Modify

Opened 11 years ago

Closed 10 years ago

Last modified 4 years ago

#1819 closed defect (worksforme)

Kamikaze pre1 brcm-2.4 usb-storage not working

Reported by: demoosvaldo@… Owned by: developers
Priority: normal Milestone: Barrier Breaker 14.07
Component: kernel Version:
Keywords: Cc:

Description

When i connect a usb sd/mmc card reader (with a 2Gb SD card inserted) on my Linksys WRTSL54GS v1.0 it doesn't get detected correctly. I'm running Kamikaze Pre1 release.

Here is my dmesg output:

Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi0 : SCSI emulation for USB Mass Storage devices
  Vendor: Generic-  Model: SD/MMC            Rev: 1.00
  Type:   Direct-Access                      ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
sda: Unit Not Ready, sense:
Current 00:00: sns = 70  2
ASC=3a ASCQ= 0
Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0xc0 0x00 0x00
sda : READ CAPACITY failed.
sda : status = 1, message = 00, host = 0, driver = 08
Current sd00:00: sns = 70  2
ASC=3a ASCQ= 0
Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0xc0 0x00 0x00
sda : block size assumed to be 512 bytes, disk size 1GB.
sda: test WP failed, assume Write Enabled
 /dev/scsi/host0/bus0/target0/lun0: I/O error: dev 08:00, sector 0
 I/O error: dev 08:00, sector 0
 unable to read partition table
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
USB Mass Storage support registered.

Also something similar happens when i connect a JMicron IDE/SATA to USB adapter with a Maxtor 20Gb IDE hard drive. I really don't know why this happens. Any help should be appreciated. Thanks.

My dmesg output:

Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi0 : SCSI emulation for USB Mass Storage devices
  Vendor: Maxtor 3  Model: APNC              Rev: 14Y0
  Type:   Direct-Access                      ANSI SCSI revision: 02
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 40021632 512-byte hdwr sectors (20491 MB)
 /dev/scsi/host0/bus0/target0/lun0:<6>
usb_control/bulk_msg: timeout
usb_control/bulk_msg: timeout
usb_control/bulk_msg: timeout
hub.c: USB device not accepting new address (error=-71)
scsi: device set offline - not ready or command retry failed after bus reset: host 0 channel 0 id 0 lun 0
SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 70000
 I/O error: dev 08:00, sector 0
 I/O error: dev 08:00, sector 2
 I/O error: dev 08:00, sector 0
 unable to read partition table
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 3
USB Mass Storage support registered.

#/proc/bus/usb/devices

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 5
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.04
S:  Manufacturer=Linux 2.4.34 ehci_hcd
S:  Product=PCI device 1033:00e0
S:  SerialNumber=01:02.2
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=256ms
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=152d ProdID=2338 Rev= 1.00
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  2mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

#/proc/scsi/usb-storage-0/0

   Host scsi0: usb-storage
       Vendor: JMicron
      Product: JM20338 SATA, USB Combo
Serial Number: 222222222222
     Protocol: Transparent SCSI
    Transport: Bulk
         GUID: 152d23380000222222222222
     Attached: Yes

Attachments (0)

Change History (3)

comment:1 Changed 11 years ago by nbd

  • Milestone changed from Kamikaze 7.07 to Kamikaze

comment:2 Changed 10 years ago by nbd

  • Resolution set to worksforme
  • Status changed from new to closed

should be working in trunk

comment:3 Changed 4 years ago by jow

  • Milestone changed from Attitude Adjustment 12.09 to Barrier Breaker 14.07

Milestone Attitude Adjustment 12.09 deleted

Add Comment

Modify Ticket

Action
as closed .
The resolution will be deleted. Next status will be 'reopened'.
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.