Opened 3 years ago

Closed 3 years ago

#19106 closed defect (fixed)

WNDR4300 not workink from kernel-3.18

Reported by: anonymous Owned by: developers
Priority: highest Milestone: Chaos Calmer 15.05
Component: kernel Version: Trunk
Keywords: Cc:


Started - switched only LAN LED (comp), no DHCP working, not LAN connection.
Can use kernel 3.14 installing and working fain.
Compilation from source (3.18) - succes.
Instalation from tftp or OFW - succes.
Start and automaticaly configured - bad.
Im not possible can uses traditonal "cable" (RS/UART-3.3V) - pleas help and confirm my problem (or not).

Attachments (0)

Change History (5)

comment:1 Changed 3 years ago by miltador@…

Have much the same problem with my Tp-Link wr842nd v1 and latest trunk. Worked fine with 3.18.7 kernel (dont remember revision).

Latest build doesnt boot, only LAN led blinking.
Recovery from tftp with latest build also doesnt have any effect.

comment:2 Changed 3 years ago by anonymous

Confirm - 3.18.8 - its the same situation...

comment:3 Changed 3 years ago by anonymous

/changeset/44658.html - fixed my problem to WNDR4300 (from this ticket) -thx. ;) - actualy start and normal boot ... and working :D

comment:4 Changed 3 years ago by anonymous

pleas close this ticket.

comment:5 Changed 3 years ago by nbd

  • Resolution set to fixed
  • Status changed from new to closed

Add Comment

Modify Ticket

as closed .
The resolution will be deleted. Next status will be 'reopened'.

E-mail address and user name can be saved in the Preferences.

Note: See TracTickets for help on using tickets.