Modify

Opened 2 years ago

Last modified 23 months ago

#21813 new defect

Unable to set RTS / CTS thresholds with recent builds

Reported by: nbehnken@… Owned by: developers
Priority: normal Milestone: Designated Driver (Trunk)
Component: packages Version: Trunk
Keywords: ea4500 / e4200v2 Cc:

Description

RTS_TIMEOUT after 10000ms.

[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.18.26 (nick@ubuntu) (gcc version 5.2.0 (OpenWrt GCC 5.2.0 r48638) ) #1 Sat Feb 6 07:00:24 UTC 2016
[ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine model: Linksys E4200v2 / EA4500
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] free_area_init_node: node 0, pgdat c04c1fb4, node_mem_map c7efb000
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32768 pages, LIFO batch:7
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: console=ttyS0,115200 mtdparts=nand_mtd:512k(uboot)ro,128k@512k(u_env),128k@640k(s_env),26m@2m(kernel),26m@2m(rootfs)fs,26m@28m(alt_kernel),26m@28m(alt_rootfs)fs,74m@54m(syscfg) root=/dev/mtdblock4 ro rootfstype=jffs2 serial_number=12A10603232021 uuid=F32F525811FDE04EE12DFB1612195E78 hw_version=RGWM-C4_0GA device_mac=20:AA:4B:80:8E:99 factory_date=2012/03/12 wps_pin=75753382
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 124684K/131072K available (3650K kernel code, 154K rwdata, 988K rodata, 152K init, 193K bss, 6388K reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc048fd6c (4640 kB)
[ 0.000000] .init : 0xc0490000 - 0xc04b6000 ( 152 kB)
[ 0.000000] .data : 0xc04b6000 - 0xc04dc97c ( 155 kB)
[ 0.000000] .bss : 0xc04dc97c - 0xc050cd98 ( 194 kB)
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000015] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 21474836475ns
[ 0.000151] Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256)
[ 0.090089] pid_max: default: 32768 minimum: 301
[ 0.090232] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.090249] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.090709] CPU: Testing write buffer coherency: ok
[ 0.091031] Setting up static identity map for 0x10fe0 - 0x1101c
[ 0.091309] mvebu-soc-id: MVEBU SoC ID=0x6282, Rev=0x1
[ 0.093150] pinctrl core: initialized pinctrl subsystem
[ 0.093534] regulator-dummy: no parameters
[ 0.097491] NET: Registered protocol family 16
[ 0.097926] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.098736] cpuidle: using governor ladder
[ 0.099143] Feroceon L2: Enabling L2
[ 0.099184] Feroceon L2: Cache support initialised.
[ 0.099450] [Firmware Info]: /ocp@f1000000/ethernet-controller@72000/ethernet0-port@0: local-mac-address is not set
[ 0.099539] [Firmware Info]: /ocp@f1000000/ethernet-controller@76000/ethernet1-port@0: local-mac-address is not set
[ 0.107779] SCSI subsystem initialized
[ 0.108122] usbcore: registered new interface driver usbfs
[ 0.108200] usbcore: registered new interface driver hub
[ 0.108267] usbcore: registered new device driver usb
[ 0.109221] Switched to clocksource orion_clocksource
[ 0.110292] NET: Registered protocol family 2
[ 0.110941] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.110964] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.110983] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.111034] TCP: reno registered
[ 0.111046] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.111066] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.111248] NET: Registered protocol family 1
[ 0.111297] PCI: CLS 0 bytes, default 32
[ 0.112158] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.113187] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.113207] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.113468] msgmni has been set to 243
[ 0.124599] io scheduler noop registered
[ 0.124617] io scheduler deadline registered (default)
[ 0.125726] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
[ 0.126278] irq: Cannot allocate irq_descs @ IRQ31, assuming pre-allocated
[ 0.126603] irq: Cannot allocate irq_descs @ IRQ63, assuming pre-allocated
[ 0.127205] mvebu-pcie mbus:pcie-controller: PCI host bridge to bus 0000:00
[ 0.127222] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff]
[ 0.127233] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
[ 0.127245] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.127274] pci 0000:00:01.0: [11ab:6282] type 01 class 0x060400
[ 0.127477] pci 0000:00:02.0: [11ab:6282] type 01 class 0x060400
[ 0.127678] PCI: bus0: Fast back to back transfers disabled
[ 0.127691] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.127704] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.127837] pci 0000:01:00.0: [11ab:2a41] type 00 class 0x020000
[ 0.127883] pci 0000:01:00.0: reg 0x10: [mem 0x90000000-0x9000ffff 64bit]
[ 0.127915] pci 0000:01:00.0: reg 0x18: [mem 0x90010000-0x9001ffff 64bit]
[ 0.128200] PCI: bus1: Fast back to back transfers disabled
[ 0.128215] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.128348] pci 0000:02:00.0: [11ab:2a42] type 00 class 0x020000
[ 0.128391] pci 0000:02:00.0: reg 0x10: [mem 0x98000000-0x9800ffff 64bit]
[ 0.128422] pci 0000:02:00.0: reg 0x18: [mem 0x98010000-0x9801ffff 64bit]
[ 0.128702] PCI: bus2: Fast back to back transfers disabled
[ 0.128717] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[ 0.128825] pci 0000:00:01.0: BAR 8: assigned [mem 0xe0000000-0xe00fffff]
[ 0.128840] pci 0000:00:02.0: BAR 8: assigned [mem 0xe0100000-0xe01fffff]
[ 0.128856] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe000ffff 64bit]
[ 0.128883] pci 0000:01:00.0: BAR 2: assigned [mem 0xe0010000-0xe001ffff 64bit]
[ 0.128907] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.128920] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe00fffff]
[ 0.128937] pci 0000:02:00.0: BAR 0: assigned [mem 0xe0100000-0xe010ffff 64bit]
[ 0.128963] pci 0000:02:00.0: BAR 2: assigned [mem 0xe0110000-0xe011ffff 64bit]
[ 0.128986] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 0.128998] pci 0000:00:02.0: bridge window [mem 0xe0100000-0xe01fffff]
[ 0.160820] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.161808] console [ttyS0] disabled
[ 0.161883] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 26, base_baud = 12500000) is a 16550A
[ 0.705990] console [ttyS0] enabled
[ 0.710767] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1
[ 0.717145] nand: Hynix H27U1G8F2BTR-BC
[ 0.721022] nand: 128MiB, SLC, page size: 2048, OOB size: 64
[ 0.726716] Scanning device for bad blocks
[ 0.731466] Bad eraseblock 9 at 0x000000120000
[ 0.801514] mtd: bad character after partition (f)
[ 0.806347] 8 ofpart partitions found on MTD device orion_nand
[ 0.812216] Creating 8 MTD partitions on "orion_nand":
[ 0.817379] 0x000000000000-0x000000080000 : "u-boot"
[ 0.823098] 0x000000080000-0x0000000a0000 : "u_env"
[ 0.828644] 0x0000000a0000-0x0000000c0000 : "s_env"
[ 0.834233] 0x000000200000-0x000001c00000 : "kernel1"
[ 0.840047] 0x0000004a0000-0x000001c00000 : "ubi"
[ 0.845435] 0x000001c00000-0x000003600000 : "kernel2"
[ 0.851190] 0x000001ea0000-0x000003600000 : "rootfs2"
[ 0.856914] 0x000003600000-0x000008000000 : "syscfg"
[ 0.863156] libphy: orion_mdio_bus: probed
[ 0.867411] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[ 0.875479] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 20:aa:4b:80:8e:99
[ 0.884803] mv643xx_eth_port mv643xx_eth_port.1 eth1: port 0 with MAC address 20:aa:4b:80:8e:9a
[ 0.893614] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.900192] ehci-pci: EHCI PCI platform driver
[ 0.904728] ehci-platform: EHCI generic platform driver
[ 0.910118] ehci-orion: EHCI orion driver
[ 0.914290] orion-ehci f1050000.ehci: EHCI Host Controller
[ 0.919846] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
[ 0.927665] orion-ehci f1050000.ehci: irq 29, io mem 0xf1050000
[ 0.949272] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
[ 0.956050] hub 1-0:1.0: USB hub found
[ 0.959978] hub 1-0:1.0: 1 port detected
[ 0.964503] usbcore: registered new interface driver usb-storage
[ 0.971655] TCP: cubic registered
[ 0.975054] NET: Registered protocol family 10
[ 0.980665] NET: Registered protocol family 17
[ 0.985175] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 0.998004] 8021q: 802.1Q VLAN Support v1.8
[ 1.003717] UBI: auto-attach mtd4
[ 1.007057] UBI: attaching mtd4 to ubi0
[ 1.036174] UBI: scanning is finished
[ 1.046959] UBI: attached mtd4 (name "ubi", size 23 MiB) to ubi0
[ 1.053033] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
[ 1.059867] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 512
[ 1.066504] UBI: VID header offset: 512 (aligned 512), data offset: 2048
[ 1.073239] UBI: good PEBs: 187, bad PEBs: 0, corrupted PEBs: 0
[ 1.079182] UBI: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 1.086355] UBI: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 2004905630
[ 1.095448] UBI: available PEBs: 0, total reserved PEBs: 187, PEBs reserved for bad PEB handling: 20
[ 1.105170] UBI: ubiblock0_0 created from ubi0:0(rootfs)
[ 1.110528] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[ 1.117784] UBI: background thread "ubi_bgt0d" started, PID 431
[ 1.124447] mvsw61xx 10.mvsw61xx: Found MV88E6171 at f1072004.mdio-bu:10
[ 1.131204] mvsw61xx 10.mvsw61xx: Using indirect addressing
[ 1.136872] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.151474] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 1.159087] Freeing unused kernel memory: 152K (c0490000 - c04b6000)
[ 1.669214] init: Console is alive
[ 2.673979] init: - preinit -
[ 2.911465] random: procd urandom read with 30 bits of entropy available
[ 6.000429] UBIFS: background thread "ubifs_bgt0_1" started, PID 836
[ 6.062698] UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 6.069171] UBIFS: LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 6.078369] UBIFS: FS size: 17160192 bytes (16 MiB, 133 LEBs), journal size 1032193 bytes (0 MiB, 7 LEBs)
[ 6.087990] UBIFS: reserved for root: 810517 bytes (791 KiB)
[ 6.093688] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 7790515E-76DF-4AFE-8B48-3372F75CECA7, small LPT model
[ 6.105025] mount_root: overlay filesystem has not been fully initialized yet
[ 6.113070] mount_root: switching to jffs2 overlay
[ 6.191810] procd: - early -
[ 7.289191] procd: - ubus -
[ 8.293839] procd: - init -
[ 10.450167] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 10.472288] u32 classifier
[ 10.475008] input device check on
[ 10.478678] Actions configured
[ 10.488374] Mirror/redirect action on
[ 10.523870] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68
[ 10.531343] Backport generated by backports.git backports-20151218-0-g2f58d9d
[ 10.540535] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.551796] nf_conntrack version 0.5.0 (1950 buckets, 7800 max)
[ 10.746984] xt_time: kernel timezone is -0000
[ 10.851125] Marvell TOPDOG(R) 802.11 Wireless Network Driver version 0.13
[ 10.857965] pci 0000:00:01.0: enabling device (0140 -> 0142)
[ 11.811372] ieee80211 phy0: Command RF_ANTENNA error 0x2
[ 11.816717] ieee80211 phy0: failed to set # of RX antennas
[ 11.841692] ieee80211 phy0: Command RF_ANTENNA error 0x2
[ 11.847039] ieee80211 phy0: failed to set # of TX antennas
[ 11.852590] ieee80211 phy0: 88w8366 v48, 20aa4b808e9b, STA firmware 4.1.0.3
[ 11.861692] pci 0000:00:02.0: enabling device (0140 -> 0142)
[ 12.571809] ieee80211 phy1: Command RF_ANTENNA error 0x2
[ 12.577154] ieee80211 phy1: failed to set # of RX antennas
[ 12.582718] ieee80211 phy1: Command RF_ANTENNA error 0x2
[ 12.588052] ieee80211 phy1: failed to set # of TX antennas
[ 12.593589] ieee80211 phy1: 88w8366 v48, 20aa4b808e9d, STA firmware 4.1.0.3
[ 12.608996] PPP generic driver version 2.4.2
[ 12.622996] NET: Registered protocol family 24
[ 18.631720] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled
[ 18.663327] device eth0 entered promiscuous mode
[ 18.687261] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 26.589254] random: nonblocking pool is initialized
[ 29.269255] ieee80211 phy0: Command RTS_THRESHOLD timeout after 10000 ms
[ 39.269258] ieee80211 phy1: Command RTS_THRESHOLD timeout after 10000 ms
[ 39.278227] br-lan: port 1(eth0) entered forwarding state
[ 39.283726] br-lan: port 1(eth0) entered forwarding state
[ 39.316832] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 40.622622] ieee80211 phy0: 88w8366 v7, 20aa4b808e9b, AP firmware 5.2.8.17
[ 40.706501] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 40.823923] 0000:02:00.0: unable to load firmware helper image
[ 40.829908] ieee80211 phy1: Cannot start firmware
[ 40.834695] ieee80211 phy1: Trying to reload the firmware again
[ 41.279235] br-lan: port 1(eth0) entered forwarding state
[ 41.378273] ieee80211 phy1: 88w8366 v7, 20aa4b808e9d, AP firmware 5.2.8.17
[ 41.454526] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 41.462583] device wlan0 entered promiscuous mode
[ 41.516501] device wlan1 entered promiscuous mode
[ 41.872157] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 41.878696] br-lan: port 2(wlan0) entered forwarding state
[ 41.884261] br-lan: port 2(wlan0) entered forwarding state
[ 42.259631] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 42.266124] br-lan: port 3(wlan1) entered forwarding state
[ 42.271688] br-lan: port 3(wlan1) entered forwarding state
[ 43.879232] br-lan: port 2(wlan0) entered forwarding state
[ 44.269230] br-lan: port 3(wlan1) entered forwarding state

Attachments (0)

Change History (1)

comment:1 Changed 23 months ago by anonymous

Issue still present on trunk 3.18.27.

Add Comment

Modify Ticket

Action
as new .
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.