Modify

Opened 3 years ago

#18761 new defect

end_request: I/O error, dev mtdblock4, sector 88

Reported by: daidaiwood@… Owned by: developers
Priority: highest Milestone: Barrier Breaker 14.07
Component: kernel Version: Barrier Breaker 14.07
Keywords: Cc:

Description

[ 0.000000] Linux version 3.14.28 (cc@CC-Server) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r43949) ) #1 Tue Jan 13 22:33:22 CST 2015
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 0001974c (MIPS 74Kc)
[ 0.000000] SoC: Atheros AR9344 rev 2
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 08000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x07ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x07ffffff]
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] free_area_init_node: node 0, pgdat 803964e0, node_mem_map 81000000
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32768 pages, LIFO batch:7
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: board=WNDR3700_V4 console=ttyS0,115200 mtdparts=ar934x-nfc:256k(u-boot)ro,256k(u-boot-env)ro,256k(caldata),512k(pot),2048k(language),512k(config),3072k(traffic_meter),2048k(kernel),121856k(ubi),123904k@0x6c0000(firmware),256k(caldata_backup),-(reserved) rootfstype=squashfs noinitrd
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 125732K/131072K available (2701K kernel code, 122K rwdata, 556K rodata, 196K init, 185K bss, 5340K reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:51
[ 0.000000] Clocks: CPU:560.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:40.000MHz
[ 0.000000] Calibrating delay loop... 278.93 BogoMIPS (lpj=1394688)
[ 0.070000] pid_max: default: 32768 minimum: 301
[ 0.070000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.080000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.080000] NET: Registered protocol family 16
[ 0.090000] MIPS: machine is NETGEAR WNDR3700v4
[ 0.090000] ar71xx: using random MAC address for eth0
[ 0.310000] registering PCI controller with io_map_base unset
[ 0.320000] bio: create slab <bio-0> at 0
[ 0.330000] PCI host bridge to bus 0000:00
[ 0.330000] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
[ 0.340000] pci_bus 0000:00: root bus resource [io 0x0000]
[ 0.340000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.350000] pci 0000:00:00.0: [168c:0033] type 00 class 0x028000
[ 0.350000] pci 0000:00:00.0: invalid calibration data
[ 0.350000] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff 64bit]
[ 0.350000] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.350000] pci 0000:00:00.0: supports D1
[ 0.350000] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 0.350000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.350000] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1001ffff 64bit]
[ 0.360000] pci 0000:00:00.0: BAR 6: assigned [mem 0x10020000-0x1002ffff pref]
[ 0.360000] pci 0000:00:00.0: using irq 40 for pin 1
[ 0.370000] Switched to clocksource MIPS
[ 0.370000] NET: Registered protocol family 2
[ 0.380000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.380000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.390000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.400000] TCP: reno registered
[ 0.400000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.410000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.410000] NET: Registered protocol family 1
[ 0.420000] PCI: CLS 0 bytes, default 32
[ 0.420000] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.440000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.450000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.460000] msgmni has been set to 245
[ 0.460000] io scheduler noop registered
[ 0.460000] io scheduler deadline registered (default)
[ 0.470000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 0.500000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 2500000) is a 16550A
[ 0.510000] console [ttyS0] enabled
[ 0.510000] bootconsole [early0] disabled
[ 0.520000] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xf1
[ 0.530000] nand: Micron NAND 128MiB 3,3V 8-bit
[ 0.540000] nand: 128MiB, SLC, page size: 2048, OOB size: 64
[ 0.540000] Scanning device for bad blocks
[ 0.630000] mtd: ar934x-nfc: skipping zero sized partition
[ 0.630000] 11 cmdlinepart partitions found on MTD device ar934x-nfc
[ 0.640000] Creating 11 MTD partitions on "ar934x-nfc":
[ 0.650000] 0x000000000000-0x000000040000 : "u-boot"
[ 0.650000] 0x000000040000-0x000000080000 : "u-boot-env"
[ 0.660000] 0x000000080000-0x0000000c0000 : "caldata"
[ 0.670000] 0x0000000c0000-0x000000140000 : "pot"
[ 0.670000] 0x000000140000-0x000000340000 : "language"
[ 0.680000] 0x000000340000-0x0000003c0000 : "config"
[ 0.690000] 0x0000003c0000-0x0000006c0000 : "traffic_meter"
[ 0.690000] 0x0000006c0000-0x0000008c0000 : "kernel"
[ 0.700000] 0x0000008c0000-0x000007fc0000 : "ubi"
[ 0.710000] 0x0000006c0000-0x000007fc0000 : "firmware"
[ 1.310000] random: nonblocking pool is initialized
[ 1.860000] 0x000007fc0000-0x000008000000 : "caldata_backup"
[ 1.890000] switch0: Atheros AR8327 rev. 4 switch registered on ag71xx-mdio.0
[ 2.120000] libphy: ag71xx_mdio: probed
[ 2.710000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd034, driver=Atheros AR8216/AR8236/AR8316]
[ 2.720000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
[ 2.730000] TCP: cubic registered
[ 2.730000] NET: Registered protocol family 17
[ 2.740000] 8021q: 802.1Q VLAN Support v1.8
[ 2.750000] UBI: auto-attach mtd8
[ 2.750000] UBI: attaching mtd8 to ubi0
[ 4.240000] UBI: scanning is finished
[ 4.260000] UBI: attached mtd8 (name "ubi", size 119 MiB) to ubi0
[ 4.270000] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 4.280000] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 4.280000] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 4.290000] UBI: good PEBs: 952, bad PEBs: 0, corrupted PEBs: 0
[ 4.300000] UBI: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 4.300000] UBI: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 490999204
[ 4.310000] UBI: available PEBs: 0, total reserved PEBs: 952, PEBs reserved for bad PEB handling: 20
[ 4.320000] UBI: background thread "ubi_bgt0d" started, PID 284
[ 4.330000] UBI: ubiblock0_0 created from ubi0:0(rootfs)
[ 4.330000] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[ 4.350000] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 4.360000] Freeing unused kernel memory: 196K (803af000 - 803e0000)
[ 7.490000] usbcore: registered new interface driver usbfs
[ 7.490000] usbcore: registered new interface driver hub
[ 7.500000] usbcore: registered new device driver usb
[ 7.550000] SCSI subsystem initialized
[ 7.560000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 7.560000] ehci-platform: EHCI generic platform driver
[ 7.570000] ehci-platform ehci-platform: EHCI Host Controller
[ 7.580000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[ 7.590000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[ 7.610000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[ 7.610000] hub 1-0:1.0: USB hub found
[ 7.620000] hub 1-0:1.0: 1 port detected
[ 7.620000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 7.630000] ohci-platform: OHCI generic platform driver
[ 7.640000] uhci_hcd: USB Universal Host Controller Interface driver
[ 7.650000] usbcore: registered new interface driver usb-storage
[ 10.800000] eth0: link up (1000Mbps/Full duplex)
[ 12.680000] end_request: I/O error, dev mtdblock4, sector 88
[ 12.680000] Buffer I/O error on device mtdblock4, logical block 11
[ 12.850000] UBIFS: background thread "ubifs_bgt0_1" started, PID 376
[ 13.170000] UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 13.180000] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 13.190000] UBIFS: FS size: 107167744 bytes (102 MiB, 844 LEBs), journal size 5332992 bytes (5 MiB, 42 LEBs)
[ 13.200000] UBIFS: reserved for root: 4952683 bytes (4836 KiB)
[ 13.200000] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 6118EBF6-48F5-471D-B32E-1D4B069D8523, small LPT model
[ 13.400000] eth0: link down
[ 17.930000] NET: Registered protocol family 10
[ 17.980000] Initializing XFRM netlink socket
[ 17.990000] NET: Registered protocol family 15
[ 18.000000] tun: Universal TUN/TAP device driver, 1.6
[ 18.000000] tun: (C) 1999-2004 Max Krasnyansky <maxk@…>
[ 18.040000] ufsd: module license 'Commercial product' taints kernel.
[ 18.050000] Disabling lock debugging due to kernel taint
[ 18.070000] ufsd:: trace mask set to 0000000f
[ 18.070000] ufsd: driver (lke_8.9.0 lke_8.9.0_22, LBD=ON, delalloc, ioctl, bdi, sd2, fua, tr) loaded at 87380000
[ 18.070000] NTFS support included
[ 18.070000] Big endian platform
[ 18.070000] optimized: speed
[ 18.070000] Build_forASUS_PRODUCTS_005_k2.6.22.15_2013-11-20_lke_8.9.0_r217400_b3
[ 18.070000]
[ 18.120000] l2tp_core: L2TP core driver, V2.0
[ 18.130000] l2tp_netlink: L2TP netlink interface
[ 18.150000] gre: GRE over IPv4 demultiplexor driver
[ 18.160000] ip_gre: GRE over IPv4 tunneling driver
[ 18.180000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 18.240000] u32 classifier
[ 18.240000] input device check on
[ 18.250000] Actions configured
[ 18.260000] Mirror/redirect action on
[ 18.270000] nf_conntrack version 0.5.0 (1967 buckets, 7868 max)
[ 18.350000] Loading modules backported from Linux version master-2014-11-04-0-gf3660a2
[ 18.360000] Backport generated by backports.git backports-20141023-2-g4ff890b
[ 18.380000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 18.450000] usbcore: registered new interface driver ums-alauda
[ 18.450000] usbcore: registered new interface driver ums-cypress
[ 18.470000] usbcore: registered new interface driver ums-datafab
[ 18.490000] usbcore: registered new interface driver ums-freecom
[ 18.490000] usbcore: registered new interface driver ums-isd200
[ 18.510000] usbcore: registered new interface driver ums-jumpshot
[ 18.520000] usbcore: registered new interface driver ums-karma
[ 18.560000] usbcore: registered new interface driver ums-sddr09
[ 18.560000] usbcore: registered new interface driver ums-sddr55
[ 18.580000] usbcore: registered new interface driver ums-usbat
[ 18.660000] xt_time: kernel timezone is -0000
[ 18.750000] cfg80211: Calling CRDA to update world regulatory domain
[ 18.750000] cfg80211: World regulatory domain updated:
[ 18.760000] cfg80211: DFS Master region: unset
[ 18.760000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 18.770000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 18.780000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 18.790000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 18.800000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 18.800000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 18.810000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 18.820000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 18.830000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 18.930000] PPP generic driver version 2.4.2
[ 18.950000] PPP MPPE Compression module registered
[ 18.950000] NET: Registered protocol family 24
[ 18.970000] PPTP driver version 0.8.5
[ 19.030000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 19.070000] ath9k ar934x_wmac: Direct firmware load failed with error -2
[ 19.070000] ath9k ar934x_wmac: Falling back to user helper
[ 19.250000] ath: EEPROM regdomain: 0x0
[ 19.250000] ath: EEPROM indicates default country code should be used
[ 19.250000] ath: doing EEPROM country->regdmn map search
[ 19.250000] ath: country maps to regdmn code: 0x3a
[ 19.250000] ath: Country alpha2 being used: US
[ 19.250000] ath: Regpair used: 0x3a
[ 19.260000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 19.270000] cfg80211: Calling CRDA for country: US
[ 19.270000] cfg80211: Regulatory domain changed to country: US
[ 19.280000] cfg80211: DFS Master region: FCC
[ 19.280000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 19.290000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[ 19.300000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
[ 19.310000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
[ 19.320000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[ 19.330000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 19.340000] ieee80211 phy0: Atheros AR9340 Rev:2 mem=0xb8100000, irq=47
[ 19.360000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 19.420000] ath9k 0000:00:00.0: Direct firmware load failed with error -2
[ 19.420000] ath9k 0000:00:00.0: Falling back to user helper
[ 19.630000] ath: EEPROM regdomain: 0x0
[ 19.630000] ath: EEPROM indicates default country code should be used
[ 19.630000] ath: doing EEPROM country->regdmn map search
[ 19.630000] ath: country maps to regdmn code: 0x3a
[ 19.630000] ath: Country alpha2 being used: US
[ 19.630000] ath: Regpair used: 0x3a
[ 19.640000] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 19.660000] ieee80211 phy1: Atheros AR9300 Rev:4 mem=0xb0000000, irq=40
[ 27.220000] end_request: I/O error, dev mtdblock4, sector 88
[ 27.220000] Buffer I/O error on device mtdblock4, logical block 11
[ 28.750000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 28.760000] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
[ 28.760000] device eth0.1 entered promiscuous mode
[ 28.770000] device eth0 entered promiscuous mode
[ 28.780000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 28.820000] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
[ 30.260000] cfg80211: Calling CRDA for country: CN
[ 30.260000] cfg80211: Regulatory domain changed to country: CN
[ 30.270000] cfg80211: DFS Master region: FCC
[ 30.270000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 30.280000] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 30.290000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (N/A)
[ 30.300000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
[ 30.310000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[ 30.320000] cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
[ 30.330000] cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm), (N/A)
[ 30.330000] cfg80211: (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
[ 30.650000] eth0: link up (1000Mbps/Full duplex)
[ 30.650000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 30.690000] br-lan: port 1(eth0.1) entered forwarding state
[ 30.690000] br-lan: port 1(eth0.1) entered forwarding state
[ 30.700000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[ 30.700000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
[ 30.710000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 32.690000] br-lan: port 1(eth0.1) entered forwarding state
[ 33.940000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 33.950000] device wlan0 entered promiscuous mode
[ 33.990000] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 33.990000] device wlan1 entered promiscuous mode
[ 34.000000] br-lan: port 3(wlan1) entered forwarding state
[ 34.000000] br-lan: port 3(wlan1) entered forwarding state
[ 34.950000] br-lan: port 3(wlan1) entered disabled state
[ 41.600000] br-lan: port 2(wlan0) entered forwarding state
[ 41.610000] br-lan: port 2(wlan0) entered forwarding state
[ 41.610000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 42.720000] br-lan: port 3(wlan1) entered forwarding state
[ 42.720000] br-lan: port 3(wlan1) entered forwarding state
[ 42.730000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 43.610000] br-lan: port 2(wlan0) entered forwarding state
[ 44.720000] br-lan: port 3(wlan1) entered forwarding state
[ 1729.750000] end_request: I/O error, dev mtdblock4, sector 88
[ 1729.750000] Buffer I/O error on device mtdblock4, logical block 11
[ 1729.790000] end_request: I/O error, dev mtdblock4, sector 88
[ 1729.790000] Buffer I/O error on device mtdblock4, logical block 11
[ 1729.800000] end_request: I/O error, dev mtdblock4, sector 88
[ 1729.800000] Buffer I/O error on device mtdblock4, logical block 11
[ 1917.630000] end_request: I/O error, dev mtdblock4, sector 88
[ 1917.630000] Buffer I/O error on device mtdblock4, logical block 11
[ 1917.670000] end_request: I/O error, dev mtdblock4, sector 88
[ 1917.670000] Buffer I/O error on device mtdblock4, logical block 11
[ 1917.680000] end_request: I/O error, dev mtdblock4, sector 88
[ 1917.680000] Buffer I/O error on device mtdblock4, logical block 11
[ 2067.510000] end_request: I/O error, dev mtdblock4, sector 92
[ 2067.520000] isofs_fill_super: bread failed, dev=mtdblock4, iso_blknum=23, block=46
[ 2411.460000] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.

Attachments (0)

Change History (0)

Add Comment

Modify Ticket

Action
as new .
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.