Modify

Opened 2 years ago

Last modified 2 years ago

#20573 new defect

Pandaboard ES wifi wl12xx

Reported by: anonymous Owned by: developers
Priority: normal Milestone: Chaos Calmer 15.05
Component: kernel Version: Trunk
Keywords: Pandaboard omap4 wifi wl12xx Cc:

Description

[ 9.178955] wl1271_sdio: probe of mmc1:0001:2 failed with error -61

WIFI don't work!

[ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: TI OMAP4 PandaBoard-ES
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 261888
[ 0.000000] free_area_init_node: node 0, pgdat c05ac340, node_mem_map eeff9000
[ 0.000000] Normal zone: 1520 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 194560 pages, LIFO batch:31
[ 0.000000] HighMem zone: 526 pages used for memmap
[ 0.000000] HighMem zone: 67328 pages, LIFO batch:15
[ 0.000000] OMAP4460 ES1.1
[ 0.000000] L2C: platform modifies aux control register: 0x0e070000 -> 0x3e470000
[ 0.000000] L2C: DT/platform modifies aux control register: 0x0e070000 -> 0x3e470000
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines
[ 0.000000] OMAP L2C310: ROM does not support power control setting
[ 0.000000] L2C-310 dynamic clock gating disabled, standby mode disabled
[ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB
[ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x7e470000
[ 0.000000] PERCPU: Embedded 9 pages/cpu @eefb1000 s7296 r8192 d21376 u36864
[ 0.000000] pcpu-alloc: s7296 r8192 d21376 u36864 alloc=9*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260368
[ 0.000000] Kernel command line: console=ttyO2,115200n8 root=/dev/mmcblk0p2 rw ext2 rootwait verbose debug
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 1031876K/1047552K available (4211K kernel code, 316K rwdata, 1240K rodata, 300K init, 245K bss, 15676K reserved, 269312K highmem)
[ 0.000000] Virtual kernel memory layout:

vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)

.text : 0xc0008000 - 0xc055af0c (5452 kB)
.init : 0xc055b000 - 0xc05a6000 ( 300 kB)
.data : 0xc05a6000 - 0xc05f5388 ( 317 kB)

.bss : 0xc05f5388 - 0xc0632a58 ( 246 kB)

[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ti_dt_clocks_register: failed to lookup clock node bandgap_fclk
[ 0.000000] OMAP clockevent source: timer1 at 32768 Hz
[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns
[ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz
[ 0.000946] Console: colour dummy device 80x30
[ 0.000946] Calibrating delay loop... 1397.55 BogoMIPS (lpj=6987776)
[ 0.090209] pid_max: default: 32768 minimum: 301
[ 0.090393] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.090423] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.090942] CPU: Testing write buffer coherency: ok
[ 0.091156] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.091217] Setting up static identity map for 0x80013b78 - 0x80013bd0
[ 0.092590] CPU1: Booted secondary processor
[ 0.180206] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.180267] Brought up 2 CPUs
[ 0.180297] SMP: Total of 2 processors activated (2795.11 BogoMIPS).
[ 0.180297] CPU: All CPU(s) started in SVC mode.
[ 0.183868] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.185424] omap_hwmod: l3_main_3 using broken dt data from ocp
[ 0.186767] omap_hwmod: l3_main_2 using broken dt data from ocp
[ 0.278381] pinctrl core: initialized pinctrl subsystem
[ 0.278747] regulator-dummy: no parameters
[ 0.294555] NET: Registered protocol family 16
[ 0.295349] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.320190] cpuidle: using governor ladder
[ 0.340179] cpuidle: using governor menu
[ 0.344024] OMAP GPIO hardware version 0.1
[ 0.346801] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[ 0.347198] irq: no irq domain found for /ocp/pinmux@4a100040 !
[ 0.347442] irq: no irq domain found for /ocp/pinmux@4a100040 !
[ 0.347717] irq: no irq domain found for /ocp/pinmux@4a100040 !
[ 0.355926] platform 4b501000.aes: Cannot lookup hwmod 'aes'
[ 0.356140] platform 480a5000.des: Cannot lookup hwmod 'des'
[ 0.361053] OMAP DMA hardware revision 0.0
[ 0.406005] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver
[ 0.480194] hsusb1_vbus: 3300 mV
[ 0.480346] reg-fixed-voltage wl12xx_vmmc: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_gpio, deferring probe
[ 0.480346] platform wl12xx_vmmc: Driver reg-fixed-voltage requests probe deferral
[ 0.483520] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c1_pins, deferring probe
[ 0.483520] platform 48070000.i2c: Driver omap_i2c requests probe deferral
[ 0.483581] omap_i2c 48072000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c2_pins, deferring probe
[ 0.483581] platform 48072000.i2c: Driver omap_i2c requests probe deferral
[ 0.483612] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c3_pins, deferring probe
[ 0.483642] platform 48060000.i2c: Driver omap_i2c requests probe deferral
[ 0.483673] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c4_pins, deferring probe
[ 0.483673] platform 48350000.i2c: Driver omap_i2c requests probe deferral
[ 0.483947] pps_core: LinuxPPS API ver. 1 registered
[ 0.483947] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@…>
[ 0.483978] PTP clock support registered
[ 0.484710] omap-mailbox 4a0f4000.mailbox: omap mailbox rev 0x400
[ 0.484954] Advanced Linux Sound Architecture Driver Initialized.
[ 0.485717] Switched to clocksource 32k_counter
[ 0.493438] NET: Registered protocol family 2
[ 0.494079] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.494171] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.494323] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.494384] TCP: reno registered
[ 0.494415] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.494445] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.494689] NET: Registered protocol family 1
[ 0.498138] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.499542] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.499572] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.499816] msgmni has been set to 1489
[ 0.500854] bounce: pool size: 64 pages
[ 0.500854] io scheduler noop registered
[ 0.500885] io scheduler deadline registered (default)
[ 0.502288] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406
[ 0.502471] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56
[ 0.504241] OMAP DSS rev 4.0
[ 0.507202] omapfb omapfb: no displays
[ 0.507324] omapfb omapfb: failed to setup omapfb
[ 0.507354] platform omapfb: Driver omapfb requests probe deferral
[ 0.507934] Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
[ 0.509338] omap_uart 4806a000.serial: no wakeirq for uart0
[ 0.509429] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 104, base_baud = 3000000) is a OMAP UART0
[ 0.509857] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 105, base_baud = 3000000) is a OMAP UART1
[ 0.510284] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 106, base_baud = 3000000) is a OMAP UART2
[ 1.299713] console [ttyO2] enabled
[ 1.303771] 4806e000.serial: ttyO3 at MMIO 0x4806e000 (irq = 102, base_baud = 3000000) is a OMAP UART3
[ 1.318023] i2c /dev entries driver
[ 1.322570] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 1.330780] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517
[ 1.337677] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral
[ 1.345336] omap_hsmmc 480d5000.mmc: unable to get vmmc regulator -517
[ 1.352233] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral
[ 1.360900] emif 4c000000.emif: emif_probe: device configured with addr = f00e6000 and IRQ142
[ 1.370086] emif 4d000000.emif: emif_probe: device configured with addr = f00ec000 and IRQ143
[ 1.381988] omap-abe-twl6040 sound: ASoC: CODEC DAI twl6040-legacy not registered
[ 1.389862] omap-abe-twl6040 sound: snd_soc_register_card() failed: -517
[ 1.396911] platform sound: Driver omap-abe-twl6040 requests probe deferral
[ 1.404846] TCP: cubic registered
[ 1.408447] NET: Registered protocol family 10
[ 1.414672] NET: Registered protocol family 17
[ 1.419403] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 1.432617] 8021q: 802.1Q VLAN Support v1.8
[ 1.437133] twl: not initialized
[ 1.440490] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
[ 1.448883] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
[ 1.457275] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
[ 1.465637] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
[ 1.473999] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
[ 1.482391] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
[ 1.490753] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1410000 Vs max 1316660
[ 1.499114] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu
[ 1.506317] omap2_set_init_voltage: unable to set vdd_mpu
[ 1.511962] omap2_set_init_voltage: unable to find boot up OPP for vdd_core
[ 1.519226] omap2_set_init_voltage: unable to set vdd_core
[ 1.524963] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva
[ 1.532165] omap2_set_init_voltage: unable to set vdd_iva
[ 1.538116] Power Management for TI OMAP4+ devices.
[ 1.543182] OMAP4 PM: u-boot >= v2012.07 is required for full PM support
[ 1.550659] Registering SWP/SWPB emulation handler
[ 1.556701] vwl1271: 1800 mV
[ 1.561096] Skipping twl internal clock init and using bootloader value (unknown osc rate)
[ 1.570861] twl 0-0048: PIH (irq 39) nested IRQs
[ 1.576843] twl_rtc 48070000.i2c:twl@48:rtc: Power up reset detected.
[ 1.584350] twl_rtc 48070000.i2c:twl@48:rtc: Enabling TWL-RTC
[ 1.592987] twl_rtc 48070000.i2c:twl@48:rtc: rtc core: registered 48070000.i2c:twl@48 as rtc0
[ 1.602661] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV
[ 1.608856] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV
[ 1.615081] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV
[ 1.621276] VMMC: 1200 <--> 3000 mV at 3000 mV
[ 1.626922] VPP: 1800 <--> 2500 mV at 1900 mV
[ 1.632507] VUSIM: 1200 <--> 2900 mV at 1800 mV
[ 1.638061] VDAC: 1800 mV
[ 1.641387] VANA: 2100 mV
[ 1.645050] VCXIO: 1800 mV
[ 1.648345] VUSB: 3300 mV
[ 1.652099] V1V8: 1800 mV
[ 1.655761] V2V1: 2100 mV
[ 1.660125] twl6040 0-004b: clk32k is not handled
[ 1.667419] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz
[ 1.673889] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz
[ 1.680847] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz
[ 1.687286] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz
[ 1.693664] omapfb omapfb: no displays
[ 1.697814] omapfb omapfb: failed to setup omapfb
[ 1.697814] platform omapfb: Driver omapfb requests probe deferral
[ 1.889801] omap-abe-twl6040 sound: twl6040-legacy <-> 40132000.mcpdm mapping ok
[ 1.901977] omapfb omapfb: no displays
[ 1.906280] omapfb omapfb: failed to setup omapfb
[ 1.911376] platform omapfb: Driver omapfb requests probe deferral
[ 1.920196] twl_rtc 48070000.i2c:twl@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[ 1.943695] VUSB: disabling
[ 1.947296] VANA: disabling
[ 1.950744] VDAC: disabling
[ 1.956268] ALSA device list:
[ 1.956268] #0: PandaBoardES
[ 1.963195] Waiting for root device /dev/mmcblk0p2...
[ 1.971679] mmc0: host does not support reading read-only switch, assuming write-enable
[ 1.982269] mmc0: new high speed SDHC card at address 210c
[ 1.988922] mmcblk0: mmc0:210c SD08G 7.42 GiB
[ 1.995391] mmcblk0: p1 p2
[ 2.000183] omapfb omapfb: no displays
[ 2.004638] omapfb omapfb: failed to setup omapfb
[ 2.009704] platform omapfb: Driver omapfb requests probe deferral
[ 2.020141] omap_hsmmc 480d5000.mmc: card claims to support voltages below defined range
[ 2.038696] mmc1: queuing unknown CIS tuple 0x91 (3 bytes)
[ 2.045532] mmc1: new SDIO card at address 0001
[ 2.077545] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
[ 2.086883] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
[ 2.347869] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.356689] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 2.356689] Freeing unused kernel memory: 300K (c055b000 - c05a6000)
[ 2.457122] init: Console is alive
[ 2.469482] init: - watchdog -
[ 2.626342] usbcore: registered new interface driver usbfs
[ 2.633422] usbcore: registered new interface driver hub
[ 2.639129] usbcore: registered new device driver usb
[ 2.648498] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.656402] ehci-platform: EHCI generic platform driver
[ 3.475280] init: - preinit -
[ 6.744628] mount_root: mounting /dev/root
[ 6.750274] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 6.764404] procd: - early -
[ 6.767730] procd: - watchdog -
[ 7.419250] procd: - ubus -
[ 8.479492] random: ubusd urandom read with 23 bits of entropy available
[ 8.496582] procd: - init -
[ 8.948242] ehci-omap: OMAP-EHCI Host Controller driver
[ 8.955810] ehci-omap 4a064c00.ehci: Can't get PHY device for port 0: -517
[ 8.963134] platform 4a064c00.ehci: Driver ehci-omap requests probe deferral
[ 8.974945] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 8.989166] omapfb omapfb: no displays
[ 8.993438] omapfb omapfb: failed to setup omapfb
[ 8.997375] platform omapfb: Driver omapfb requests probe deferral
[ 9.025909] ehci-omap 4a064c00.ehci: EHCI Host Controller
[ 9.025909] Loading modules backported from Linux version master-2015-07-21-0-g47cd203
[ 9.026611] Backport generated by backports.git backports-20150626-0-gc1a4168
[ 9.028656] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 9.031494] usbcore: registered new interface driver kaweth
[ 9.035522] nf_conntrack version 0.5.0 (16127 buckets, 64508 max)
[ 9.059143] ehci-omap 4a064c00.ehci: new USB bus registered, assigned bus number 1
[ 9.073944] ehci-omap 4a064c00.ehci: irq 109, io mem 0x4a064c00
[ 9.096160] ehci-omap 4a064c00.ehci: USB 2.0 started, EHCI 1.00
[ 9.103271] hub 1-0:1.0: USB hub found
[ 9.107788] hub 1-0:1.0: 3 ports detected
[ 9.114074] omapfb omapfb: no displays
[ 9.118408] omapfb omapfb: failed to setup omapfb
[ 9.120117] platform omapfb: Driver omapfb requests probe deferral
[ 9.160186] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[ 9.168212] usbcore: registered new interface driver pegasus
[ 9.178955] wl1271_sdio: probe of mmc1:0001:2 failed with error -61
[ 9.194549] xt_time: kernel timezone is -0000
[ 9.201049] usbcore: registered new interface driver asix
[ 9.208160] usbcore: registered new interface driver ax88179_178a
[ 9.230041] cfg80211: World regulatory domain updated:
[ 9.235870] cfg80211: DFS Master region: unset
[ 9.235870] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 9.250732] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 9.259246] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 9.267883] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 9.276336] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 9.286285] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 9.296264] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 9.297485] usbcore: registered new interface driver dm9601
[ 9.310638] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 9.319030] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 9.369750] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[ 9.385284] PPP generic driver version 2.4.2
[ 9.391143] NET: Registered protocol family 24
[ 9.397796] usbcore: registered new interface driver smsc95xx
[ 9.435852] usb 1-1: new high-speed USB device number 2 using ehci-omap
[ 9.590698] hub 1-1:1.0: USB hub found
[ 9.595123] hub 1-1:1.0: 5 ports detected
[ 9.603546] omapfb omapfb: no displays
[ 9.607910] omapfb omapfb: failed to setup omapfb
[ 9.608917] platform omapfb: Driver omapfb requests probe deferral
[ 10.026123] usb 1-1.1: new high-speed USB device number 3 using ehci-omap
[ 10.339508] smsc95xx v1.0.4
[ 10.468475] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, 7a:12:9d:f0:fb:4f
[ 10.482330] omapfb omapfb: no displays
[ 10.486602] omapfb omapfb: failed to setup omapfb
[ 10.491668] platform omapfb: Driver omapfb requests probe deferral
[ 13.575805] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 13.616271] device eth0 entered promiscuous mode
[ 13.624114] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready

Attachments (0)

Change History (5)

comment:1 Changed 2 years ago by zloop

I think this might be a similar bug as described by:

"[ 1.660125] twl6040 0-004b: clk32k is not handled"
http://www.spinics.net/lists/arm-kernel/msg446193.html

according to that list this should fix wlan

comment:2 Changed 2 years ago by zloop

pleasy try to apply that patch and report if it works

comment:3 Changed 2 years ago by anonymous

Thanks, but i apply path but no change.

[ 9.317718] wl1271_sdio: probe of mmc1:0001:2 failed with error -61
[ 1.611907] twl6040 0-004b: clk32k is not handled!!?

[    0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: TI OMAP4 PandaBoard-ES
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 261888
[    0.000000] free_area_init_node: node 0, pgdat c05ac340, node_mem_map eeff9000
[    0.000000]   Normal zone: 1520 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 194560 pages, LIFO batch:31
[    0.000000]   HighMem zone: 526 pages used for memmap
[    0.000000]   HighMem zone: 67328 pages, LIFO batch:15
[    0.000000] OMAP4460 ES1.1
[    0.000000] L2C: platform modifies aux control register: 0x0e070000 -> 0x3e470000
[    0.000000] L2C: DT/platform modifies aux control register: 0x0e070000 -> 0x3e470000
[    0.000000] L2C-310 enabling early BRESP for Cortex-A9
[    0.000000] L2C-310 ID prefetch enabled, offset 1 lines
[    0.000000] OMAP L2C310: ROM does not support power control setting
[    0.000000] L2C-310 dynamic clock gating disabled, standby mode disabled
[    0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB
[    0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x7e470000
[    0.000000] PERCPU: Embedded 9 pages/cpu @eefb1000 s7296 r8192 d21376 u36864
[    0.000000] pcpu-alloc: s7296 r8192 d21376 u36864 alloc=9*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260368
[    0.000000] Kernel command line: console=ttyO2,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 1031876K/1047552K available (4211K kernel code, 316K rwdata, 1240K rodata, 300K init, 245K bss, 15676K reserved, 269312K highmem)
[    0.000000] Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)
    vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
    lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc055af0c   (5452 kB)
      .init : 0xc055b000 - 0xc05a6000   ( 300 kB)
      .data : 0xc05a6000 - 0xc05f5388   ( 317 kB)
       .bss : 0xc05f5388 - 0xc0632a58   ( 246 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ti_dt_clocks_register: failed to lookup clock node bandgap_fclk
[    0.000000] OMAP clockevent source: timer1 at 32768 Hz
[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns
[    0.000000] OMAP clocksource: 32k_counter at 32768 Hz
[    0.000976] Console: colour dummy device 80x30
[    0.001007] Calibrating delay loop... 1397.55 BogoMIPS (lpj=6987776)
[    0.090209] pid_max: default: 32768 minimum: 301
[    0.090393] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.090423] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.090911] CPU: Testing write buffer coherency: ok
[    0.091156] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.091217] Setting up static identity map for 0x80013b78 - 0x80013bd0
[    0.092590] CPU1: Booted secondary processor
[    0.180206] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.180267] Brought up 2 CPUs
[    0.180297] SMP: Total of 2 processors activated (2795.11 BogoMIPS).
[    0.180297] CPU: All CPU(s) started in SVC mode.
[    0.183837] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.185363] omap_hwmod: l3_main_3 using broken dt data from ocp
[    0.186706] omap_hwmod: l3_main_2 using broken dt data from ocp
[    0.278076] pinctrl core: initialized pinctrl subsystem
[    0.278442] regulator-dummy: no parameters
[    0.294250] NET: Registered protocol family 16
[    0.295043] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.320190] cpuidle: using governor ladder
[    0.340179] cpuidle: using governor menu
[    0.343994] OMAP GPIO hardware version 0.1
[    0.346801] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[    0.347198] irq: no irq domain found for /ocp/pinmux@4a100040 !
[    0.347442] irq: no irq domain found for /ocp/pinmux@4a100040 !
[    0.347717] irq: no irq domain found for /ocp/pinmux@4a100040 !
[    0.355926] platform 4b501000.aes: Cannot lookup hwmod 'aes'
[    0.356140] platform 480a5000.des: Cannot lookup hwmod 'des'
[    0.361083] OMAP DMA hardware revision 0.0
[    0.406005] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver
[    0.480194] hsusb1_vbus: 3300 mV
[    0.480346] reg-fixed-voltage wl12xx_vmmc: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_gpio, deferring probe
[    0.480377] platform wl12xx_vmmc: Driver reg-fixed-voltage requests probe deferral
[    0.483551] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c1_pins, deferring probe
[    0.483551] platform 48070000.i2c: Driver omap_i2c requests probe deferral
[    0.483612] omap_i2c 48072000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c2_pins, deferring probe
[    0.483612] platform 48072000.i2c: Driver omap_i2c requests probe deferral
[    0.483642] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c3_pins, deferring probe
[    0.483673] platform 48060000.i2c: Driver omap_i2c requests probe deferral
[    0.483703] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c4_pins, deferring probe
[    0.483703] platform 48350000.i2c: Driver omap_i2c requests probe deferral
[    0.483978] pps_core: LinuxPPS API ver. 1 registered
[    0.483978] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.484008] PTP clock support registered
[    0.484741] omap-mailbox 4a0f4000.mailbox: omap mailbox rev 0x400
[    0.484985] Advanced Linux Sound Architecture Driver Initialized.
[    0.485748] Switched to clocksource 32k_counter
[    0.493469] NET: Registered protocol family 2
[    0.494110] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.494201] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.494323] TCP: Hash tables configured (established 8192 bind 8192)
[    0.494415] TCP: reno registered
[    0.494415] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.494476] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.494689] NET: Registered protocol family 1
[    0.498107] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.499481] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.499511] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.499786] msgmni has been set to 1489
[    0.500610] bounce: pool size: 64 pages
[    0.500610] io scheduler noop registered
[    0.500640] io scheduler deadline registered (default)
[    0.502014] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406
[    0.502227] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56
[    0.503997] OMAP DSS rev 4.0
[    0.506958] omapfb omapfb: no displays
[    0.507080] omapfb omapfb: failed to setup omapfb
[    0.507110] platform omapfb: Driver omapfb requests probe deferral
[    0.507690] Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
[    0.509094] omap_uart 4806a000.serial: no wakeirq for uart0
[    0.509216] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 104, base_baud = 3000000) is a OMAP UART0
[    0.509643] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 105, base_baud = 3000000) is a OMAP UART1
[    0.510040] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 106, base_baud = 3000000) is a OMAP UART2
[    1.252410] console [ttyO2] enabled
[    1.256500] 4806e000.serial: ttyO3 at MMIO 0x4806e000 (irq = 102, base_baud = 3000000) is a OMAP UART3
[    1.270690] i2c /dev entries driver
[    1.275268] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[    1.283477] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517
[    1.290374] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral
[    1.298034] omap_hsmmc 480d5000.mmc: unable to get vmmc regulator -517
[    1.304901] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral
[    1.313598] emif 4c000000.emif: emif_probe: device configured with addr = f00e6000 and IRQ142
[    1.322784] emif 4d000000.emif: emif_probe: device configured with addr = f00ec000 and IRQ143
[    1.334686] omap-abe-twl6040 sound: ASoC: CODEC DAI twl6040-legacy not registered
[    1.342559] omap-abe-twl6040 sound: snd_soc_register_card() failed: -517
[    1.349609] platform sound: Driver omap-abe-twl6040 requests probe deferral
[    1.357543] TCP: cubic registered
[    1.361114] NET: Registered protocol family 10
[    1.366638] NET: Registered protocol family 17
[    1.371337] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    1.384552] 8021q: 802.1Q VLAN Support v1.8
[    1.389068] twl: not initialized
[    1.392456] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
[    1.400817] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
[    1.409210] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
[    1.417602] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
[    1.425994] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
[    1.434356] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
[    1.442749] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1410000 Vs max 1316660
[    1.451141] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu
[    1.458343] omap2_set_init_voltage: unable to set vdd_mpu
[    1.463989] omap2_set_init_voltage: unable to find boot up OPP for vdd_core
[    1.471282] omap2_set_init_voltage: unable to set vdd_core
[    1.477050] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva
[    1.484222] omap2_set_init_voltage: unable to set vdd_iva
[    1.490173] Power Management for TI OMAP4+ devices.
[    1.495269] OMAP4 PM: u-boot >= v2012.07 is required for full PM support
[    1.502410] Registering SWP/SWPB emulation handler
[    1.508789] vwl1271: 1800 mV
[    1.513122] Skipping twl internal clock init and using bootloader value (unknown osc rate)
[    1.523132] twl 0-0048: PIH (irq 39) nested IRQs
[    1.528717] twl_rtc 48070000.i2c:twl@48:rtc: Power up reset detected.
[    1.536224] twl_rtc 48070000.i2c:twl@48:rtc: Enabling TWL-RTC
[    1.544830] twl_rtc 48070000.i2c:twl@48:rtc: rtc core: registered 48070000.i2c:twl@48 as rtc0
[    1.554504] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV
[    1.560699] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV
[    1.566955] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV
[    1.573150] VMMC: 1200 <--> 3000 mV at 3000 mV
[    1.578765] VPP: 1800 <--> 2500 mV at 1900 mV
[    1.584350] VUSIM: 1200 <--> 2900 mV at 1800 mV
[    1.589630] VDAC: 1800 mV
[    1.593231] VANA: 2100 mV
[    1.596923] VCXIO: 1800 mV
[    1.600341] VUSB: 3300 mV
[    1.603973] V1V8: 1800 mV
[    1.607635] V2V1: 2100 mV
[    1.611907] twl6040 0-004b: clk32k is not handled!!?
[    1.619628] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz
[    1.626129] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz
[    1.632934] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz
[    1.639404] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz
[    1.645782] omapfb omapfb: no displays
[    1.645782] omapfb omapfb: failed to setup omapfb
[    1.645782] platform omapfb: Driver omapfb requests probe deferral
[    1.832550] omap-abe-twl6040 sound: twl6040-legacy <-> 40132000.mcpdm mapping ok
[    1.845062] omapfb omapfb: no displays
[    1.849060] omapfb omapfb: failed to setup omapfb
[    1.849060] platform omapfb: Driver omapfb requests probe deferral
[    1.862945] twl_rtc 48070000.i2c:twl@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[    1.886688] VUSB: disabling
[    1.890136] VANA: disabling
[    1.893493] VDAC: disabling
[    1.898315] ALSA device list:
[    1.901794]   #0: PandaBoardES
[    1.906005] Waiting for root device /dev/mmcblk0p2...
[    1.919647] mmc0: host does not support reading read-only switch, assuming write-enable
[    1.930206] mmc0: new high speed SDHC card at address 210c
[    1.936950] mmcblk0: mmc0:210c SD08G 7.42 GiB
[    1.943267]  mmcblk0: p1 p2
[    1.947937] omapfb omapfb: no displays
[    1.951599] omap_hsmmc 480d5000.mmc: card claims to support voltages below defined range
[    1.960815] omapfb omapfb: failed to setup omapfb
[    1.961822] mmc1: queuing unknown CIS tuple 0x91 (3 bytes)
[    1.962829] mmc1: new SDIO card at address 0001
[    1.976318] platform omapfb: Driver omapfb requests probe deferral
[    2.270019] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    2.270019] VFS: Mounted root (ext4 filesystem) on device 179:2.
[    2.285675] Freeing unused kernel memory: 300K (c055b000 - c05a6000)
[    2.388061] init: Console is alive
[    2.393371] init: - watchdog -
[    2.549285] usbcore: registered new interface driver usbfs
[    2.555419] usbcore: registered new interface driver hub
[    2.561157] usbcore: registered new device driver usb
[    2.570617] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.578308] ehci-platform: EHCI generic platform driver
[    3.399566] init: - preinit -
[    6.522521] mount_root: mounting /dev/root
[    6.528198] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    6.541931] procd: - early -
[    6.541931] procd: - watchdog -
[    7.327056] procd: - ubus -
[    8.332000] random: ubusd urandom read with 21 bits of entropy available
[    8.343963] procd: - init -
[    9.034851] ehci-omap: OMAP-EHCI Host Controller driver
[    9.035797] ehci-omap 4a064c00.ehci: Can't get PHY device for port 0: -517
[    9.045898] platform 4a064c00.ehci: Driver ehci-omap requests probe deferral
[    9.061218] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    9.075286] omapfb omapfb: no displays
[    9.079711] omapfb omapfb: failed to setup omapfb
[    9.084686] platform omapfb: Driver omapfb requests probe deferral
[    9.105987] ehci-omap 4a064c00.ehci: EHCI Host Controller
[    9.111816] ehci-omap 4a064c00.ehci: new USB bus registered, assigned bus number 1
[    9.119964] ehci-omap 4a064c00.ehci: irq 109, io mem 0x4a064c00
[    9.135528] Loading modules backported from Linux version master-2015-07-21-0-g47cd203
[    9.143920] Backport generated by backports.git backports-20150626-0-gc1a4168
[    9.147705] ehci-omap 4a064c00.ehci: USB 2.0 started, EHCI 1.00
[    9.148834] hub 1-0:1.0: USB hub found
[    9.149139] hub 1-0:1.0: 3 ports detected
[    9.150604] omapfb omapfb: no displays
[    9.150604] omapfb omapfb: failed to setup omapfb
[    9.150604] platform omapfb: Driver omapfb requests probe deferral
[    9.183868] ip_tables: (C) 2000-2006 Netfilter Core Team
[    9.192749] usbcore: registered new interface driver kaweth
[    9.202880] nf_conntrack version 0.5.0 (16127 buckets, 64508 max)
[    9.298950] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[    9.307037] usbcore: registered new interface driver pegasus
[    9.317718] wl1271_sdio: probe of mmc1:0001:2 failed with error -61
[    9.334289] xt_time: kernel timezone is -0000
[    9.340789] usbcore: registered new interface driver asix
[    9.348205] usbcore: registered new interface driver ax88179_178a
[    9.370452] cfg80211: World regulatory domain updated:
[    9.376129] cfg80211:  DFS Master region: unset
[    9.380798] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    9.391113] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    9.393341] usbcore: registered new interface driver dm9601
[    9.399566] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    9.413818] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    9.415802] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    9.432220] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    9.435760] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    9.450683] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    9.450683] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    9.465789] usb 1-1: new high-speed USB device number 2 using ehci-omap
[    9.513824] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[    9.528381] PPP generic driver version 2.4.2
[    9.534759] NET: Registered protocol family 24
[    9.541290] usbcore: registered new interface driver smsc95xx
[    9.619110] hub 1-1:1.0: USB hub found
[    9.623474] hub 1-1:1.0: 5 ports detected
[    9.631256] omapfb omapfb: no displays
[    9.635772] omapfb omapfb: failed to setup omapfb
[    9.640777] platform omapfb: Driver omapfb requests probe deferral
[   10.005798] usb 1-1.1: new high-speed USB device number 3 using ehci-omap
[   10.131011] smsc95xx v1.0.4
[   10.579620] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, 6a:c3:e3:66:38:14
[   10.593109] omapfb omapfb: no displays
[   10.597137] omapfb omapfb: failed to setup omapfb
[   10.602355] platform omapfb: Driver omapfb requests probe deferral
[   13.834259] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[   13.892730] device eth0 entered promiscuous mode
[   13.900878] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready

comment:4 Changed 2 years ago by zloop

Which Kernel version are you using ? It is missing from the log

Are you trying Kernel 4.1 ?

comment:5 Changed 2 years ago by anonymous

I use old Kernel 3.18.21, with the new 4.1 wifi work! Without any patch.
Thank you for your time!

Add Comment

Modify Ticket

Action
as new .
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.