Opened 2 years ago

Last modified 2 years ago

#21758 new defect

problems about the TP-LINK WR703n with OPENWRT

Reported by: andycas Owned by: developers
Priority: normal Milestone:
Component: packages Version: Trunk
Keywords: Cc:


when the openwrt is installed in the wr703n, the Wr703n is connected to the pc, and I push the reset button when the power line is plugged into the usb port. the LED signal is flashing quickly.

After that I telnet the It seems to login the system. But with the prefix: "root@(none):/#" not the "root@OpenWrt:/#".

Now I type "passwd", it returns with "read only file system".

then I type the command:"mount_root",it returns with:

mount_root: jffs2 is not ready - marker found
mount_root: mount failed: Invalid argument.

Now I can use the command passwd to change the root's password.
But although it says:

Password for root changed by root

But the telnet is still connected.(Not the right way"the telnet is disconnected and the ssh can be connected").

So what's the problem with it? How can I solve it? Please help.

Attachments (0)

Change History (4)

comment:1 Changed 2 years ago by nbd

what openwrt version did you flash?

comment:2 Changed 2 years ago by anonymous

on the WR703N's back side of the box it printed:"ver:1.5"
but I don't know the original software version because I did not write down it before I flash the OpenWrt.

In the console of the OpenWrt it shows:
BusyBox v1.19.4 (2013-06-24 16:29:49 EST)
BARRIER BREAKER (Bleeding Edge, r37008)

comment:3 Changed 2 years ago by andycas

I check the bin file name is:"openwrt-ar71xx-generic-tl-wr703n-v1-squashfs-factory.bin"

comment:4 Changed 2 years ago by nbd

that version is very old, maybe you should flash something newer

Add Comment

Modify Ticket

as new .

E-mail address and user name can be saved in the Preferences.

Note: See TracTickets for help on using tickets.