Modify

Opened 3 years ago

Last modified 3 years ago

#17650 new task

[bcm63xx] add support for Comtrend AR5382u

Reported by: demonnwx2010@… Owned by: developers
Priority: highest Milestone: Barrier Breaker 14.07
Component: kernel Version: Trunk
Keywords: bcm63xx Cc:

Description

Router: Comtrend AR5382u a clone Router: Comtrend AR5381u already supported by openwrt Changeset 33895, only with a different name Board ID.

Comtrend AR5381u Board ID: 96328A-1241N

Comtrend AR5382u Board ID: 96328A-1341N
The difference in the location of the memory chip on the motherboard.
Need to add support for this router.

Attachments (0)

Change History (4)

comment:1 Changed 3 years ago by ppvazquezfer@…

Witch are the differences between AR5381u and AR5382u? How much flash it has? There are leds different than the AR5381u?
If you can provide a source code with the 96328A-1341N board definition it will be easier to port.

comment:2 Changed 3 years ago by demonnwx2010@…

I changed the board id for 96328A-1241N at boot CFE.
flashed openwrt http://downloads.openwrt.org/snapshots/trunk/brcm63xx/openwrt-963281TAN-8M-flash-generic-squashfs-cfe.bin size image 4194560
Image http://downloads.openwrt.org/snapshots/trunk/brcm63xx/openwrt-AR-5381u-squashfs-cfe.bin not come in size 8388864.
The image size should be 8,290,048.


what information you need to provide?
But boot log:

HELO
CPUI
L1CI
DRAM
----
PHYS
ZQDN
PHYE
DINT
LSYN
USYN
MSYN
LMBE
PASS
----                                                                            
ZBSS                                                                            
CODE                                                                            
DATA                                                                            
L12F                                                                            
MAIN                                                                            
                                                                                
                                                                                
CFE version 1.0.37-106.17-1 for BCM96328 (32bit,SP,BE)                          
Build Date: 2010-06-28 15:35:56 (wander@broadcom-eu)                            
Copyright (C) 2000-2009 Broadcom Corporation.                                   
                                                                                
HS Serial flash device: name MX25L64, id 0xc217 size 8192KB                     
Total Flash size: 8192K with 2048 sectors                                       
Chip ID: BCM6328B0, MIPS: 320MHz, DDR: 320MHz, Bus: 160MHz                      
Main Thread: TP0                                                                
Memory Test Passed                                                              
Total Memory: 67108864 bytes (64MB)                                             
Boot Address: 0xb8000000                                                        
                                                                                
Board IP address                  : 192.168.1.1:ffffff00                        
Host IP address                   : 192.168.1.100                               
Gateway IP address                :                                             
Run from flash/host (f/h)         : f                                           
Default host run file name        : vmlinux                                     
Default host flash file name      : bcm963xx_fs_kernel                          
Boot delay (0-9 seconds)          : 1                                           
Board Id (0-7)                    : 96328A-1241N                                
Number of MAC Addresses (1-32)    : 11                                          
Base MAC Address                  : 00:1f:ce:46:95:b7                           
PSI Size (1-64) KBytes            : 24                                          
Enable Backup PSI [0|1]           : 0                                           
System Log Size (0-256) KBytes    : 0                                           
Main Thread Number [0|1]          : 0                                           
Serial Number                     :                                             
                                                                                
*** Press any key to stop auto run (1 seconds) ***                              
Auto run second count down: 0                                                   
Booting from only image (0xb8010000) ...                                        
Code Address: 0x80010000, Entry Address: 0x80010000                             
LZMA: Prossible old LZMA format, trying to decompress..                         
Decompression OK!                                                               
Entry at 0x80010000                                                             
Closing network.                                                                
Disabling Switch ports.                                                         
Flushing Receive Buffers...                                                     
46 buffers found.                                                               
Closing DMA Channels.                                                           
Starting program at 0x80010000                                                  
[    0.000000] Linux version 3.14.16 (user@user-3QLAP-RS1001T-WBN3-MB) (gcc ver4
[    0.000000] Detected Broadcom 0x6328 CPU revision b0                         
[    0.000000] CPU frequency is 320 MHz                                         
[    0.000000] 64MB of RAM installed                                            
[    0.000000] registering 32 GPIOs                                             
[    0.000000] board_bcm963xx: Boot address 0xb8000000                          
[    0.000000] board_bcm963xx: CFE version: 1.0.37-106.17-1                     
[    0.000000] bootconsole [early0] enabled                                     
[    0.000000] CPU0 revision is: 0002a075 (Broadcom BMIPS4350)                  
[    0.000000] board: board name: 96328A-1241N                                  
[    0.000000] Determined physical RAM map:                                     
[    0.000000]  memory: 04000000 @ 00000000 (usable)                            
[    0.000000] Initrd not found or empty - disabling initrd                     
[    0.000000] Zone ranges:                                                     
[    0.000000]   Normal   [mem 0x00000000-0x03ffffff]                           
[    0.000000] Movable zone start for each node                                 
[    0.000000] Early memory node ranges                                         
[    0.000000]   node   0: [mem 0x00000000-0x03ffffff]                          
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.  
[    0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16s
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pa6
[    0.000000] Kernel command line:  root=/dev/mtdblock2 rootfstype=squashfs,jf0
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)              
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)    
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)     
[    0.000000] Memory: 60180K/65536K available (2535K kernel code, 137K rwdata,)
[    0.000000] NR_IRQS:256                                                      
[    0.000000] Calibrating delay loop... 318.46 BogoMIPS (lpj=636928)           
[    0.036000] pid_max: default: 32768 minimum: 301                             
[    0.040000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)      
[    0.044000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) 
[    0.052000] NET: Registered protocol family 16                               
[    0.292000] registering PCI controller with io_map_base unset                
[    0.304000] bio: create slab <bio-0> at 0                                    
[    0.312000] PCI host bridge to bus 0000:00                                   
[    0.316000] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x10ffffff]   
[    0.320000] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]    
[    0.324000] pci_bus 0000:00: No busn resource found for root bus, will use []
[    0.328000] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reg
[    0.332000] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]    
[    0.336000] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f03fff 64b]
[    0.340000] pci 0000:00:00.0: PCI bridge to [bus 01]                         
[    0.344000] pci 0000:00:00.0:   bridge window [mem 0x10f00000-0x10ffffff]    
[    0.348000] Switched to clocksource MIPS                                     
[    0.356000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)                 
[    0.364000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)                 
[    0.368000] bcma: bus0: Found chip with id 0xA8D9, rev 0x01 and package 0x0A 
[    0.376000] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev)
[    0.384000] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, re)
[    0.396000] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F,)
[    0.484000] bcma: bus0: Invalid SPROM read from the PCIe card, trying to useM
[    0.504000] bcma: bus0: Bus registered                                       
[    0.508000] NET: Registered protocol family 2                                
[    0.516000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)  
[    0.520000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)         
[    0.528000] TCP: Hash tables configured (established 1024 bind 1024)         
[    0.536000] TCP: reno registered                                             
[    0.540000] UDP hash table entries: 256 (order: 0, 4096 bytes)               
[    0.544000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)          
[    0.552000] NET: Registered protocol family 1                                
[    0.560000] futex hash table entries: 256 (order: -1, 3072 bytes)            
[    0.568000] squashfs: version 4.0 (2009/01/31) Phillip Lougher               
[    0.576000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORI.
[    0.584000] msgmni has been set to 117                                       
[    0.588000] io scheduler noop registered                                     
[    0.592000] io scheduler deadline registered (default)                       
[    0.600000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36, base_baud = t
[    0.612000] console [ttyS0] enabled                                          
[    0.612000] console [ttyS0] enabled                                          
[    0.620000] bootconsole [early0] disabled                                    
[    0.620000] bootconsole [early0] disabled                                    
[    0.636000] m25p80 spi1.0: found mx25l6405d, expected m25p80                 
[    0.640000] m25p80 spi1.0: mx25l6405d (8192 Kbytes)                          
[    0.644000] bcm63xxpart: CFE boot tag found with version 6 and board type 96N
[    0.652000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000        
[    0.660000] bcm63xxpart: Partition 1 is kernel offset 10100 and length 11ff00
[    0.668000] bcm63xxpart: Partition 2 is rootfs offset 130000 and length 6c000
[    0.676000] bcm63xxpart: Partition 3 is nvram offset 7f0000 and length 10000 
[    0.684000] bcm63xxpart: Partition 4 is linux offset 10000 and length 7e0000 
[    0.688000] 5 bcm63xxpart partitions found on MTD device spi1.0              
[    0.696000] Creating 5 MTD partitions on "spi1.0":                           
[    0.700000] 0x000000000000-0x000000010000 : "CFE"                            
[    0.708000] 0x000000010100-0x000000130000 : "kernel"                         
[    0.716000] mtd: partition "kernel" must either start or end on erase block y
[    0.732000] 0x000000130000-0x0000007f0000 : "rootfs"                         
[    0.740000] mtd: device 2 (rootfs) set to be root filesystem                 
[    0.744000] mtd: partition "rootfs_data" created automatically, ofs=0x3700000
[    0.752000] 0x000000370000-0x0000007f0000 : "rootfs_data"                    
[    0.760000] 0x0000007f0000-0x000000800000 : "nvram"                          
[    0.768000] 0x000000010000-0x0000007f0000 : "linux"                          
[    0.820000] b53_common: found switch: BCM63xx, rev 0                         
[    0.828000] bcm63xx-wdt bcm63xx-wdt:  started, timer margin: 30 sec          
[    0.836000] TCP: cubic registered                                            
[    0.840000] NET: Registered protocol family 17                               
[    0.844000] 8021q: 802.1Q VLAN Support v1.8                                  
[    0.860000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2. 
[    0.884000] Freeing unused kernel memory: 1276K (80331000 - 80470000)        
[    2.356000] random: nonblocking pool is initialized                          
procd: Console is alive                                                         
procd: - watchdog -                                                             
[    4.696000] usbcore: registered new interface driver usbfs                   
[    4.704000] usbcore: registered new interface driver hub                     
[    4.708000] usbcore: registered new device driver usb                        
[    4.724000] Button Hotplug driver version 0.4.1                              
[    4.736000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver       
[    4.744000] ehci-platform: EHCI generic platform driver                      
[    4.856000] ehci-platform ehci-platform: EHCI Host Controller                
[    4.860000] ehci-platform ehci-platform: new USB bus registered, assigned bu1
[    4.868000] ehci-platform ehci-platform: irq 50, io mem 0xb0002500           
[    4.888000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00, overcurd
[    4.896000] hub 1-0:1.0: USB hub found                                       
[    4.900000] hub 1-0:1.0: 1 port detected                                     
[    4.912000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver           
[    4.924000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/0
procd: - preinit -                                                              
[    5.596000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, fulx
Press the [f] key and hit [enter] to enter failsafe mode                        
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level    
jffs2 is ready                                                                  
jffs2 is ready                                                                  
[    9.312000] jffs2: notice: (228) jffs2_build_xattr_subsystem: complete build.
switching to overlay                                                            
procd: - early -                                                                
procd: - watchdog -                                                             
procd: - ubus -                                                                 
procd: - init -                                                                 
Please press Enter to activate this console.                                    
[   11.908000] NET: Registered protocol family 10                               
[   11.936000] nf_conntrack version 0.5.0 (960 buckets, 3840 max)               
[   11.952000] ip6_tables: (C) 2000-2006 Netfilter Core Team                    
[   11.976000] Loading modules backported from Linux version master-2014-05-22-a
[   11.984000] Backport generated by backports.git backports-20140320-37-g5c33d0
[   11.996000] ip_tables: (C) 2000-2006 Netfilter Core Team                     
[   12.076000] xt_time: kernel timezone is -0000                                
[   12.128000] cfg80211: Calling CRDA to update world regulatory domain         
[   12.140000] cfg80211: World regulatory domain updated:                       
[   12.148000] cfg80211:  DFS Master region: unset                              
[   12.152000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_ga)
[   12.160000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 )
[   12.168000] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 )
[   12.176000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 )
[   12.188000] cfg80211:   (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000)
[   12.196000] cfg80211:   (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000)
[   12.204000] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000)
[   12.212000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 )
[   12.220000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0)
[   12.352000] PPP generic driver version 2.4.2                                 
[   12.360000] NET: Registered protocol family 24                               
[   12.420000] b43-phy0: Broadcom 43225 WLAN found (core revision 23)           
[   12.428000] b43-phy0: Found PHY: Analog 8, Type 4 (N), Revision 6            
[   12.432000] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2056, Revision 11, Vers0
[   12.456000] Broadcom 43xx driver loaded [ Features: PNL ]                    
[   17.576000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, fulx
[   22.256000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, fulx
[   22.276000] device eth0.1 entered promiscuous mode                           
[   22.280000] device eth0 entered promiscuous mode                             
[   22.288000] br-lan: port 1(eth0.1) entered forwarding state                  
[   22.296000] br-lan: port 1(eth0.1) entered forwarding state                  
[   22.328000] br-wwan: port 1(eth0) entered forwarding state                   
[   22.336000] br-wwan: port 1(eth0) entered forwarding state                   
[   24.300000] br-lan: port 1(eth0.1) entered forwarding state                  
[   24.340000] br-wwan: port 1(eth0) entered forwarding state                   
[   24.504000] cfg80211: Calling CRDA for country: RU                           
[   24.532000] cfg80211: Regulatory domain changed to country: RU               
[   24.536000] cfg80211:  DFS Master region: ETSI                               
[   24.540000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_ga)
[   24.552000] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 )
[   24.560000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 )
[   24.568000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 )
[   24.576000] cfg80211:   (5650000 KHz - 5730000 KHz @ 80000 KHz), (N/A, 3000 )
[   24.584000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 )
procd: - init complete -

log update

HELO                                                                            
CPUI                                                                            
L1CI                                                                            
DRAM                                                                            
----                                                                            
PHYS                                                                            
ZQDN                                                                            
PHYE                                                                            
DINT                                                                            
LSYN                                                                            
USYN                                                                            
MSYN                                                                            
LMBE                                                                            
PASS                                                                            
----                                                                            
ZBSS                                                                            
CODE                                                                            
DATA                                                                            
L12F                                                                            
MAIN                                                                            
                                                                                
                                                                                
CFE version 1.0.37-106.17-1 for BCM96328 (32bit,SP,BE)                          
Build Date: 2010-06-28 15:35:56 (wander@broadcom-eu)                            
Copyright (C) 2000-2009 Broadcom Corporation.                                   
                                                                                
HS Serial flash device: name MX25L64, id 0xc217 size 8192KB                     
Total Flash size: 8192K with 2048 sectors                                       
Chip ID: BCM6328B0, MIPS: 320MHz, DDR: 320MHz, Bus: 160MHz                      
Main Thread: TP0                                                                
Memory Test Passed                                                              
Total Memory: 67108864 bytes (64MB)                                             
Boot Address: 0xb8000000                                                        
                                                                                
                                                                                
*** Break into CFE console ( IRQ Mode )***                                      
                                                                                
Board IP address                  : 192.168.1.1:ffffff00                        
Host IP address                   : 192.168.1.100                               
Gateway IP address                :                                             
Run from flash/host (f/h)         : f                                           
Default host run file name        : vmlinux                                     
Default host flash file name      : bcm963xx_fs_kernel                          
Boot delay (0-9 seconds)          : 1                                           
Board Id (0-7)                    : 96328A-1241N                                
Number of MAC Addresses (1-32)    : 11                                          
Base MAC Address                  : 00:1f:ce:46:95:b7                           
PSI Size (1-64) KBytes            : 24                                          
Enable Backup PSI [0|1]           : 0                                           
System Log Size (0-256) KBytes    : 0                                           
Main Thread Number [0|1]          : 0                                           
Serial Number                     :                                             
                                                                                
web info: Waiting for connection on socket 0.                                   
CFE> f 192.168.1.1:ar5381u                                                      
Loading 192.168.1.1:ar5381u ...                                                 
Loading failed.: CFE error -21                                                  
*** command status = -21                                                        
web info: Waiting for connection on socket 1.                                   
web info: Waiting for connection on socket 0.                                   
web info: Upload 8388864 bytes, Broadcom image format.                          
CFE> Illegal image size 8388608.  Image size must not be greater than 8290048.  
                                                                                
Resetting board...

comment:3 Changed 3 years ago by noltari@…

You should test if the LEDs and reset buttons work.

BTW, you should add a new board definition with the original board id.

comment:4 Changed 3 years ago by demonnwx2010@…

LEDs seem to be working. button, check later.
Need to adjust the size of the firmware file to the required and add original board was going, but I do not know how to do it.

Add Comment

Modify Ticket

Action
as new .
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.