Modify

Opened 3 years ago

#20248 new defect

u-boot image does not run correctly on Zyxel P2812HNU-F1

Reported by: geos@… Owned by: developers
Priority: normal Milestone:
Component: other Version: Trunk
Keywords: Cc:

Description

the file openwrt-lantiq-p2812hnufx_nandspl-u-boot.img does not run correctly on Zyxel P2812HNU-F1. it makes the router running infinite loop like this:

ROM VER: 1.1.4
CFG 06
NAND
NAND Read OK

U-Boot SPL 2013.10-openwrt4 (Jul 21 2015 - 18:11:11)
SPL: initializing NAND flash

ROM VER: 1.1.4
CFG 06
NAND
NAND Read OK

U-Boot SPL 2013.10-openwrt4 (Jul 21 2015 - 18:11:11)
SPL: initializing NAND flash

(probably older) files provided on dropbox work OK:

https://www.dropbox.com/sh/9aup68dv6oq5rzo/AAA1FtHXpo_loRpb_0PTBxxja/F1%20OpenWRT?dl=0

I followed instructions from wiki for this device:

P-2812HNU-Fx # nand erase.chip

NAND erase.chip: device 0 whole chip
Erasing at 0x1700000 --  17% complete.
Erasing at 0x2e00000 --  36% complete.
Erasing at 0x4500000 --  54% complete.
Erasing at 0x5d60000 --  72% complete.
Erasing at 0x7460000 --  91% complete.
Erasing at 0x7fe0000 -- 100% complete.
OK
P-2812HNU-Fx # 
P-2812HNU-Fx # tftp 0x80700000 /tftpboot/dl.eko.one.pl/chaos_calmer/lantiq/uboot-lantiq-p2812hnufx_nandspl/openwrt-lantiq-p2812hnufx_nandspl-u-boot.img
ltq_phy: addr 0, link 0, speed 10, duplex 0
ltq_phy: addr 1, link 1, speed 1000, duplex 1
ltq_phy: addr 17, link 0, speed 100, duplex 0
ltq_phy: addr 19, link 0, speed 100, duplex 0
ltq_phy: addr 5, link 0, speed 10, duplex 0
Using ltq-eth device
TFTP from server 192.168.1.2; our IP address is 192.168.1.1
Filename '/tftpboot/dl.eko.one.pl/chaos_calmer/lantiq/uboot-lantiq-p2812hnufx_nandspl/openwrt-lantiq-p2812hnufx_nandspl-u-boot.img'.
Load address: 0x80700000
Loading: ###########
     2.5 MiB/s
done
Bytes transferred = 158227 (26a13 hex)
P-2812HNU-Fx # nand write 0x80700000 0x0 0x26a13

NAND write: device 0 offset 0x0, size 0x26a13
 158227 bytes written: OK
P-2812HNU-Fx # 
P-2812HNU-Fx # 
ROM VER: 1.1.4
CFG 06
NAND
NAND Read OK

U-Boot SPL 2013.10-openwrt4 (Jul 21 2015 - 18:11:11)
SPL: initializing NAND flash

ROM VER: 1.1.4
CFG 06
NAND
NAND Read OK

U-Boot SPL 2013.10-openwrt4 (Jul 21 2015 - 18:11:11)
SPL: initializing NAND flash

ROM VER: 1.1.4
CFG 06
NAND
NAND Read OK

U-Boot SPL 2013.10-openwrt4 (Jul 21 2015 - 18:11:11)
SPL: initializing NAND flash

ROM VER: 1.1.4
CFG 06
NAND
NAND Read OK

U-Boot SPL 2013.10-openwrt4 (Jul 21 2015 - 18:11:11)
SPL: initializing NAND flash

ROM VER: 1.1.4
CFG 06
NAND
NAND Read OK

thank you,
geos

Attachments (0)

Change History (0)

Add Comment

Modify Ticket

Action
as new .
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.