Modify

Opened 2 years ago

Closed 2 years ago

#20382 closed defect (wontfix)

b43-phy0 ERROR: FOUND UNSUPPORTED PHY (Buffalo WXR-1900DHP)

Reported by: anonymous Owned by: developers
Priority: normal Milestone: Chaos Calmer 15.05
Component: packages Version: Trunk
Keywords: Cc:

Description

b43 driver is not working using r46705.
Please see the following dmesg.
Thanks.

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.18.20 (root@vmu1404x) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r46705) ) #1 SMP Sun Aug 23 04:37:18 JST 2015
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Buffalo WXR-1900DHP
[    0.000000] bootconsole [earlycon0] enabled
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] PERCPU: Embedded 9 pages/cpu @c6bd4000 s5952 r8192 d22720 u36864
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130816
[    0.000000] Kernel command line: console=ttyS0,115200 earlyprintk
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 515828K/524288K available (2762K kernel code, 101K rwdata, 760K rodata, 172K init, 271K bss, 8460K reserved, 393216K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xc8800000 - 0xff000000   ( 872 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0378dc4   (3524 kB)
[    0.000000]       .init : 0xc0379000 - 0xc03a4000   ( 172 kB)
[    0.000000]       .data : 0xc03a4000 - 0xc03bd768   ( 102 kB)
[    0.000000]        .bss : 0xc03bd768 - 0xc040147c   ( 272 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] L2C: platform modifies aux control register: 0x0a130000 -> 0x7a530001
[    0.000000] L2C: platform provided aux values permit register corruption.
[    0.000000] L2C: DT/platform modifies aux control register: 0x0a130000 -> 0x7a530001
[    0.000000] L2C-310 erratum 769419 enabled
[    0.000000] L2C-310 enabling early BRESP for Cortex-A9
[    0.000000] L2C-310: enabling full line of zeros but not enabled in Cortex-A9
[    0.000000] L2C-310 ID prefetch enabled, offset 1 lines
[    0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[    0.000000] L2C-310 cache controller enabled, 16 ways, 256 kB
[    0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x7e530001
[    0.000013] sched_clock: 64 bits at 500MHz, resolution 2ns, wraps every 2199023255552ns
[    0.008351] Calibrating delay loop... 1987.37 BogoMIPS (lpj=9936896)
[    0.071076] pid_max: default: 32768 minimum: 301
[    0.075909] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.082635] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.090190] CPU: Testing write buffer coherency: ok
[    0.095368] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.101252] Setting up static identity map for 0x11a10 - 0x11a44
[    0.108954] CPU1: Booted secondary processor
[    0.168222] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.168291] Brought up 2 CPUs
[    0.181479] SMP: Total of 2 processors activated (3981.31 BogoMIPS).
[    0.187935] CPU: WARNING: CPU(s) started in wrong/inconsistent modes (primary CPU mode 0x13)
[    0.196477] CPU: This may indicate a broken bootloader or firmware.
[    0.208829] NET: Registered protocol family 16
[    0.213983] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.260029] Switched to clocksource arm_global_timer
[    0.266089] NET: Registered protocol family 2
[    0.271104] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.278181] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
[    0.284667] TCP: Hash tables configured (established 1024 bind 1024)
[    0.291175] TCP: reno registered
[    0.294504] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.300464] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.307025] NET: Registered protocol family 1
[    0.312323] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.319426] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.325367] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.335417] msgmni has been set to 239
[    0.339705] bounce: pool size: 64 pages
[    0.343647] io scheduler noop registered
[    0.347666] io scheduler deadline registered (default)
[    0.353186] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    0.360200] console [ttyS0] disabled
[    0.363907] 18000300.serial: ttyS0 at MMIO 0x18000300 (irq = 117, base_baud = 7812500) is a 16550
[    0.372924] console [ttyS0] enabled
[    0.372924] console [ttyS0] enabled
[    0.380004] bootconsole [earlycon0] disabled
[    0.380004] bootconsole [earlycon0] disabled
[    0.389813] libphy: Fixed MDIO Bus: probed
[    0.393973] bgmac: Broadcom 47xx GBit MAC driver loaded
[    0.399414] bcma: bus0: Found chip with id 53010, rev 0x00 and package 0x00
[    0.406450] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x2A, class 0x0)
[    0.415087] bcma: bus0: Core 1 found: Chipcommon B (manuf 0x4BF, id 0x50B, rev 0x01, class 0x0)
[    0.423887] bcma: bus0: Core 2 found: DMA (manuf 0x4BF, id 0x502, rev 0x01, class 0x0)
[    0.431892] bcma: bus0: Core 3 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x05, class 0x0)
[    0.440326] bcma: bus0: Core 4 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x05, class 0x0)
[    0.448757] bcma: bus0: Core 5 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x05, class 0x0)
[    0.457177] bcma: bus0: Core 6 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x05, class 0x0)
[    0.465587] bcma: bus0: Core 7 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x01, class 0x0)
[    0.474179] bcma: bus0: Core 8 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x01, class 0x0)
[    0.482772] bcma: bus0: Core 9 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x01, class 0x0)
[    0.491389] bcma: bus0: Core 10 found: ARM Cortex A9 core (ihost) (manuf 0x4BF, id 0x510, rev 0x01, class 0x0)
[    0.501466] bcma: bus0: Core 11 found: USB 2.0 (manuf 0x4BF, id 0x504, rev 0x01, class 0x0)
[    0.509890] bcma: bus0: Core 12 found: USB 3.0 (manuf 0x4BF, id 0x505, rev 0x01, class 0x0)
[    0.518335] bcma: bus0: Core 13 found: SDIO3 (manuf 0x4BF, id 0x503, rev 0x01, class 0x0)
[    0.526595] bcma: bus0: Core 14 found: I2S (manuf 0x4BF, id 0x834, rev 0x03, class 0x0)
[    0.534695] bcma: bus0: Core 15 found: ARM Cortex A9 JTAG (manuf 0x4BF, id 0x506, rev 0x01, class 0x0)
[    0.544107] bcma: bus0: Core 16 found: Denali DDR2/DDR3 memory controller (manuf 0x4BF, id 0x507, rev 0x01, class 0x0)
[    0.554899] bcma: bus0: Core 17 found: ROM (manuf 0x4BF, id 0x508, rev 0x01, class 0x0)
[    0.562984] bcma: bus0: Core 18 found: NAND flash controller (manuf 0x4BF, id 0x509, rev 0x01, class 0x0)
[    0.572649] bcma: bus0: Core 19 found: SPI flash controller (manuf 0x4BF, id 0x50A, rev 0x01, class 0x0)
[    0.598223] bcm_nand bcma0:18: NAND Controller rev 6.01
[    0.628253] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
[    0.634625] nand: Macronix NAND 128MiB 3,3V 8-bit
[    0.639354] nand: 128MiB, SLC, page size: 2048, OOB size: 64
[    1.629267] random: nonblocking pool is initialized
[    1.791390] 3 bcm47xxpart partitions found on MTD device bcm_nand
[    1.797498] Creating 3 MTD partitions on "bcm_nand":
[    1.802488] 0x000003000000-0x000008000000 : "firmware"
[    1.954503] 0x00000300001c-0x000003400000 : "linux"
[    1.967318] 0x000003400000-0x000008000000 : "ubi"
[    2.112054] bcm53xxspiflash spi32766.0: mx25l4005a (512 Kbytes)
[    2.134805] 3 bcm47xxpart partitions found on MTD device spi32766.0
[    2.141096] Creating 3 MTD partitions on "spi32766.0":
[    2.146245] 0x000000000000-0x000000060000 : "boot"
[    2.151633] 0x000000060000-0x000000070000 : "nvram"
[    2.157060] 0x000000070000-0x000000080000 : "nvram"
[    2.286682] bgmac bcma0:3: Found PHY addr: 30 (NOREGS)
[    2.292497] bgmac bcma0:3: Support for Roboswitch not implemented
[    2.300105] b53_common: found switch: BCM53012, rev 5
[    2.305762] bgmac bcma0:4: Invalid MAC addr: 00:00:00:00:00:00
[    2.311662] bgmac bcma0:4: Using random MAC: ca:f9:c2:27:ce:f4
[    2.317557] bgmac bcma0:4: Found PHY addr: 0
[    2.323500] bgmac: Timeout waiting for reg 0x180
[    2.328133] bgmac bcma0:4: Writing to PHY 0 register 0x0 failed
[    2.335197] bgmac: Timeout waiting for reg 0x180
[    2.339836] bgmac bcma0:4: Reading PHY 0 register 0x0 failed
[    2.345510] bgmac bcma0:4: PHY reset failed
[    2.349711] bgmac bcma0:4: Support for Roboswitch not implemented
[    2.356694] bgmac bcma0:5: Invalid MAC addr: 00:00:00:00:00:00
[    2.362589] bgmac bcma0:5: Using random MAC: f6:86:31:b8:12:7e
[    2.368486] bgmac bcma0:5: Found PHY addr: 0
[    2.374418] bgmac: Timeout waiting for reg 0x180
[    2.379068] bgmac bcma0:5: Writing to PHY 0 register 0x0 failed
[    2.386122] bgmac: Timeout waiting for reg 0x180
[    2.390760] bgmac bcma0:5: Reading PHY 0 register 0x0 failed
[    2.396429] bgmac bcma0:5: PHY reset failed
[    2.400628] bgmac bcma0:5: Support for Roboswitch not implemented
[    2.407588] bgmac: Unsupported core_unit 3
[    2.411734] bgmac: probe of bcma0:6 failed with error -524
[    2.417321] pci_host_bcm5301x bcma0:7: initializing PCIe controller
[    2.699012] pci_host_bcm5301x bcma0:7: link: UP
[    2.703662] pci_host_bcm5301x bcma0:7: PCI host bridge to bus 0000:00
[    2.710138] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fffffff]
[    2.717034] pci_bus 0000:00: root bus resource [io  0x0000]
[    2.722628] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    2.730808] PCI: bus0: Fast back to back transfers disabled
[    2.736791] PCI: bus1: Fast back to back transfers disabled
[    2.742503] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x080fffff]
[    2.749322] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x08007fff 64bit]
[    2.756663] pci 0000:00:00.0: PCI bridge to [bus 01]
[    2.761652] pci 0000:00:00.0:   bridge window [mem 0x08000000-0x080fffff]
[    2.768600] pci_host_bcm5301x bcma0:8: initializing PCIe controller
[    3.049015] pci_host_bcm5301x bcma0:8: link: UP
[    3.053670] pci_host_bcm5301x bcma0:8: PCI host bridge to bus 0001:00
[    3.060145] pci_bus 0001:00: root bus resource [mem 0x40000000-0x47ffffff]
[    3.067039] pci_bus 0001:00: root bus resource [io  0x0000]
[    3.072633] pci_bus 0001:00: No busn resource found for root bus, will use [bus 00-ff]
[    3.080808] PCI: bus0: Fast back to back transfers disabled
[    3.086781] PCI: bus1: Fast back to back transfers disabled
[    3.092527] pci 0001:00:00.0: BAR 8: assigned [mem 0x40000000-0x400fffff]
[    3.099343] pci 0001:01:00.0: BAR 0: assigned [mem 0x40000000-0x40007fff 64bit]
[    3.106679] pci 0001:00:00.0: PCI bridge to [bus 01]
[    3.111665] pci 0001:00:00.0:   bridge window [mem 0x40000000-0x400fffff]
[    3.118612] pci_host_bcm5301x bcma0:9: initializing PCIe controller
[    3.509008] pci_host_bcm5301x bcma0:9: link: DOWN
[    3.514716] bcm47xx-wdt bcm47xx-wdt.0: BCM47xx Watchdog Timer enabled (30 seconds, Software Timer)
[    3.523733] bcma: bus0: Bus registered
[    3.527600] bcma-pci-bridge 0000:01:00.0: enabling device (0140 -> 0142)
[    3.534380] bcma: bus1: Found chip with id 0x4360, rev 0x03 and package 0x01
[    3.541483] bcma: bus1: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x2B, class 0x0)
[    3.550050] bcma: bus1: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x2A, class 0x0)
[    3.558705] bcma: bus1: Core 2 found: ARM CR4 (manuf 0x4BF, id 0x83E, rev 0x02, class 0x0)
[    3.567014] bcma: bus1: Core 3 found: PCIe Gen2 (manuf 0x4BF, id 0x83C, rev 0x01, class 0x0)
[    3.575489] bcma: bus1: Core 4 found: USB 2.0 Device (manuf 0x4BF, id 0x81A, rev 0x11, class 0x0)
[    3.615850] bcma: bus1: Invalid SPROM read from the PCIe card, trying to use fallback SPROM
[    3.640781] bcma: bus1: Bus registered
[    3.644597] bcma-pci-bridge 0001:01:00.0: enabling device (0140 -> 0142)
[    3.651362] bcma: bus2: Found chip with id 0x4360, rev 0x03 and package 0x01
[    3.658454] bcma: bus2: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x2B, class 0x0)
[    3.667015] bcma: bus2: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x2A, class 0x0)
[    3.675681] bcma: bus2: Core 2 found: ARM CR4 (manuf 0x4BF, id 0x83E, rev 0x02, class 0x0)
[    3.683994] bcma: bus2: Core 3 found: PCIe Gen2 (manuf 0x4BF, id 0x83C, rev 0x01, class 0x0)
[    3.692471] bcma: bus2: Core 4 found: USB 2.0 Device (manuf 0x4BF, id 0x81A, rev 0x11, class 0x0)
[    3.732838] bcma: bus2: Invalid SPROM read from the PCIe card, trying to use fallback SPROM
[    3.757911] bcma: bus2: Bus registered
[    3.761993] TCP: cubic registered
[    3.765323] NET: Registered protocol family 17
[    3.769866] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    3.782520] 8021q: 802.1Q VLAN Support v1.8
[    3.786782] Registering SWP/SWPB emulation handler
[    3.793531] UBI: auto-attach mtd2
[    3.796862] UBI: attaching mtd2 to ubi0
[    4.323196] UBI: scanning is finished
[    4.358153] UBI: volume 1 ("rootfs_data") re-sized from 9 to 551 LEBs
[    4.365063] UBI: attached mtd2 (name "ubi", size 76 MiB) to ubi0
[    4.371110] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    4.377911] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    4.384641] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    4.391538] UBI: good PEBs: 608, bad PEBs: 0, corrupted PEBs: 0
[    4.397468] UBI: user volume: 2, internal volumes: 1, max. volumes count: 128
[    4.404621] UBI: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 618700809
[    4.413602] UBI: available PEBs: 0, total reserved PEBs: 608, PEBs reserved for bad PEB handling: 20
[    4.422792] UBI: background thread "ubi_bgt0d" started, PID 242
[    4.429671] UBI: ubiblock0_0 created from ubi0:0(rootfs)
[    4.435011] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[    4.449759] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[    4.457105] Freeing unused kernel memory: 172K (c0379000 - c03a4000)
[    5.420484] External imprecise Data abort at addr=0xb6fe32c4, fsr=0x1c06 ignored.
[    5.655495] init: Console is alive
[    5.659111] init: - watchdog -
[    6.304628] usbcore: registered new interface driver usbfs
[    6.310233] usbcore: registered new interface driver hub
[    6.315633] usbcore: registered new device driver usb
[    6.678359] init: - preinit -
[    8.299035] eth0: Link is Up - 1Gbps/Full - flow control off
[   10.287358] mount_root: loading kmods from internal overlay
[   10.674910] UBIFS: default file-system created
[   10.680762] UBIFS: background thread "ubifs_bgt0_1" started, PID 327
[   10.802497] UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[   10.808987] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[   10.818143] UBIFS: FS size: 68694016 bytes (65 MiB, 541 LEBs), journal size 3428352 bytes (3 MiB, 27 LEBs)
[   10.827826] UBIFS: reserved for root: 3244587 bytes (3168 KiB)
[   10.833679] UBIFS: media format: w4/r0 (latest is w4/r0), UUID F6536208-3BD0-4F04-8E48-1439D2B82080, small LPT model
[   10.845642] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[   10.852742] block: unable to load configuration (fstab: Entry not found)
[   10.859536] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab
[   10.866053] block: unable to load configuration (fstab: Entry not found)
[   10.872814] block: attempting to load /etc/config/fstab
[   10.878140] block: unable to load configuration (fstab: Entry not found)
[   10.884900] block: no usable configuration
[   10.921518] UBIFS: un-mount UBI device 0, volume 1
[   10.926338] UBIFS: background thread "ubifs_bgt0_1" stops
[   10.937054] UBIFS: background thread "ubifs_bgt0_1" started, PID 330
[   11.058314] UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[   11.064798] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[   11.073959] UBIFS: FS size: 68694016 bytes (65 MiB, 541 LEBs), journal size 3428352 bytes (3 MiB, 27 LEBs)
[   11.083634] UBIFS: reserved for root: 3244587 bytes (3168 KiB)
[   11.089487] UBIFS: media format: w4/r0 (latest is w4/r0), UUID F6536208-3BD0-4F04-8E48-1439D2B82080, small LPT model
[   11.452516] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[   11.459656] block: unable to load configuration (fstab: Entry not found)
[   11.466415] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab
[   11.472976] block: unable to load configuration (fstab: Entry not found)
[   11.479795] block: attempting to load /etc/config/fstab
[   11.485079] block: unable to load configuration (fstab: Entry not found)
[   11.491851] block: no usable configuration
[   11.519424] mount_root: overlay filesystem has not been fully initialized yet
[   11.526940] mount_root: switching to jffs2 overlay
[   11.544724] procd: - early -
[   11.547672] procd: - watchdog -
[   12.238400] procd: - ubus -
[   13.269581] procd: - init -
[   15.067804] NET: Registered protocol family 10
[   15.075342] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   15.086960] Loading modules backported from Linux version master-2015-07-21-0-g47cd203
[   15.094921] Backport generated by backports.git backports-20150626-0-gc1a4168
[   15.103398] ip_tables: (C) 2000-2006 Netfilter Core Team
[   15.111023] lib80211: common routines for IEEE802.11 drivers
[   15.120885] nf_conntrack version 0.5.0 (8062 buckets, 32248 max)
[   15.198792] xt_time: kernel timezone is -0000
[   15.209186] cfg80211: World regulatory domain updated:
[   15.214372] cfg80211:  DFS Master region: unset
[   15.218752] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   15.228559] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   15.236592] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   15.244629] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   15.252668] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   15.262175] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   15.271678] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   15.279789] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   15.287811] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   15.310353] PPP generic driver version 2.4.2
[   15.315609] NET: Registered protocol family 24
[   15.331679] b43-phy0: Broadcom 4360 WLAN found (core revision 42)
[   15.348256] b43-phy0 ERROR: FOUND UNSUPPORTED PHY (Analog 12, Type 11 (AC), Revision 1)
[   15.356309] b43: probe of bcma1:1 failed with error -95
[   15.361619] b43-phy1: Broadcom 4360 WLAN found (core revision 42)
[   15.378218] b43-phy1 ERROR: FOUND UNSUPPORTED PHY (Analog 12, Type 11 (AC), Revision 1)
[   15.386257] b43: probe of bcma2:1 failed with error -95
[   15.391583] Broadcom 43xx driver loaded [ Features: NL ]
[   15.401977] usbcore: registered new interface driver brcmfmac
[   19.264213] device eth0.1 entered promiscuous mode
[   19.269064] device eth0 entered promiscuous mode
[   19.281871] br-lan: port 1(eth0.1) entered forwarding state
[   19.287492] br-lan: port 1(eth0.1) entered forwarding state
[   19.299140] eth0: Link is Up - 1Gbps/Full - flow control off
[   21.279016] br-lan: port 1(eth0.1) entered forwarding state

Attachments (0)

Change History (2)

comment:1 Changed 2 years ago by anonymous

b43-phy0 ERROR: FOUND UNSUPPORTED PHY (Analog 12, Type 11 (AC), Revision 1)
[   15.356309] b43: probe of bcma1:1 failed with error -95

This means that b43 does not support this hardware and will not support it in the future

Broadcom 4360 is not supported on Linux because open drivers are missing.
Please complain to the router manufacturer or Broadcom. Many Broadcom hardware is missing open drivers and wireless is not usable on OpenWrt because of this.

comment:2 Changed 2 years ago by hauke

  • Resolution set to wontfix
  • Status changed from new to closed

BCM4360 is not supported by b43

Add Comment

Modify Ticket

Action
as closed .
The resolution will be deleted. Next status will be 'reopened'.
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.