Opened 3 years ago

#18513 new defect

Failsafe does not work on MT7620 device.

Reported by: yousong Owned by: developers
Priority: normal Milestone:
Component: base system Version: Trunk
Keywords: Cc:


Hi, looks like target/linux/ramips/base-files/lib/preinit/07_set_preinit_iface_ramips [1] also needs to cover MT7620 devices.

For SoC MT7620, mt7530 is the switch device name. I guess the same also holds for MT7628, but not sure about that. Also set untag 1 does not work for mt7530, I had to use set ports "0 6t" for setting up VLAN 1.

Even without fixing 07_set_preinit_iface_ramips, I also noticed that UDP broadcast works fine.

netmsg hello

And there were times ARP entries in /proc/net/arp were as follows.

root@(none):/# cat /proc/net/arp
IP address       HW type     Flags       HW address            Mask     Device      0x1         0x2         70:11:24:XX:XX:XX     *        eth0      0x1         0x0         00:00:00:00:00:00     *        eth0.1

For your information, the problem also exists in BB release.


Attachments (0)

Change History (0)

Add Comment

Modify Ticket

as new .

E-mail address and user name can be saved in the Preferences.

Note: See TracTickets for help on using tickets.