Modify

Opened 3 years ago

Last modified 3 years ago

#18898 new defect

openwrt x86 barrier breaker generic doesn't recognize ethernet on board interface

Reported by: anonymous Owned by: developers
Priority: response-needed Milestone:
Component: kernel Version: Trunk
Keywords: Intel RC82540EM p5nd2-sli nforce4 Cc:

Description

Hi to all i'm trying to running barrier breaker on my pc with motherboard ASUS p5nd2-sli deluxe, it has got 2 NICs on board the marvell is working good but the intel is not recognized by the drivers on the kernel, i think the intel model of the ethernet is Intel RC82540EM please solve this :) cheers from italy ROMA!
FORZA ROMA!

Attachments (0)

Change History (6)

comment:1 Changed 3 years ago by jow

  • Priority changed from highest to response-needed

Did you install kmod-e1000e ?

comment:2 Changed 3 years ago by anonymous

no i didn't, i just download the image on the openwrt site(barrier breaker) i put it on a usb pendrive then i used it to boot openwrt but only the marvell nforce ethernet is recognized, how must i do?

comment:3 Changed 3 years ago by anonymous

i'm trying to understand how to build my own image, i was seeing on the kernel modules the kmod-e1000e but the description is "PCI" it is an on board on the p5nd2-sli ASUS, please help me!

comment:4 Changed 3 years ago by anonymous

the electrical connection of the ethernet chips is still PCI even if the chips are soldered to the board and not mounted on a separate add-in card.

see
http://ark.intel.com/products/1285/Intel-82540EM-Gigabit-Ethernet-Controller

comment:5 Changed 3 years ago by anonymous

thank you for the help, i will try to compile my own image using that driver, i will say to you if it works! thank you again! cheers from ROMA!

comment:6 Changed 3 years ago by anonymous

it solved my problem but in the attitude adjustment relase! but i compiled a new version using buildroot process entire, how can i install that module by using the ext4 image prebuild downlodable from barrier breaker folder? which is the command and where can i get that module? please help me!

Add Comment

Modify Ticket

Action
as new .
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.