Modify

Opened 3 years ago

Closed 2 years ago

Last modified 22 months ago

#19570 closed defect (worksforme)

Nexx WT3020 not work from 4th april 2015

Reported by: ftrsoft@… Owned by: developers
Priority: normal Milestone: Chaos Calmer 15.05
Component: base system Version: Trunk
Keywords: wt3020, boot Cc:

Description

When install firmware from trunk, router does not boot. Only blue indicator will blink once.

Attachments (0)

Change History (13)

comment:1 Changed 3 years ago by anonymous

confirming, the same here...

comment:2 Changed 3 years ago by puleglot

What bootloader do you use? "Chinese u-boot" doesn't work with latest openwrt images including 15.05-rc3. u-boot from the following forum thread works fine for me:
https://forum.openwrt.org/viewtopic.php?id=55180

comment:3 Changed 2 years ago by kolya-ay

Confirm the same. I have bricked my first device with original bootloader following the wiki instructions (http://wiki.openwrt.org/toh/nexx/wt3020#alternative_way_for_initial_installation). However with the hackpascal's one (http://breed.hackpascal.net/) it works as expected. Refer the forum thread

comment:4 Changed 2 years ago by openwrt@…

I can confirm that Chaos Calmer (stable) works fine on WT-3020H using the chinese u-boot alternative ("breed").
If you don't mind the possible GPL issues, use the file named "breed-mt7620-reset1.bin", which can be downloaded from http://breed.hackpascal.net/ (file mirror: https://mega.nz/#!1pkiTbRT!uyXyCVOw51MnCs7zS4sred1SNusyGV5kdTc-XqQClYY, complete site mirror: https://mega.nz/#!l00AXASS!gGPBeIgJQ9HqubIb3QXSPp8Piq63GpZoRkwg1EbHZkY).

comment:5 Changed 2 years ago by dev.openwrt.org@…

I was able to flash the WT3020H and WT1520 with mtd over telnet without any problems. I used the sysupgrade images provided by the project.

comment:6 Changed 2 years ago by dev.openwrt.org@…

I believe this ticket can be closed. Please speak up if you can still reproduce this problem.

comment:7 follow-up: Changed 2 years ago by dev-openwrt-org@…

I just installed Chaos Calmer (15.05, r46767) factory [1] on a Nexx
WT3020 (H) using the original web interface without changing the
U-Boot first. Installation was smooth and I can log in just fine.

The unit was just delivered from China and has a serial number
starting with YS15081.

[1] https://downloads.openwrt.org/chaos_calmer/15.05/ramips/mt7620/openwrt-15.05-ramips-mt7620-wt3020-8M-squashfs-factory.bin

comment:8 in reply to: ↑ 7 Changed 2 years ago by anonymous

Replying to dev-openwrt-org@…:

I just installed Chaos Calmer (15.05, r46767) factory [1] on a Nexx
WT3020 (H) using the original web interface without changing the
U-Boot first. Installation was smooth and I can log in just fine.

The unit was just delivered from China and has a serial number
starting with YS15081.

[1] https://downloads.openwrt.org/chaos_calmer/15.05/ramips/mt7620/openwrt-15.05-ramips-mt7620-wt3020-8M-squashfs-factory.bin

I can confirm this too, I received the router yesterday and flashed it through the web interface. After LED blinking for less than a minute, the router rebooted and OpenWRT was ready to go! My serial number starts with YS15081 too.

comment:9 Changed 2 years ago by netomx

Flashed the factory one without problems with SN starting YS15071.

comment:10 Changed 2 years ago by nbd

  • Resolution set to worksforme
  • Status changed from new to closed

comment:11 Changed 2 years ago by anonymous

flashing from webinterface worked for me too on YS14110

comment:13 in reply to: ↑ 12 Changed 22 months ago by anonymous

Replying to anonymous:

Flashed https://downloads.openwrt.org/chaos_calmer/15.05/ramips/mt7620/openwrt-15.05-ramips-mt7620-wt3020-8M-squashfs-factory.bin from original web interface of Nexx without any issue

same, all ok. After reflash wifi is disabled

Add Comment

Modify Ticket

Action
as closed .
The resolution will be deleted. Next status will be 'reopened'.
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.