Modify

Opened 2 years ago

Closed 23 months ago

Last modified 22 months ago

#21520 closed defect (invalid)

Tl-wdr6500v2 firmware bricked

Reported by: anonymous Owned by: developers
Priority: high Milestone: Designated Driver (Trunk)
Component: other Version: Trunk
Keywords: Cc:

Description

All firmware in trunk after 48014, all bricked

Attachments (0)

Change History (22)

comment:1 follow-up: Changed 2 years ago by nbd

custom builds or also snapshot builds? what configuration do you use?

comment:2 Changed 2 years ago by anonymous

The default config of snapshot builds is also bricked.I cannot use 5G wifi now as the new version has different kernel. I flash the new version form old one, the 2.4G wifi is OK, dmesg show that the bug has something to do with switch.

comment:3 in reply to: ↑ 1 Changed 2 years ago by anonymous

Replying to nbd:

custom builds or also snapshot builds? what configuration do you use?

both,default config. when boot up,all ports works like bridged or switch,including wan ports, no ssh,no failsafe

comment:4 follow-ups: Changed 2 years ago by nbd

please post the dmesg of the device

comment:5 in reply to: ↑ 4 Changed 2 years ago by anonymous

Replying to nbd:

please post the dmesg of the device

can not,ssh is not working,my serial adpater is broken...

comment:6 in reply to: ↑ 4 Changed 2 years ago by Shonn Lu

Replying to nbd:

please post the dmesg of the device

BusyBox v1.24.1 (2016-01-06 18:19:17 UTC) built-in shell (ash)

_

| |.-----.-----.-----.| | | |.----.| |_

| - |_
_ | -| | | _ _|
|_||| ||

|| W I R E L E S S F R E E D O M

-----------------------------------------------------
DESIGNATED DRIVER (Bleeding Edge, r48135)
-----------------------------------------------------

  • 2 oz. Orange Juice Combine all juices in a
  • 2 oz. Pineapple Juice tall glass filled with
  • 2 oz. Grapefruit Juice ice, stir well.
  • 2 oz. Cranberry Juice

-----------------------------------------------------

root@test:~# dmesg
[ 0.000000] Linux version 4.1.13 (openwrt@gb-10) (gcc version 5.2.0 (OpenWrt GCC 5.2.0 r48135) ) #1 Wed Jan 6 18:45:30 UTC 2016
[ 0.000000] MyLoader: sysp=77fdf3f5, boardp=bfddfffb, parts=56bfbfff
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
[ 0.000000] SoC: Qualcomm Atheros QCA956X ver 1 rev 0
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 08000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] free_area_init_node: node 0, pgdat 803e7fc0, node_mem_map 81000000
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32768 pages, LIFO batch:7
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: board=TL-WDR6500-v2 console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 125268K/131072K available (2984K kernel code, 142K rwdata, 600K rodata, 296K init, 201K bss, 5804K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:83
[ 0.000000] Clocks: CPU:750.000MHz, DDR:650.000MHz, AHB:250.000MHz, Ref:25.000MHz
[ 0.000000] clocksource MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5096694524 ns
[ 0.000007] sched_clock: 32 bits at 375MHz, resolution 2ns, wraps every 5726622718ns
[ 0.008009] Calibrating delay loop... 373.55 BogoMIPS (lpj=1867776)
[ 0.070751] pid_max: default: 32768 minimum: 301
[ 0.075602] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.082348] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.091811] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.102793] NET: Registered protocol family 16
[ 0.108403] MIPS: machine is TP-LINK TL-WDR6500 v2
[ 0.555882] registering PCI controller with io_map_base unset
[ 0.570136] PCI host bridge to bus 0000:00
[ 0.574327] pci_bus 0000:00: root bus resource [mem 0x12000000-0x13ffffff]
[ 0.581359] pci_bus 0000:00: root bus resource [io 0x0001]
[ 0.587101] pci_bus 0000:00: root bus resource 0x00000000 flags 0x0
[ 0.594083] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.602281] pci 0000:00:00.0: [168c:003c] type 00 class 0x028000
[ 0.602323] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.602375] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.602424] pci 0000:00:00.0: supports D1
[ 0.602436] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 0.602615] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.602642] pci 0000:00:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit]
[ 0.610111] pci 0000:00:00.0: BAR 6: assigned [mem 0x12200000-0x1220ffff pref]
[ 0.617563] pci 0000:00:00.0: using irq 40 for pin 1
[ 0.623307] Switched to clocksource MIPS
[ 0.628348] NET: Registered protocol family 2
[ 0.633580] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.640701] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.647271] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.653856] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.659806] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.666516] NET: Registered protocol family 1
[ 0.670988] PCI: CLS 0 bytes, default 32
[ 0.671815] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.692591] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.698577] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.710584] io scheduler noop registered
[ 0.714596] io scheduler deadline registered (default)
[ 0.720055] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.728786] console [ttyS0] disabled
[ 0.752471] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a 16550A
[ 0.761294] console [ttyS0] enabled
[ 0.768452] bootconsole [early0] disabled
[ 0.780704] m25p80 spi0.0: found w25q128, expected m25p80
[ 0.786340] m25p80 spi0.0: w25q128 (16384 Kbytes)
[ 0.792147] 5 tp-link-64k partitions found on MTD device spi0.0
[ 0.798300] Creating 5 MTD partitions on "spi0.0":
[ 0.803251] 0x000000000000-0x000000010000 : "u-boot"
[ 0.809069] 0x000000010000-0x0000001547bc : "kernel"
[ 0.814881] 0x0000001547bc-0x000000ff0000 : "rootfs"
[ 0.820620] mtd: device 2 (rootfs) set to be root filesystem
[ 0.826555] 1 squashfs-split partitions found on MTD device rootfs
[ 0.832936] 0x000000340000-0x000000ff0000 : "rootfs_data"
[ 0.839176] 0x000000ff0000-0x000001000000 : "art"
[ 0.844729] 0x000000010000-0x000000ff0000 : "firmware"
[ 0.880869] libphy: ag71xx_mdio: probed
[ 1.474975] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:04 [uid=00000000, driver=Generic PHY]
[ 1.484962] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[ 2.075094] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
[ 2.083094] NET: Registered protocol family 10
[ 2.090707] NET: Registered protocol family 17
[ 2.095416] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 2.108487] Bridge firewalling registered
[ 2.112737] 8021q: 802.1Q VLAN Support v1.8
[ 2.124037] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 2.132928] Freeing unused kernel memory: 296K (80406000 - 80450000)
[ 3.181865] init: Console is alive
[ 3.185611] init: - watchdog -
[ 4.062284] usbcore: registered new interface driver usbfs
[ 4.068086] usbcore: registered new interface driver hub
[ 4.073671] usbcore: registered new device driver usb
[ 4.083194] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.091163] ehci-platform: EHCI generic platform driver
[ 4.096695] ehci-platform ehci-platform.0: EHCI Host Controller
[ 4.102832] ehci-platform ehci-platform.0: new USB bus registered, assigned bus number 1
[ 4.113283] ehci-platform ehci-platform.0: irq 48, io mem 0x1b000000
[ 4.133337] ehci-platform ehci-platform.0: USB 2.0 started, EHCI 1.00
[ 4.140689] hub 1-0:1.0: USB hub found
[ 4.144873] hub 1-0:1.0: 1 port detected
[ 4.149219] ehci-platform ehci-platform.1: EHCI Host Controller
[ 4.155401] ehci-platform ehci-platform.1: new USB bus registered, assigned bus number 2
[ 4.165857] ehci-platform ehci-platform.1: irq 49, io mem 0x1b400000
[ 4.183327] ehci-platform ehci-platform.1: USB 2.0 started, EHCI 1.00
[ 4.190718] hub 2-0:1.0: USB hub found
[ 4.194906] hub 2-0:1.0: 1 port detected
[ 4.201403] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.208945] ohci-platform: OHCI generic platform driver
[ 5.190295] init: - preinit -
[ 5.690337] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.713173] random: procd urandom read with 8 bits of entropy available
[ 7.846708] jffs2_scan_eraseblock(): End of filesystem marker found at 0x10000
[ 7.854219] jffs2_build_filesystem(): unlocking the mtd device... done.
[ 7.861072] jffs2_build_filesystem(): erasing all blocks after the end marker... done.
[ 48.052792] jffs2: notice: (464) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 48.070012] mount_root: overlay filesystem has not been fully initialized yet
[ 48.085106] mount_root: switching to jffs2 overlay
[ 48.448339] procd: - early -
[ 48.451395] procd: - watchdog -
[ 49.122656] procd: - ubus -
[ 50.129167] procd: - init -
[ 50.755005] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 50.772128] Loading modules backported from Linux version master-2015-12-03-0-g1677f62
[ 50.780361] Backport generated by backports.git backports-20151120-0-g906a6b3
[ 50.790374] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 50.804248] nf_conntrack version 0.5.0 (1961 buckets, 7844 max)
[ 50.838606] xt_time: kernel timezone is -0000
[ 50.861885] cfg80211: World regulatory domain updated:
[ 50.867239] cfg80211: DFS Master region: unset
[ 50.871732] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 50.881798] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 50.890064] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 50.898331] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 50.906606] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 50.916400] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 50.926191] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 50.934550] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 50.942813] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 50.995264] PPP generic driver version 2.4.2
[ 51.001772] NET: Registered protocol family 24
[ 51.045570] ath: EEPROM regdomain: 0x0
[ 51.045587] ath: EEPROM indicates default country code should be used
[ 51.045594] ath: doing EEPROM country->regdmn map search
[ 51.045610] ath: country maps to regdmn code: 0x3a
[ 51.045619] ath: Country alpha2 being used: US
[ 51.045625] ath: Regpair used: 0x3a
[ 51.056058] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 51.058978] ieee80211 phy0: Atheros AR9561 Rev:0 mem=0xb8100000, irq=47
[ 51.083537] cfg80211: Regulatory domain changed to country: US
[ 51.089568] cfg80211: DFS Master region: FCC
[ 51.093912] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 51.103980] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[ 51.112240] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (N/A)
[ 51.122031] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
[ 51.131822] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2300 mBm), (0 s)
[ 51.140183] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[ 51.148449] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 57.025710] eth1: link up (1000Mbps/Full duplex)
[ 57.035137] device eth1.1 entered promiscuous mode
[ 57.040092] device eth1 entered promiscuous mode
[ 57.056612] br-lan: port 1(eth1.1) entered listening state
[ 57.062300] br-lan: port 1(eth1.1) entered listening state
[ 57.068143] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 57.126053] device eth0 entered promiscuous mode
[ 57.158052] IPv6: ADDRCONF(NETDEV_UP): br-wan: link is not ready
[ 57.246672] device eth1.2 entered promiscuous mode
[ 57.251716] br-wan: port 2(eth1.2) entered forwarding state
[ 57.257545] br-wan: port 2(eth1.2) entered forwarding state
[ 57.264221] IPv6: ADDRCONF(NETDEV_CHANGE): br-wan: link becomes ready
[ 58.572351] cfg80211: Regulatory domain changed to country: CN
[ 58.578422] cfg80211: DFS Master region: FCC
[ 58.582734] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 58.592807] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 58.601080] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (N/A)
[ 58.610872] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
[ 58.620668] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[ 58.628943] cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
[ 58.637569] cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm), (N/A)
[ 58.646200] cfg80211: (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
[ 59.053390] br-lan: port 1(eth1.1) entered learning state
[ 59.253346] br-wan: port 2(eth1.2) entered forwarding state
[ 60.150828] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 60.160199] device wlan0 entered promiscuous mode
[ 61.053342] br-lan: topology change detected, propagating
[ 61.058946] br-lan: port 1(eth1.1) entered forwarding state
[ 61.064783] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 68.992198] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 68.998934] br-lan: port 2(wlan0) entered listening state
[ 69.004557] br-lan: port 2(wlan0) entered listening state
[ 71.003330] br-lan: port 2(wlan0) entered learning state
[ 71.514292] random: nonblocking pool is initialized
[ 72.397009] device wlan0.sta4 entered promiscuous mode
[ 72.404250] br-lan: port 3(wlan0.sta4) entered listening state
[ 72.410322] br-lan: port 3(wlan0.sta4) entered listening state
[ 72.469191] device wlan0.sta5 entered promiscuous mode
[ 72.481138] br-lan: port 4(wlan0.sta5) entered listening state
[ 72.487251] br-lan: port 4(wlan0.sta5) entered listening state
[ 73.003316] br-lan: topology change detected, propagating
[ 73.008909] br-lan: port 2(wlan0) entered forwarding state
[ 74.291110] device wlan0.sta6 entered promiscuous mode
[ 74.305350] br-lan: port 5(wlan0.sta6) entered listening state
[ 74.311417] br-lan: port 5(wlan0.sta6) entered listening state
[ 74.403334] br-lan: port 3(wlan0.sta4) entered learning state
[ 74.483314] br-lan: port 4(wlan0.sta5) entered learning state
[ 76.303327] br-lan: port 5(wlan0.sta6) entered learning state
[ 76.403326] br-lan: topology change detected, sending tcn bpdu
[ 76.409369] br-lan: port 3(wlan0.sta4) entered forwarding state
[ 76.483324] br-lan: topology change detected, sending tcn bpdu
[ 76.489360] br-lan: port 4(wlan0.sta5) entered forwarding state
[ 78.303310] br-lan: topology change detected, sending tcn bpdu
[ 78.309350] br-lan: port 5(wlan0.sta6) entered forwarding state

/etc/init.d/network restart
Failed to connect to the switch. Use the "list" command to see which switches are available.

comment:7 Changed 2 years ago by anonymous

seem it's affected by changeset 47981&47982 the qca956x patch

comment:8 follow-up: Changed 2 years ago by anonymous

Reverted 47981 and 47982 patches. Now all works fine (r48624).

comment:9 in reply to: ↑ 8 ; follow-up: Changed 2 years ago by anonymous

Replying to anonymous:

Reverted 47981 and 47982 patches. Now all works fine (r48624).

The version of 05-Feb-2016 15:42 is still bricked.

comment:10 in reply to: ↑ 9 Changed 2 years ago by anonymous

Replying to anonymous:

Replying to anonymous:

Reverted 47981 and 47982 patches. Now all works fine (r48624).

The version of 05-Feb-2016 15:42 is still bricked.

Ok, I'll correct my answer. If you revert patches 47981 and 47982 it will works fine.

[ 0.000000] Linux version 4.1.16 (user@ubuntu) (gcc version 5.2.0 (OpenWrt GCC 5.2.0 r48624) ) #9 Sun Feb 7 12:18:49 UTC 2016
[ 0.000000] MyLoader: sysp=29ca0929, boardp=c57dd8d5, parts=8cadf5c3
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
[ 0.000000] SoC: Qualcomm Atheros QCA9561 ver 1 rev 0
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 08000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] free_area_init_node: node 0, pgdat 803b1f00, node_mem_map 81000000
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32768 pages, LIFO batch:7
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: board=TL-WDR6500-v2 console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 125532K/131072K available (2793K kernel code, 139K rwdata, 572K rodata, 260K init, 195K bss, 5540K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:83
[ 0.000000] Clocks: CPU:775.000MHz, DDR:650.000MHz, AHB:258.333MHz, Ref:25.000MHz
[ 0.000000] clocksource MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4932285024 ns
[ 0.000006] sched_clock: 32 bits at 387MHz, resolution 2ns, wraps every 5541893118ns
[ 0.007429] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
[ 0.069909] pid_max: default: 32768 minimum: 301
[ 0.074416] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.080684] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.089616] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.099432] NET: Registered protocol family 16
[ 0.104671] MIPS: machine is TP-LINK TL-WDR6500 v2
[ 0.551741] registering PCI controller with io_map_base unset
[ 0.564878] PCI host bridge to bus 0000:00
[ 0.568736] pci_bus 0000:00: root bus resource [mem 0x12000000-0x13ffffff]
[ 0.575339] pci_bus 0000:00: root bus resource [io 0x0001]
[ 0.580626] pci_bus 0000:00: root bus resource 0x00000000 flags 0x0
[ 0.587122] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.594722] pci 0000:00:00.0: [168c:003c] type 00 class 0x028000
[ 0.594763] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.594815] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.594865] pci 0000:00:00.0: supports D1
[ 0.594877] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 0.595054] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.595082] pci 0000:00:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit]
[ 0.602048] pci 0000:00:00.0: BAR 6: assigned [mem 0x12200000-0x1220ffff pref]
[ 0.608919] pci 0000:00:00.0: using irq 40 for pin 1
[ 0.614277] Switched to clocksource MIPS
[ 0.619025] NET: Registered protocol family 2
[ 0.623843] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.630477] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.636543] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.642666] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.648221] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.654450] NET: Registered protocol family 1
[ 0.658620] PCI: CLS 0 bytes, default 32
[ 0.659436] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.678726] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.684250] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.695548] io scheduler noop registered
[ 0.699239] io scheduler deadline registered (default)
[ 0.704377] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 0.710738] console [ttyS0] disabled
[ 0.734155] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a 16550A
[ 0.742354] console [ttyS0] enabled
[ 0.749512] bootconsole [early0] disabled
[ 0.759912] m25p80 spi0.0: found s25fl064k, expected m25p80
[ 0.765723] m25p80 spi0.0: s25fl064k (8192 Kbytes)
[ 0.771584] 5 tp-link-64k partitions found on MTD device spi0.0
[ 0.777736] Creating 5 MTD partitions on "spi0.0":
[ 0.782688] 0x000000000000-0x000000010000 : "u-boot"
[ 0.788512] 0x000000010000-0x0000001436a8 : "kernel"
[ 0.794261] 0x0000001436a8-0x0000007f0000 : "rootfs"
[ 0.800062] mtd: device 2 (rootfs) set to be root filesystem
[ 0.805981] 1 squashfs-split partitions found on MTD device rootfs
[ 0.812364] 0x000000680000-0x0000007f0000 : "rootfs_data"
[ 0.818579] 0x0000007f0000-0x000000800000 : "art"
[ 0.824061] 0x000000010000-0x0000007f0000 : "firmware"
[ 0.845057] libphy: ag71xx_mdio: probed
[ 1.436319] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd042, driver=Generic PHY]
[ 1.446286] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[ 2.036124] ag71xx-mdio.1: Found an AR934X built-in switch
[ 2.078260] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
[ 2.086392] NET: Registered protocol family 10
[ 2.094139] NET: Registered protocol family 17
[ 2.098849] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 2.111918] Bridge firewalling registered
[ 2.116201] 8021q: 802.1Q VLAN Support v1.8
[ 2.126999] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 2.135734] Freeing unused kernel memory: 260K (803cf000 - 80410000)
[ 2.978328] init: Console is alive
[ 2.982019] init: - watchdog -
[ 4.565165] usbcore: registered new interface driver usbfs
[ 4.570906] usbcore: registered new interface driver hub
[ 4.576512] usbcore: registered new device driver usb
[ 4.614724] SCSI subsystem initialized
[ 4.623611] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.631579] ehci-platform: EHCI generic platform driver
[ 4.637094] ehci-platform ehci-platform.0: EHCI Host Controller
[ 4.643227] ehci-platform ehci-platform.0: new USB bus registered, assigned bus number 1
[ 4.653681] ehci-platform ehci-platform.0: irq 48, io mem 0x1b000000
[ 4.674307] ehci-platform ehci-platform.0: USB 2.0 started, EHCI 1.00
[ 4.681633] hub 1-0:1.0: USB hub found
[ 4.685810] hub 1-0:1.0: 1 port detected
[ 4.690155] ehci-platform ehci-platform.1: EHCI Host Controller
[ 4.696334] ehci-platform ehci-platform.1: new USB bus registered, assigned bus number 2
[ 4.706792] ehci-platform ehci-platform.1: irq 49, io mem 0x1b400000
[ 4.724294] ehci-platform ehci-platform.1: USB 2.0 started, EHCI 1.00
[ 4.731615] hub 2-0:1.0: USB hub found
[ 4.735792] hub 2-0:1.0: 1 port detected
[ 4.742293] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.749804] ohci-platform: OHCI generic platform driver
[ 4.757257] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.767486] usbcore: registered new interface driver usb-storage
[ 5.051282] init: - preinit -
[ 5.868970] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.891158] random: procd urandom read with 9 bits of entropy available
[ 8.506473] eth0: link up (100Mbps/Full duplex)
[ 8.511175] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 9.088427] mount_root: loading kmods from internal overlay
[ 9.367651] jffs2: notice: (391) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 9.384032] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[ 9.395984] block: extroot: not configured
[ 9.441567] jffs2: notice: (388) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 9.458792] mount_root: loading kmods from internal overlay
[ 9.639229] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[ 9.649453] block: extroot: not configured
[ 9.654540] mount_root: switching to jffs2 overlay
[ 9.681960] eth0: link down
[ 9.693498] procd: - early -
[ 9.697081] procd: - watchdog -
[ 10.372384] procd: - ubus -
[ 11.431753] procd: - init -
[ 12.230729] tun: Universal TUN/TAP device driver, 1.6
[ 12.235996] tun: (C) 1999-2004 Max Krasnyansky <maxk@…>
[ 12.258053] l2tp_core: L2TP core driver, V2.0
[ 12.271908] l2tp_netlink: L2TP netlink interface
[ 12.282651] sit: IPv6 over IPv4 tunneling driver
[ 12.303610] gre: GRE over IPv4 demultiplexor driver
[ 12.322658] ip_gre: GRE over IPv4 tunneling driver
[ 12.336855] ip6_gre: GRE over IPv6 tunneling driver
[ 12.356082] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 12.385612] Netfilter messages via NETLINK v0.30.
[ 12.396408] ip_set: protocol 6
[ 12.465863] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68
[ 12.473502] Backport generated by backports.git backports-20151218-0-g2f58d9d
[ 12.633239] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 12.639663] ath10k_pci 0000:00:00.0: pci irq legacy interrupts 0 irq_mode 0 reset_mode 0
[ 12.978450] ath10k_pci 0000:00:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043222ff sub 0000:0000
[ 12.988017] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
[ 13.001010] ath10k_pci 0000:00:00.0: firmware ver 10.2.4.97 api 5 features no-p2p crc32 f91e34f2
[ 13.050267] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
[ 13.061060] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 13.134795] firmware ath10k!QCA988X!hw2.0!board-2.bin: firmware_loading_store: map pages failed
[ 13.148250] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[ 14.204044] ath10k_pci 0000:00:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1
[ 14.307288] ath: EEPROM regdomain: 0x0
[ 14.307303] ath: EEPROM indicates default country code should be used
[ 14.307310] ath: doing EEPROM country->regdmn map search
[ 14.307326] ath: country maps to regdmn code: 0x3a
[ 14.307334] ath: Country alpha2 being used: US
[ 14.307340] ath: Regpair used: 0x3a
[ 14.340793] arp_tables: (C) 2002 David S. Miller
[ 14.415800] Ebtables v2.0 registered
[ 14.435958] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.456822] nf_conntrack version 0.5.0 (1965 buckets, 7860 max)
[ 14.487975] usbcore: registered new interface driver usbserial
[ 14.494074] usbcore: registered new interface driver usbserial_generic
[ 14.500956] usbserial: USB Serial support registered for generic
[ 14.525944] xt_time: kernel timezone is -0000
[ 14.536829] usbcore: registered new interface driver cdc_ether
[ 14.546217] usbcore: registered new interface driver cdc_ncm
[ 14.557868] usbcore: registered new interface driver ftdi_sio
[ 14.563875] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 14.583029] PPP generic driver version 2.4.2
[ 14.589502] PPP MPPE Compression module registered
[ 14.596028] NET: Registered protocol family 24
[ 14.602164] PPTP driver version 0.8.5
[ 14.609036] usbcore: registered new interface driver rndis_host
[ 14.635614] ath: EEPROM regdomain: 0x0
[ 14.635630] ath: EEPROM indicates default country code should be used
[ 14.635637] ath: doing EEPROM country->regdmn map search
[ 14.635653] ath: country maps to regdmn code: 0x3a
[ 14.635661] ath: Country alpha2 being used: US
[ 14.635668] ath: Regpair used: 0x3a
[ 14.646095] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 14.649005] ieee80211 phy1: Atheros AR9561 Rev:0 mem=0xb8100000, irq=47
[ 14.707263] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 14.719186] usbcore: registered new interface driver option
[ 14.725073] usbserial: USB Serial support registered for GSM modem (1-port)
[ 23.193151] device eth1 entered promiscuous mode
[ 23.224965] br-lan: port 1(eth1) entered forwarding state
[ 23.230571] br-lan: port 1(eth1) entered forwarding state
[ 23.291158] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 24.154325] br-lan: port 1(eth1) entered disabled state
[ 25.193235] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 25.287850] device wlan1 entered promiscuous mode
[ 25.292771] br-lan: port 2(wlan1) entered forwarding state
[ 25.298527] br-lan: port 2(wlan1) entered forwarding state
[ 25.328004] br-lan: port 2(wlan1) entered disabled state
[ 25.566493] eth0: link up (100Mbps/Full duplex)
[ 27.321668] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 27.336213] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 27.378042] device wlan0 entered promiscuous mode
[ 28.819961] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 28.826669] br-lan: port 3(wlan0) entered forwarding state
[ 28.832374] br-lan: port 3(wlan0) entered forwarding state
[ 30.348670] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 30.355490] br-lan: port 2(wlan1) entered forwarding state
[ 30.361192] br-lan: port 2(wlan1) entered forwarding state
[ 30.824303] br-lan: port 3(wlan0) entered forwarding state
[ 32.354312] br-lan: port 2(wlan1) entered forwarding state
[ 44.904319] random: nonblocking pool is initialized

But yes, repository still broken.

comment:11 follow-up: Changed 2 years ago by nbd

please update to r48652 or newer, clean your kernel tree and try again.

comment:12 in reply to: ↑ 11 Changed 2 years ago by anonymous

Replying to nbd:

please update to r48652 or newer, clean your kernel tree and try again.

Still not working.

[    0.000000] Linux version 4.1.16 (user@ubuntu) (gcc version 5.2.0 (OpenWrt GCC 5.2.0 r48686) ) #2 Tue Feb 9 21:55:57 UTC 2016
[    0.000000] MyLoader: sysp=29ca0929, boardp=c57dd8d5, parts=8cadf5c3
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
[    0.000000] SoC: Qualcomm Atheros QCA956X ver 1 rev 0
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 08000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] On node 0 totalpages: 32768
[    0.000000] free_area_init_node: node 0, pgdat 803cdf00, node_mem_map 81000000
[    0.000000]   Normal zone: 256 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32768 pages, LIFO batch:7
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line:  board=TL-WDR6500-v2  console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 125404K/131072K available (2793K kernel code, 139K rwdata, 684K rodata, 276K init, 195K bss, 5668K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:83
[    0.000000] Clocks: CPU:775.000MHz, DDR:650.000MHz, AHB:258.333MHz, Ref:25.000MHz
[    0.000000] clocksource MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4932285024 ns
[    0.000006] sched_clock: 32 bits at 387MHz, resolution 2ns, wraps every 5541893118ns
[    0.007428] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
[    0.069910] pid_max: default: 32768 minimum: 301
[    0.074414] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.080674] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.089632] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.099439] NET: Registered protocol family 16
[    0.104675] MIPS: machine is TP-LINK TL-WDR6500 v2
[    0.551746] registering PCI controller with io_map_base unset
[    0.564893] PCI host bridge to bus 0000:00
[    0.568752] pci_bus 0000:00: root bus resource [mem 0x12000000-0x13ffffff]
[    0.575354] pci_bus 0000:00: root bus resource [io  0x0001]
[    0.580642] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    0.587138] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.594740] pci 0000:00:00.0: [168c:003c] type 00 class 0x028000
[    0.594780] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[    0.594831] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.594880] pci 0000:00:00.0: supports D1
[    0.594892] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    0.595071] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    0.595099] pci 0000:00:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit]
[    0.602064] pci 0000:00:00.0: BAR 6: assigned [mem 0x12200000-0x1220ffff pref]
[    0.608935] pci 0000:00:00.0: using irq 40 for pin 1
[    0.614299] Switched to clocksource MIPS
[    0.619042] NET: Registered protocol family 2
[    0.623857] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.630494] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.636558] TCP: Hash tables configured (established 1024 bind 1024)
[    0.642682] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.648237] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.654466] NET: Registered protocol family 1
[    0.658647] PCI: CLS 0 bytes, default 32
[    0.659462] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.678891] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.684457] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.695673] io scheduler noop registered
[    0.699363] io scheduler deadline registered (default)
[    0.704497] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.710847] console [ttyS0] disabled
[    0.734266] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a 16550A
[    0.742464] console [ttyS0] enabled
[    0.749619] bootconsole [early0] disabled
[    0.760068] m25p80 spi0.0: found s25fl064k, expected m25p80
[    0.765883] m25p80 spi0.0: s25fl064k (8192 Kbytes)
[    0.771764] 5 tp-link-64k partitions found on MTD device spi0.0
[    0.777917] Creating 5 MTD partitions on "spi0.0":
[    0.782867] 0x000000000000-0x000000010000 : "u-boot"
[    0.788690] 0x000000010000-0x000000141250 : "kernel"
[    0.794486] 0x000000141250-0x0000007f0000 : "rootfs"
[    0.800237] mtd: device 2 (rootfs) set to be root filesystem
[    0.806160] 1 squashfs-split partitions found on MTD device rootfs
[    0.812544] 0x000000680000-0x0000007f0000 : "rootfs_data"
[    0.818750] 0x0000007f0000-0x000000800000 : "art"
[    0.824226] 0x000000010000-0x0000007f0000 : "firmware"
[    0.845414] libphy: ag71xx_mdio: probed
[    1.436345] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd042, driver=Generic PHY]
[    1.446323] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[    2.035882] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
[    2.043982] NET: Registered protocol family 10
[    2.051836] NET: Registered protocol family 17
[    2.056538] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    2.069608] Bridge firewalling registered
[    2.073868] 8021q: 802.1Q VLAN Support v1.8
[    2.084713] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    2.093492] Freeing unused kernel memory: 276K (803eb000 - 80430000)
[    2.936328] init: Console is alive
[    2.940017] init: - watchdog -
[    4.535895] usbcore: registered new interface driver usbfs
[    4.541636] usbcore: registered new interface driver hub
[    4.547250] usbcore: registered new device driver usb
[    4.584747] SCSI subsystem initialized
[    4.593644] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.601624] ehci-platform: EHCI generic platform driver
[    4.607142] ehci-platform ehci-platform.0: EHCI Host Controller
[    4.613273] ehci-platform ehci-platform.0: new USB bus registered, assigned bus number 1
[    4.623726] ehci-platform ehci-platform.0: irq 48, io mem 0x1b000000
[    4.644331] ehci-platform ehci-platform.0: USB 2.0 started, EHCI 1.00
[    4.651648] hub 1-0:1.0: USB hub found
[    4.655835] hub 1-0:1.0: 1 port detected
[    4.660184] ehci-platform ehci-platform.1: EHCI Host Controller
[    4.666369] ehci-platform ehci-platform.1: new USB bus registered, assigned bus number 2
[    4.676831] ehci-platform ehci-platform.1: irq 49, io mem 0x1b400000
[    4.694318] ehci-platform ehci-platform.1: USB 2.0 started, EHCI 1.00
[    4.701643] hub 2-0:1.0: USB hub found
[    4.705821] hub 2-0:1.0: 1 port detected
[    4.712329] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.719846] ohci-platform: OHCI generic platform driver
[    4.727303] uhci_hcd: USB Universal Host Controller Interface driver
[    4.737556] usbcore: registered new interface driver usb-storage
[    4.948885] init: - preinit -
[    5.598136] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.620578] random: procd urandom read with 8 bits of entropy available
[    7.615380] eth0: link up (1000Mbps/Full duplex)
[    7.620177] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    8.819098] mount_root: loading kmods from internal overlay
[    9.067671] block: attempting to load /etc/config/fstab
[    9.073232] block: unable to load configuration (fstab: Entry not found)
[    9.080326] block: no usable configuration
[    9.085118] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
[    9.112670] eth0: link down
[    9.124173] procd: - early -
[    9.127734] procd: - watchdog -
[    9.845366] procd: - ubus -
[   10.850912] procd: - init -
[   11.664539] tun: Universal TUN/TAP device driver, 1.6
[   11.669762] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   11.698097] l2tp_core: L2TP core driver, V2.0
[   11.704025] l2tp_netlink: L2TP netlink interface
[   11.715828] sit: IPv6 over IPv4 tunneling driver
[   11.738995] gre: GRE over IPv4 demultiplexor driver
[   11.757738] ip_gre: GRE over IPv4 tunneling driver
[   11.773646] ip6_gre: GRE over IPv6 tunneling driver
[   11.789780] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   11.819628] Netfilter messages via NETLINK v0.30.
[   11.830564] ip_set: protocol 6
[   11.905782] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68
[   11.913421] Backport generated by backports.git backports-20151218-0-g2f58d9d
[   12.067772] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[   12.074156] ath10k_pci 0000:00:00.0: pci irq legacy interrupts 0 irq_mode 0 reset_mode 0
[   12.287652] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/cal-pci-0000:00:00.0.bin failed with error -2
[   12.298372] ath10k_pci 0000:00:00.0: Falling back to user helper
[   12.577673] ath10k_pci 0000:00:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043222ff sub 0000:0000
[   12.587249] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
[   12.600285] ath10k_pci 0000:00:00.0: firmware ver 10.2.4.97 api 5 features no-p2p crc32 f91e34f2
[   12.649554] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
[   12.660348] ath10k_pci 0000:00:00.0: Falling back to user helper
[   12.733872] firmware ath10k!QCA988X!hw2.0!board-2.bin: firmware_loading_store: map pages failed
[   12.747416] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[   13.803209] ath10k_pci 0000:00:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1
[   13.907307] ath: EEPROM regdomain: 0x0
[   13.907322] ath: EEPROM indicates default country code should be used
[   13.907329] ath: doing EEPROM country->regdmn map search
[   13.907344] ath: country maps to regdmn code: 0x3a
[   13.907353] ath: Country alpha2 being used: US
[   13.907359] ath: Regpair used: 0x3a
[   13.941009] arp_tables: (C) 2002 David S. Miller
[   14.015814] Ebtables v2.0 registered
[   14.034792] ip_tables: (C) 2000-2006 Netfilter Core Team
[   14.055976] nf_conntrack version 0.5.0 (1963 buckets, 7852 max)
[   14.087423] usbcore: registered new interface driver usbserial
[   14.093530] usbcore: registered new interface driver usbserial_generic
[   14.100410] usbserial: USB Serial support registered for generic
[   14.125564] xt_time: kernel timezone is -0000
[   14.136526] usbcore: registered new interface driver cdc_ether
[   14.145956] usbcore: registered new interface driver cdc_ncm
[   14.157608] usbcore: registered new interface driver ftdi_sio
[   14.163625] usbserial: USB Serial support registered for FTDI USB Serial Device
[   14.182666] PPP generic driver version 2.4.2
[   14.189171] PPP MPPE Compression module registered
[   14.195697] NET: Registered protocol family 24
[   14.201852] PPTP driver version 0.8.5
[   14.208729] usbcore: registered new interface driver rndis_host
[   14.235239] ath: EEPROM regdomain: 0x0
[   14.235255] ath: EEPROM indicates default country code should be used
[   14.235262] ath: doing EEPROM country->regdmn map search
[   14.235278] ath: country maps to regdmn code: 0x3a
[   14.235286] ath: Country alpha2 being used: US
[   14.235293] ath: Regpair used: 0x3a
[   14.245704] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[   14.248601] ieee80211 phy1: Atheros AR9561 Rev:0 mem=0xb8100000, irq=47
[   14.307424] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[   14.322555] usbcore: registered new interface driver option
[   14.328445] usbserial: USB Serial support registered for GSM modem (1-port)
[   21.629509] eth1: link up (1000Mbps/Full duplex)
[   21.645914] device eth1 entered promiscuous mode
[   21.651513] br-lan: port 1(eth1) entered forwarding state
[   21.657164] br-lan: port 1(eth1) entered forwarding state
[   21.771811] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   22.775381] eth0: link up (1000Mbps/Full duplex)
[   22.780347] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   23.654307] br-lan: port 1(eth1) entered forwarding state
[   73.864324] random: nonblocking pool is initialized
[   74.845915] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[   74.864367] jffs2_build_filesystem(): unlocking the mtd device... done.
[   74.871234] jffs2_build_filesystem(): erasing all blocks after the end marker... done.
[   80.085069] jffs2: notice: (1574) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.

swconfig list shows nothing

After reverting r47981, r47982, r48650, r48651 and r48652 works fine.


comment:13 Changed 2 years ago by anonymous

SO, WHY NOT REVERT ALL CHANGESETS TO BUILDROOT BY DEFAULT? MAKE IT WIRKING AGAIN.

comment:14 follow-up: Changed 2 years ago by nbd

should be fixed in r48937, please test.

comment:15 in reply to: ↑ 14 Changed 2 years ago by anonymous

Replying to nbd:

should be fixed in r48937, please test.

works,confirmed!

comment:16 Changed 2 years ago by nbd

  • Resolution set to fixed
  • Status changed from new to closed

comment:17 Changed 2 years ago by anonymous

how can i install openwrt every time i try give me Error code: 18005 please help

comment:18 follow-up: Changed 23 months ago by anonymous

  • Resolution fixed deleted
  • Status changed from closed to reopened

crash when wan port is connected, still buggy

comment:19 Changed 23 months ago by jow

  • Resolution set to invalid
  • Status changed from reopened to closed

This ticket is about bricking the unit, not buggy wan ports. Open a separate issue and provide details for it.

comment:20 in reply to: ↑ 18 Changed 23 months ago by hackpascal

Replying to anonymous:

crash when wan port is connected, still buggy

It seems that I have used a wrong function to set the speed of ge0.
I'll check and fix it.

comment:21 Changed 23 months ago by anonymous

would any ony show me hw to install openwrt on tl-wdr6500 coz ig giveing me error code 18005

comment:22 Changed 22 months ago by jeffrey

Just tested, for r49112, still crash when WAN port is connected.

Add Comment

Modify Ticket

Action
as closed .
The resolution will be deleted. Next status will be 'reopened'.
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.