Modify

Opened 3 years ago

Closed 3 years ago

Last modified 3 years ago

#17826 closed defect (too_vague)

Realtek RTL8306SD and VLANs

Reported by: anonymous Owned by: developers
Priority: normal Milestone:
Component: packages Version: Trunk
Keywords: Cc:

Description

I have tried to forums and to no avail. Now I am actually placing in a bug.
The swconfig is not working with vlan tagging.
I am not sure if this is an over all thing but on the Realtek RTL8306SD switch, the tagging only happen when the last item is tagged and then all ports get tagged. Any help would be great!

Attachments (0)

Change History (2)

comment:1 Changed 3 years ago by nbd

  • Resolution set to too_vague
  • Status changed from new to closed

you need to provide a lot more detail than that. what device are you using? what's your network configuration? what openwrt version are you using? how are you testing and verifying the results? etc.

comment:2 Changed 3 years ago by anonymous

swconfig vlan results

VLAN 0:
        vid: 0
        ports: 0 1 2 3 4 5t 
VLAN 1:
        vid: 1
        ports: 0 1 2 3 4 5t 
VLAN 2:
        vid: 10
        ports: 0 1 2 3 4 
VLAN 3:
        vid: 20
        ports: 0 1 2 3 4 
VLAN 4:
        vid: 30
        ports: 0 1 2 3 4 
VLAN 5:
        vid: 40
        ports: 0 1 2 3 4 
config switch_vlan                                                 
        option device 'switch0'                                    
        option vlan '0'                                            
        option vid '0'                                             
        option ports '0 1 2 3 4 5t'                                
                                                                   
config switch_vlan                                                 
        option device 'switch0'                                    
        option vlan '1'                                            
        option vid '1'                                             
        option ports '0 1 2 3 4 5t'                                
                                                                   
config switch_vlan                                                 
        option device 'switch0'                                    
        option vlan '2'                                            
        option ports '0t 1t 2t 3t 4t'                              
        option vid '10'                                            
                                                                   
config switch_vlan                   
        option device 'switch0'      
        option vlan '3'              
        option ports '0t 1t 2t 3t 4t'
        option vid '20'       

config switch_vlan                   
        option device 'switch0'      
        option vlan '4'              
        option ports '0t 1t 2t 3t 4t'
        option vid '30'       

The system it is installed on right now is Linksys (cisco) E2100L yet it does the same on WRT160NL

My current build is CHAOS CALMER (Bleeding Edge, r41986) yet I've seen this also on RC3 Barrier Breaker

My system has a DHCP service serving on all the VLANS.
My computer picks up all severed ips when when it is directly connected to my switch (CISCO sg200-26).
When I have the switch configured to tagged (10,20,30 vlans) i receive all ipaddress and nothing from 1 because it gets tagged due to this tag identification issue.

RTL8306S

Add Comment

Modify Ticket

Action
as closed .
The resolution will be deleted. Next status will be 'reopened'.
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.