Modify

Opened 2 years ago

Last modified 2 years ago

#20594 new defect

Alix 2c1 won't boot with Chaos Calmer 15.05

Reported by: anonymous Owned by: developers
Priority: normal Milestone: Chaos Calmer 15.05
Component: base system Version: Trunk
Keywords: Alix Cc:

Description

I have PC Engines Alix 2c1.
I downloaded image and wrote to CF with Rawrite32.
And Alix 2c1 won't boot anyway.
With Barrier Breaker 14.07 this procedure works fine and Alix 2c1 boot perfect.

Attachments (0)

Change History (7)

comment:1 Changed 2 years ago by nbd

please post a boot log

comment:2 Changed 2 years ago by anonymous

Hm, Alix 2c1 won't boot. How do I get boot log???

comment:3 Changed 2 years ago by nbd

serial port

comment:4 Changed 2 years ago by anonymous

PC Engines ALIX.2 v0.99h
640 KB Base Memory
130048 KB Extended Memory

01F0 Master 848A SanDisk SDCFH-256
Phys C/H/S 980/16/32 Log C/H/S 980/16/32
GRUB loading....

GNU GRUB version 2.02~beta2

+----------------------------------------------------------------------------+
|*OpenWrt |
| OpenWrt (failsafe) |
| |
| |
| |
| |
| |
| |
| |
| |
| |
+----------------------------------------------------------------------------+

Use the and v keys to select which entry is highlighted.
Press enter to boot the selected OS, `e' to edit the commands
before booting or `c' for a command-line. ESC to return
previous menu.

The highlighted entry will be executed automatically in 0s.

Booting `OpenWrt'

[ 0.000000] Linux version 3.18.20 (buildbot@builder1) (gcc version 4.8.3 (Ope
nWrt/Linaro GCC 4.8-2014.04 r46450) ) #1 Fri Sep 4 20:41:03 CEST 2015
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000007ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] e820: last_pfn = 0x8000 max_arch_pfn = 0x100000
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] init_memory_mapping: [mem 0x07c00000-0x07ffffff]
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x07bfffff]
[ 0.000000] 128MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 08000000
[ 0.000000] low ram: 0 - 08000000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x07ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009ffff]
[ 0.000000] node 0: [mem 0x00100000-0x07ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x07ffffff]
[ 0.000000] Using APIC driver default
[ 0.000000] No local APIC present or hardware disabled
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] e820: [mem 0x08000000-0xffefffff] available for PCI devices
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag
es: 32415
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=f5d4f
8ee-02 rootfstype=ext4 rootwait console=tty0 console=ttyS0,38400n8 noinitrd
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Memory: 125012K/130684K available (3044K kernel code, 206K rwdata
, 636K rodata, 220K init, 260K bss, 5672K reserved)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfffa4000 - 0xfffff000 ( 364 kB)
[ 0.000000] vmalloc : 0xc8800000 - 0xfffa2000 ( 887 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
[ 0.000000] .init : 0xc13cf000 - 0xc1406000 ( 220 kB)
[ 0.000000] .data : 0xc12f9708 - 0xc13cdb00 ( 848 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12f9708 (3045 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor
mode...Ok.
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:24 0
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 431.651 MHz processor
[ 0.030007] Calibrating delay loop (skipped), value calculated using timer fr
equency.. 863.30 BogoMIPS (lpj=4316510)
[ 0.050014] pid_max: default: 32768 minimum: 301
[ 0.060197] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.070021] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.080824] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.080824] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.090010] CPU: Geode(TM) Integrated Processor by AMD PCS (fam: 05, model: 0
a, stepping: 02)
[ 0.120324] Performance Events: no PMU driver, software events only.
[ 0.142968] NET: Registered protocol family 16
[ 0.161174] cpuidle: using governor ladder
[ 0.171011] PCI: PCI BIOS revision 2.10 entry at 0xfced9, last bus=0
[ 0.180014] PCI: Using configuration type 1 for base access
[ 0.200540] SCSI subsystem initialized
[ 0.210955] usbcore: registered new interface driver usbfs
[ 0.220122] usbcore: registered new interface driver hub
[ 0.230090] usbcore: registered new device driver usb
[ 0.240365] PCI: Probing PCI hardware
[ 0.250198] PCI host bridge to bus 0000:00
[ 0.260030] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.270025] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.280022] pci_bus 0000:00: No busn resource found for root bus, will use [b
us 00-ff]
[ 0.301379] pci 0000:00:0f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]

[ 0.310022] pci 0000:00:0f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.320024] pci 0000:00:0f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]

[ 0.330023] pci 0000:00:0f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.343328] Switched to clocksource pit
[ 0.360268] NET: Registered protocol family 2
[ 0.364715] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.375655] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.384772] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.393900] TCP: reno registered
[ 0.403633] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.421196] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.430214] NET: Registered protocol family 1
[ 0.434308] platform rtc_cmos: registered platform RTC device (no PNP device
found)
[ 0.450639] alix: system is recognized as "PC Engines ALIX.2 v0.99h"
[ 0.459969] NatSemi SCx200 Driver
[ 0.470880] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.505615] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.523189] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORIT
Y) (c) 2001-2006 Red Hat, Inc.
[ 0.536377] msgmni has been set to 244
[ 0.548792] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2
52)
[ 0.561050] io scheduler noop registered
[ 0.572866] io scheduler deadline registered (default)
[ 0.578730] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.588068] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 921600) is a

NS16550A

[ 0.602222] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 921600) is a

NS16550A

[ 0.610294] Non-volatile memory driver v1.3
[ 0.622916] AMD Geode RNG detected
[ 0.633463] platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing

[ 0.644917] platform pc8736x_gpio.0: no device found
[ 0.660536] cs5535-gpio cs5535-gpio: reserved resource region [io 0x6100-0x6
1ff]
[ 0.673351] cs5535-mfgpt cs5535-mfgpt: reserved resource region [io 0x6200-0
x623f]
[ 0.686368] cs5535-mfgpt cs5535-mfgpt: 8 MFGPT timers available
[ 0.694403] cs5535-mfd 0000:00:0f.0: 5 devices registered.
[ 0.716709] scsi host0: pata_cs5536
[ 0.729205] scsi host1: pata_cs5536
[ 0.740139] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 0.75063] ata2: DUMMY
[ 0.759647] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
[ 0.776067] via-rhine 0000:00:09.0 eth0: VIA Rhine III (Management Adapter) a
t 0xc8808000, 00:0d:b9:15:d8:34, IRQ 10
[ 0.788461] via-rhine 0000:00:09.0 eth0: MII PHY found at address 1, status 0
x7849 advertising 05e1 Link 0000
[ 0.804508] via-rhine 0000:00:0a.0 eth1: VIA Rhine III (Management Adapter) a
t 0xc880a000, 00:0d:b9:15:d8:35, IRQ 11
[ 0.816882] via-rhine 0000:00:0a.0 eth1: MII PHY found at address 1, status 0
x7849 advertising 05e1 Link 0000
[ 0.832905] via-rhine 0000:00:0b.0 eth2: VIA Rhine III (Management Adapter) a
t 0xc880c000, 00:0d:b9:15:d8:36, IRQ 15
[ 0.835300] via-rhine 0000:00:0b.0 eth2: MII PHY found at address 1, status 0
x7849 advertising 05e1 Link 0000
[ 0.845262] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.854867] ehci-pci: EHCI PCI platform driver
[ 0.868415] ehci-pci 0000:00:0f.5: EHCI Host Controller
[ 0.874173] ehci-pci 0000:00:0f.5: new USB bus registered, assigned bus numbe
r 1
[ 0.886558] ehci-pci 0000:00:0f.5: irq 12, io mem 0xefffd000
[ 0.913386] ehci-pci 0000:00:0f.5: USB 2.0 started, EHCI 1.00
[ 0.932655] hub 1-0:1.0: USB hub found
[ 0.933990] hub 1-0:1.0: 4 ports detected
[ 0.947614] ehci-platform: EHCI generic platform driver
[ 0.953422] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.972027] ohci-pci: OHCI PCI platform driver
[ 0.975556] ohci-pci 0000:00:0f.4: OHCI PCI host controller
[ 0.992356] ohci-pci 0000:00:0f.4: new USB bus registered, assigned bus numbe
r 2
[ 0.994668] ohci-pci 0000:00:0f.4: irq 12, io mem 0xefffe000
[ 1.096766] hub 2-0:1.0: USB hub found
[ 1.108120] hub 2-0:1.0: 4 ports detected
[ 1.121099] ohci-platform: OHCI generic platform driver
[ 1.148703] i8042: No controller found
[ 1.160529] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 1.169681] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
[ 1.179043] cs5535-smb cs5535-smb: SCx200 device 'CS5535 ACB0' registered
[ 1.191385] cs5535-mfgpt cs5535-mfgpt: registered timer 0
[ 1.197792] sc1200wdt: build 20020303
[ 1.208822] sc1200wdt: io parameter must be specified
[ 1.214618] cs5535-mfgpt cs5535-mfgpt: registered timer 1
[ 1.230871] cs5535-clockevt: Registering MFGPT timer as a clock event, using
IRQ 7
[ 1.234231] TCP: cubic registered
[ 1.243321] NET: Registered protocol family 17
[ 1.256885] bridge: automatic filtering via arp/ip/ip6tables has been depreca
ted. Update your scripts to load br_netfilter if you need this.
[ 1.264866] Bridge firewalling registered
[ 1.277039] 8021q: 802.1Q VLAN Support v1.8
[ 1.289977] Using IPI Shortcut mode
[ 1.301977] ata1.00: CFA: SanDisk SDCFH-256, FhDA0145, max PIO4
[ 1.309864] ata1.00: 501760 sectors, multi 0: LBA
[ 1.315103] rtc_cmos rtc_cmos: setting system clock to 2015-09-25 10:17:51 UT
C (1443176271)
[ 1.340253] ata1.00: configured for PIO4
[ 1.352588] scsi 0:0:0:0: Direct-Access ATA SanDisk SDCFH-25 0145 PQ
: 0 ANSI: 5
[ 1.358430] sd 0:0:0:0: [sda] 501760 512-byte logical blocks: (256 MB/245 MiB
)
[ 1.371121] sd 0:0:0:0: [sda] Write Protect is off
[ 1.375806] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doe
sn't support DPO or FUA
[ 1.386293] sda: sda1 sda2
[ 1.396264] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 1.464870] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
[ 1.466199] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[ 1.476566] Freeing unused kernel memory: 220K (c13cf000 - c1406000)
[ 1.485967] Switched to clocksource tsc
[ 1.844120] init: Console is alive
[ 1.854769] init: - watchdog -
[ 2.533032] Button Hotplug driver version 0.4.1
[ 2.869368] init: - preinit -
[ 2.897817] random: nonblocking pool is initialized
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 6.075760] mount_root: mounting /dev/root
[ 6.088502] EXT4-fs (sda2): warning: mounting unchecked fs, running e2fsck is

recommended

[ 6.116732] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 6.197248] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
mv: can't rename '/mnt/sysupgrade.tgz': No such file or directory
[ 6.242004] procd: - early -
[ 6.251320] procd: - watchdog -
[ 6.903016] procd: - ubus -
[ 7.929405] procd: - init -
Please press Enter to activate this console.
[ 8.399410] Geode LX AES 0000:00:01.2: GEODE AES engine enabled.
[ 8.469259] NET: Registered protocol family 10
[ 8.489885] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 8.543394] Loading modules backported from Linux version master-2015-03-09-0
-g141f155
[ 8.567296] Backport generated by backports.git backports-20150129-0-gdd4a670

[ 8.590715] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 8.613463] nf_conntrack version 0.5.0 (1956 buckets, 7824 max)
[ 8.650239] xt_time: kernel timezone is -0000
[ 8.681421] cfg80211: Calling CRDA to update world regulatory domain
[ 8.735295] cfg80211: World regulatory domain updated:
[ 8.752780] cfg80211: DFS Master region: unset
[ 8.767238] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gai
n, max_eirp), (dfs_cac_time)
[ 8.798553] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 m
Bm), (N/A)
[ 8.824610] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 m
Bm), (N/A)
[ 8.850667] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 m
Bm), (N/A)
[ 8.876724] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 m
Bm), (N/A)
[ 8.902786] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AU
TO), (N/A, 2000 mBm), (0 s)
[ 8.933268] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000
mBm), (0 s)
[ 8.959568] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 m
Bm), (N/A)
[ 8.985625] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0
mBm), (N/A)
[ 9.060527] PPP generic driver version 2.4.2
[ 9.075305] NET: Registered protocol family 24
[ 9.226542] Clocksource tsc unstable (delta = 279991012 ns)
[ 9.243527] Switched to clocksource pit
[ 14.090863] 8021q: adding VLAN 0 to HW filter on device eth0
[ 14.109267] device eth0 entered promiscuous mode
[ 14.134785] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 14.174832] 8021q: adding VLAN 0 to HW filter on device eth1
[ 14.182348] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready

comment:5 Changed 2 years ago by nbd

Looks like it has booted just fine. Have you tried all ethernet ports to see if you can connect?

comment:6 Changed 2 years ago by anonymous

Yes. And I don't use IPv6.
I can't connect either via telnet, ssh or http.

comment:7 Changed 2 years ago by anonymous

Please, close this ticket.

I was wrong. In comparison with the Barrier Breaker 14.07 in Chaos Calmer 15.05 default LAN interface has been moved from eth1 to eth0. Sometimes with first boot LAN interface is available with some delay.

Sorry. Problem is solved.

In my opinion move LAN interface to another ethernet adapter without warning is a bad idea.

Add Comment

Modify Ticket

Action
as new .
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.