Modify

Opened 2 years ago

Last modified 2 years ago

#21454 new defect

Seagate USB HDD do not mount on Chaos Calmer

Reported by: laure.f.o@… Owned by: developers
Priority: normal Milestone:
Component: base system Version: Chaos Calmer 15.05
Keywords: usb seagate mount Cc:

Description (last modified by rmilecki)

I just upgrade my TP-Link TL-WDR4300 v1 to Chaos Calmer. Since that the USB HDD seagate I have is not mounting.

# lsusb
Bus 001 Device 004: ID 0bc2:a0a1 Seagate RSS LLC 
Bus 001 Device 003: ID abcd:1234 Unknown 
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
# lsusb -v
Bus 001 Device 004: ID 0bc2:a0a1 Seagate RSS LLC 
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.10
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x0bc2 Seagate RSS LLC
  idProduct          0xa0a1 
  bcdDevice            1.00
  iManufacturer           2 Seagate
  iProduct                3 Backup+ Desk
  iSerial                 1 NA5JZ3BK
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xc0
      Self Powered
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk-Only
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
Binary Object Store Descriptor:
  bLength                 5
  bDescriptorType        15
  wTotalLength           22
  bNumDeviceCaps          2
  USB 2.0 Extension Device Capability:
    bLength                 7
    bDescriptorType        16
    bDevCapabilityType      2
    bmAttributes   0x00000002
      Link Power Management (LPM) Supported
  SuperSpeed USB Device Capability:
    bLength                10
    bDescriptorType        16
    bDevCapabilityType      3
    bmAttributes         0x00
    wSpeedsSupported   0x000e
      Device can operate at Full Speed (12Mbps)
      Device can operate at High Speed (480Mbps)
      Device can operate at SuperSpeed (5Gbps)
    bFunctionalitySupport   1
      Lowest fully-functional device speed is Full Speed (12Mbps)
    bU1DevExitLat          10 micro seconds
    bU2DevExitLat        2047 micro seconds
Device Status:     0x0001
  Self Powered

Bus 001 Device 003: ID abcd:1234 Unknown 
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0xabcd Unknown
  idProduct          0x1234 
  bcdDevice            1.00
  iManufacturer           1 General 
  iProduct                2 UDisk           
  iSerial                 3 1312280341579388903109
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk-Only
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0000
  (Bus Powered)

Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         1 Single TT
  bMaxPacketSize0        64
  idVendor           0x05e3 Genesys Logic, Inc.
  idProduct          0x0608 USB-2.0 4-Port HUB
  bcdDevice           77.64
  iManufacturer           0 
  iProduct                1 USB2.0 Hub
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0001  1x 1 bytes
        bInterval              12
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             4
  wHubCharacteristic 0x00e9
    Per-port power switching
    Per-port overcurrent protection
    TT think time 32 FS bits
    Port indicators
  bPwrOn2PwrGood       50 * 2 milli seconds
  bHubContrCurrent    100 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0503 highspeed power enable connect
   Port 2: 0000.0503 highspeed power enable connect
   Port 3: 0000.0100 power
   Port 4: 0000.0100 power
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0001
  Self Powered

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         1 Single TT
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0002 2.0 root hub
  bcdDevice            3.18
  iManufacturer           3 Linux 3.18.20 ehci_hcd
  iProduct                2 EHCI Host Controller
  iSerial                 1 ehci-platform
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             1
  wHubCharacteristic 0x0009
    Per-port power switching
    Per-port overcurrent protection
    TT think time 8 FS bits
  bPwrOn2PwrGood       10 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0503 highspeed power enable connect
Device Status:     0x0001
  Self Powered

However the /dev/sdbx is not present.

# ls /dev/s
sda   sda1  sg0   shm/

Any ideas?

Attachments (0)

Change History (5)

comment:1 Changed 2 years ago by anonymous

Why sdb and not sda? Please provide at least a dmesg log after the hdd is been attached.

comment:2 Changed 2 years ago by anonymous

sdb because sda is for the usb overlay and is working.

root@lima-openwrt:~# dmesg 
[    0.000000] Linux version 3.18.20 (buildbot@builder1) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r46450) ) #1 Fri Sep 4 21:55:57 CEST 2015
[    0.000000] MyLoader: sysp=84c31530, boardp=0065cbe4, parts=195ef6a4
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 0001974c (MIPS 74Kc)
[    0.000000] SoC: Atheros AR9344 rev 2
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 08000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x07ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x07ffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x07ffffff]
[    0.000000] On node 0 totalpages: 32768
[    0.000000] free_area_init_node: node 0, pgdat 8034e2b0, node_mem_map 81000000
[    0.000000]   Normal zone: 256 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32768 pages, LIFO batch:7
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line:  board=TL-WDR4300  console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 125980K/131072K available (2621K kernel code, 129K rwdata, 344K rodata, 224K init, 194K bss, 5092K reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.000000] Clocks: CPU:560.000MHz, DDR:450.000MHz, AHB:225.000MHz, Ref:40.000MHz
[    0.000000] Calibrating delay loop... 278.93 BogoMIPS (lpj=1394688)
[    0.070000] pid_max: default: 32768 minimum: 301
[    0.070000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.080000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.080000] NET: Registered protocol family 16
[    0.090000] MIPS: machine is TP-LINK TL-WDR3600/4300/4310
[    0.090000] registering PCI controller with io_map_base unset
[    0.330000] PCI host bridge to bus 0000:00
[    0.330000] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
[    0.340000] pci_bus 0000:00: root bus resource [io  0x0000]
[    0.340000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.350000] pci 0000:00:00.0: [168c:0033] type 00 class 0x028000
[    0.350000] pci 0000:00:00.0: invalid calibration data
[    0.350000] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff 64bit]
[    0.350000] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.350000] pci 0000:00:00.0: supports D1
[    0.350000] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    0.350000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    0.350000] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1001ffff 64bit]
[    0.360000] pci 0000:00:00.0: BAR 6: assigned [mem 0x10020000-0x1002ffff pref]
[    0.360000] pci 0000:00:00.0: using irq 40 for pin 1
[    0.370000] Switched to clocksource MIPS
[    0.370000] NET: Registered protocol family 2
[    0.380000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.380000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.390000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.390000] TCP: reno registered
[    0.400000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.400000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.410000] NET: Registered protocol family 1
[    0.410000] PCI: CLS 0 bytes, default 32
[    0.410000] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.440000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.440000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.450000] msgmni has been set to 246
[    0.460000] io scheduler noop registered
[    0.460000] io scheduler deadline registered (default)
[    0.470000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.470000] console [ttyS0] disabled
[    0.500000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 2500000) is a 16550A
[    0.510000] console [ttyS0] enabled
[    0.510000] bootconsole [early0] disabled
[    0.530000] m25p80 spi0.0: found en25q64, expected m25p80
[    0.530000] m25p80 spi0.0: en25q64 (8192 Kbytes)
[    0.540000] 5 tp-link partitions found on MTD device spi0.0
[    0.540000] Creating 5 MTD partitions on "spi0.0":
[    0.550000] 0x000000000000-0x000000020000 : "u-boot"
[    0.550000] 0x000000020000-0x00000012c5a4 : "kernel"
[    0.560000] 0x00000012c5a4-0x0000007f0000 : "rootfs"
[    0.570000] mtd: device 2 (rootfs) set to be root filesystem
[    0.570000] 1 squashfs-split partitions found on MTD device rootfs
[    0.580000] 0x000000360000-0x0000007f0000 : "rootfs_data"
[    0.580000] 0x0000007f0000-0x000000800000 : "art"
[    0.590000] 0x000000020000-0x0000007f0000 : "firmware"
[    0.610000] switch0: Atheros AR8327 rev. 2 switch registered on ag71xx-mdio.0
[    0.670000] libphy: ag71xx_mdio: probed
[    1.270000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd033, driver=Atheros AR8216/AR8236/AR8316]
[    1.280000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
[    1.290000] TCP: cubic registered
[    1.290000] NET: Registered protocol family 17
[    1.290000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    1.310000] Bridge firewalling registered
[    1.310000] 8021q: 802.1Q VLAN Support v1.8
[    1.320000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    1.330000] Freeing unused kernel memory: 224K (80368000 - 803a0000)
[    2.320000] init: Console is alive
[    2.330000] init: - watchdog -
[    3.540000] usbcore: registered new interface driver usbfs
[    3.540000] usbcore: registered new interface driver hub
[    3.550000] usbcore: registered new device driver usb
[    3.560000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.570000] ehci-platform: EHCI generic platform driver
[    3.570000] ehci-platform ehci-platform: EHCI Host Controller
[    3.580000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[    3.590000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[    3.610000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[    3.610000] hub 1-0:1.0: USB hub found
[    3.620000] hub 1-0:1.0: 1 port detected
[    3.940000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    4.090000] hub 1-1:1.0: USB hub found
[    4.090000] hub 1-1:1.0: 4 ports detected
[    4.380000] usb 1-1.1: new high-speed USB device number 3 using ehci-platform
[    4.380000] init: - preinit -
[    4.990000] random: procd urandom read with 9 bits of entropy available
[    6.390000] eth0: link up (1000Mbps/Full duplex)
[    8.320000] jffs2: notice: (394) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    8.350000] mount_root: loading kmods from internal overlay
[    8.390000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 3 is up
[    9.000000] SCSI subsystem initialized
[    9.010000] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[    9.020000] scsi host0: usb-storage 1-1.1:1.0
[    9.030000] usbcore: registered new interface driver usb-storage
[    9.250000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[    9.260000] block: extroot: device not present, retrying in 5 seconds
[   10.030000] scsi 0:0:0:0: Direct-Access     General  UDisk            5.00 PQ: 0 ANSI: 2
[   10.040000] sd 0:0:0:0: [sda] 16076800 512-byte logical blocks: (8.23 GB/7.66 GiB)
[   10.040000] sd 0:0:0:0: [sda] Write Protect is off
[   10.050000] sd 0:0:0:0: [sda] Mode Sense: 0b 00 00 08
[   10.050000] sd 0:0:0:0: [sda] No Caching mode page found
[   10.060000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[   10.070000]  sda: sda1
[   10.070000] sd 0:0:0:0: [sda] Attached SCSI removable disk
[   10.390000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 2 is up
[   12.030000] usb 1-1.2: new high-speed USB device number 4 using ehci-platform
[   12.210000] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[   12.210000] scsi host1: usb-storage 1-1.2:1.0
[   17.550000] EXT4-fs (sda1): recovery complete
[   17.560000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: 
[   17.580000] mount_root: switched to extroot
[   17.620000] eth0: link down
[   17.630000] procd: - early -
[   17.640000] procd: - watchdog -
[   18.360000] procd: - ubus -
[   19.370000] procd: - init -
[   20.260000] NET: Registered protocol family 10
[   20.280000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   20.290000] ehci-pci: EHCI PCI platform driver
[   20.300000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   20.310000] ohci-platform: OHCI generic platform driver
[   20.320000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   20.330000] Loading modules backported from Linux version master-2015-03-09-0-g141f155
[   20.340000] Backport generated by backports.git backports-20150129-0-gdd4a670
[   20.350000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   20.360000] nf_conntrack version 0.5.0 (1971 buckets, 7884 max)
[   20.390000] usbcore: registered new interface driver ums-alauda
[   20.400000] usbcore: registered new interface driver ums-cypress
[   20.400000] usbcore: registered new interface driver ums-datafab
[   20.410000] usbcore: registered new interface driver ums-freecom
[   20.420000] usbcore: registered new interface driver ums-isd200
[   20.430000] usbcore: registered new interface driver ums-jumpshot
[   20.440000] usbcore: registered new interface driver ums-karma
[   20.440000] usbcore: registered new interface driver ums-sddr09
[   20.450000] usbcore: registered new interface driver ums-sddr55
[   20.460000] usbcore: registered new interface driver ums-usbat
[   20.480000] xt_time: kernel timezone is -0000
[   20.510000] cfg80211: Calling CRDA to update world regulatory domain
[   20.540000] cfg80211: World regulatory domain updated:
[   20.540000] cfg80211:  DFS Master region: unset
[   20.550000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   20.560000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   20.560000] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   20.570000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   20.580000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   20.590000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   20.600000] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   20.610000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   20.610000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   20.670000] PPP generic driver version 2.4.2
[   20.680000] NET: Registered protocol family 24
[   20.730000] ath: EEPROM regdomain: 0x0
[   20.730000] ath: EEPROM indicates default country code should be used
[   20.730000] ath: doing EEPROM country->regdmn map search
[   20.730000] ath: country maps to regdmn code: 0x3a
[   20.730000] ath: Country alpha2 being used: US
[   20.730000] ath: Regpair used: 0x3a
[   20.750000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   20.750000] ieee80211 phy0: Atheros AR9340 Rev:2 mem=0xb8100000, irq=47
[   20.760000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[   20.770000] ath: EEPROM regdomain: 0x0
[   20.770000] ath: EEPROM indicates default country code should be used
[   20.770000] ath: doing EEPROM country->regdmn map search
[   20.770000] ath: country maps to regdmn code: 0x3a
[   20.770000] ath: Country alpha2 being used: US
[   20.770000] ath: Regpair used: 0x3a
[   20.780000] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[   20.780000] ieee80211 phy1: Atheros AR9300 Rev:4 mem=0xb0000000, irq=40
[   20.800000] cfg80211: Calling CRDA for country: US
[   20.810000] cfg80211: Regulatory domain changed to country: US
[   20.810000] cfg80211:  DFS Master region: FCC
[   20.820000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   20.830000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[   20.840000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
[   20.850000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
[   20.860000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[   20.860000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[   22.290000] random: nonblocking pool is initialized
[   29.400000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   29.420000] device eth0.1 entered promiscuous mode
[   29.420000] device eth0 entered promiscuous mode
[   29.440000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   29.470000] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
[   30.650000] eth0: link up (1000Mbps/Full duplex)
[   30.650000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   30.680000] br-lan: port 1(eth0.1) entered forwarding state
[   30.680000] br-lan: port 1(eth0.1) entered forwarding state
[   30.690000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
[   30.690000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   32.680000] br-lan: port 1(eth0.1) entered forwarding state
[   34.170000] usb 1-1.2: reset high-speed USB device number 4 using ehci-platform
Last edited 2 years ago by rmilecki (previous) (diff)

comment:3 Changed 2 years ago by anonymous

Continue...

deattach and attach

dmesg
...
[ 32.680000] br-lan: port 1(eth0.1) entered forwarding state
[ 34.170000] usb 1-1.2: reset high-speed USB device number 4 using ehci-platform
[ 3102.230000] usb 1-1.2: USB disconnect, device number 4
[ 3115.010000] usb 1-1.2: new high-speed USB device number 5 using ehci-platform
[ 3115.190000] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[ 3115.210000] scsi host2: usb-storage 1-1.2:1.0
[ 3137.130000] usb 1-1.2: reset high-speed USB device number 5 using ehci-platform

comment:4 Changed 2 years ago by rmilecki

  • Description modified (diff)

comment:5 Changed 2 years ago by laurefo

I do not know why, but after installing again serveral times is working.

Add Comment

Modify Ticket

Action
as new .
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.