

#219 closed defect (fixed)

Tickets #214, #215 verified again on version 3007 on two different wgt634u devices..

Reported by: twiddlebits@… Owned by: nbd
Priority: normal Milestone:
Component: base system Version: 2.0
Keywords: vlan1 wan interface does't work Cc: twiddlebits@…

Description

Sorry to be insistent about this, but I have replicated the behaviour on two different wgt634u devices now. I wiped the flash0.os with two zero'ed files on both devices, performed make distclean, upgraded to version 3007, selected only the linux kernel version 2.6 option, performed the make and burned the image to both wgt634u's. Rebooted them and got the same results on each unit. The problem appears to be the RX packets are not connected to the protocol stack for the vlan1 (robo-switch connected?). The RX packet count is always zero for vlan1. I have another wgt634u device running an earlier version software that is operating just fine. I can reboot the two defective wgt634u devices into the CFE and obtain a DHCP supplied IP address with no problems.

root@OpenWrt:/# ifconfig
br0 Link encap:Ethernet HWaddr xx:xx:xx:xx:xx:xx

inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:345 errors:0 dropped:0 overruns:0 frame:0
TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:20813 (20.3 KiB) TX bytes:1180 (1.1 KiB)

eth0 Link encap:Ethernet HWaddr xx:xx:xx:xx:xx:xx

UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
RX packets:360 errors:0 dropped:0 overruns:0 frame:0
TX packets:23 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:29547 (28.8 KiB) TX bytes:13754 (13.4 KiB)
Interrupt:4

lo Link encap:Local Loopback

inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

vlan0 Link encap:Ethernet HWaddr xx:xx:xx:xx:xx:xx

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:360 errors:0 dropped:0 overruns:0 frame:0
TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:23067 (22.5 KiB) TX bytes:1188 (1.1 KiB)

vlan1 Link encap:Ethernet HWaddr xx:xx:xx:xx:xx:xx

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:21 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:12474 (12.1 KiB)

There is no DHCP ip address assigned to the WAN interface (vlan1). Even manually assigning an IP address to the wan interface does not work.

vlan1 Link encap:Ethernet HWaddr xx:xx:xx:xx:xx:xx

inet addr:192.168.127.202 Bcast:192.168.127.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:15 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:8910 (8.7 KiB)

NOTICE RX packets is always zero ... I may hook up ethereal to see if the TX is really working.

root@OpenWrt:/# ifdown wan
root@OpenWrt:/# ifup wan
root@OpenWrt:/# info, udhcpc (v0.9.9-pre) started
debug, Sending discover...
debug, Sending discover...
debug, Sending discover...
info, No lease, forking to background.

I rebooted into the CFE and obtained the DHCP ip address just fine:

CFE> ifconfig eth0 -auto
Device eth0: hwaddr xx-xx-xx-xx-xx-xx, ipaddr 192.168.127.162, mask 255.255.250 gateway 192.168.127.3, nameserver 192.168.127.3, domain myhome.westell.m* command status = 0
CFE>

Is there a configuration modification I am missing? Perhaps some previous setup of the your /etc/ directory? I blew mine away with the two zero filed wipe files. Any hints or suggestions?

I'll blow away the openwrt directory and try a fresh download of everything in the meantime...

Thanks!

Attachments (0)

Change History (3)

comment:1 Changed 12 years ago by nbd

  • Cc twiddlebits@… added

comment:2 Changed 12 years ago by nbd

  • Owner changed from developers to nbd
  • Status changed from new to assigned

Hi. I wanted to write you directly, but your fscking braindead ISP 'verizon' is blocking all email from Germany.

Please show me the output to the following commands:
cat /etc/config/network
cat /proc/switch/eth0/vlan/0/ports
cat /proc/switch/eth0/vlan/1/ports

comment:3 Changed 12 years ago by nbd

  • Resolution set to fixed
  • Status changed from assigned to closed

fixed in [3105]

Add Comment

Modify Ticket

Action
as closed .
The resolution will be deleted. Next status will be 'reopened'.
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.