Opened 3 years ago

Last modified 2 years ago

#19218 reopened defect

AR71XX: wan port does not autonegotiate correctly at 1GBIT

Reported by: anonymous Owned by: developers
Priority: high Milestone:
Component: kernel Version: Trunk
Keywords: Cc:


My Buffalo WZR-HP-G300NH with the rtl8366rb switch r44874 does not see a link when connected to a 1gbit port.

After a power cycle or "/etc/init.d/network restart" my wanport wont come online again. (in 95% of the time it wont, very lucky if it comes online, then its connected at 1gbit)

ethtool -s eth1 speed 100 duplex full autoneg off (autoneg on/off does not matter)

brings the port online in no time

Attachments (0)

Change History (3)

comment:1 Changed 3 years ago by florian

Is this is still a problem with current trunk builds?

comment:2 Changed 3 years ago by nbd

  • Resolution set to no_response
  • Status changed from new to closed

comment:3 Changed 2 years ago by anonymous

  • Resolution no_response deleted
  • Status changed from closed to reopened

sorry for the late repsonse.
had no physical accesses to the device.
I am now again with the device and it has the same malfunction.

I have updated to one of the latest trunk avaible at "ftp openwrt". the latest one has build erros.


can I help with debug logs? How can I retrieve them?

Add Comment

Modify Ticket

as reopened .

E-mail address and user name can be saved in the Preferences.

Note: See TracTickets for help on using tickets.