Modify

Opened 3 years ago

Last modified 3 years ago

#19211 reopened defect

lantiq/Buffalo WBMR-HP-G300H DSL status lost

Reported by: finas Owned by: developers
Priority: normal Milestone:
Component: packages Version: Trunk
Keywords: Cc:

Description

Today when checking the dsl line status with dsl_control command I noticed that it's not displayed. It was displayed when I first rebooted the router after a firmware update. Restarting dsl_control_status, and the info appears again.

CHAOS CALMER (Bleeding Edge, r44843)

root@router:~# uname -a
Linux router 3.18.8 #5 SMP Mon Mar 16 12:43:01 WET 2015 mips GNU/Linu

root@router:~# /etc/init.d/dsl_control status
Chipset: Ifx-AR9 1.2
Line State: UP [0x801: showtime_tc_sync]
Data Rate: 0 b/s / 0 b/s
Line Attenuation: 0.0dB / 0.0dB
Noise Margin: 0.0dB / 0.0dB
Line Uptime: 2d 3h 38m 21s
root@router:~# /etc/init.d/dsl_control status
Chipset: Ifx-AR9 1.2
Line State: UP [0x801: showtime_tc_sync]
Data Rate: 0 b/s / 0 b/s
Line Attenuation: 0.0dB / 0.0dB
Noise Margin: 0.0dB / 0.0dB
Line Uptime: 2d 3h 38m 22s
root@router:~# /etc/init.d/dsl_control status
Chipset: Ifx-AR9 1.2
Line State: UP [0x801: showtime_tc_sync]
Data Rate: 0 b/s / 0 b/s
Line Attenuation: 0.0dB / 0.0dB
Noise Margin: 0.0dB / 0.0dB
Line Uptime: 2d 3h 38m 26s
root@router:~#

after dsl_control restart

root@router:~# /etc/init.d/dsl_control status
Chipset: Ifx-AR9 1.2
Line State: UP [0x801: showtime_tc_sync]
Data Rate: 12.288 Mb/s / 1.021 Mb/s
Line Attenuation: 14.8dB / 13.5dB
Noise Margin: 20.5dB / 13.5dB
Line Uptime: 4m 11s

Attachments (0)

Change History (7)

comment:1 Changed 3 years ago by nbd

  • Resolution set to fixed
  • Status changed from new to closed

fixed in r44845

comment:2 Changed 3 years ago by finas

  • Resolution fixed deleted
  • Status changed from closed to reopened

nbd, but this was after 44845!!!

you see 44843 because I was using the patch you made for me to test! :)

comment:3 Changed 3 years ago by nbd

Right, sorry.

comment:4 Changed 3 years ago by blogic

which board are you using ?

is the link still up independent of the status not being shown ?

comment:5 Changed 3 years ago by finas

MIPS: machine is WBMR - Buffalo WBMR-HP-G300H

root@router:~# uptime
13:41:09 up 2 days, 23:31, load average: 0.52, 0.51, 0.45

root@router:~# /etc/init.d/dsl_control status
Chipset: Ifx-AR9 1.2
Line State: UP [0x801: showtime_tc_sync]
Data Rate: 0 b/s / 0 b/s
Line Attenuation: 0.0dB / 0.0dB
Noise Margin: 0.0dB / 0.0dB
Line Uptime: 2d 17h 13m 11s

yes, the link is still up and working normaly. The only problem is that the information about the line parameters are lost after some time.

comment:6 Changed 3 years ago by finas

on another note, I just softbricked the router trying to flash the latest source. Even the one made by buildbot doesn't work. all leds off and it's dead. will try to see If I can narrow this a bit but it will be hard as the router is 150km from me and I need a person next to it to make it boot from tftp. :(

comment:7 Changed 3 years ago by finas

ok, it's up and running again with latest source. don't know what happened for it to die while flashing.

Add Comment

Modify Ticket

Action
as reopened .
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.