Modify

Opened 3 years ago

Closed 3 years ago

#17503 closed defect (duplicate)

WNDR3700 V1 WAN PORT SPEED

Reported by: vhpcampos@… Owned by: developers
Priority: high Milestone: Barrier Breaker 14.07
Component: base system Version: Barrier Breaker 14.07
Keywords: WNDR3700 Cc:

Description

Runing OpenWrt Barrier Breaker 14.07-rc2

I only got my wan port works when i use "ethtool -s eth1 speed 100 duplex full autoneg on", if i let it default or try to set the speed to 1000, the link goes down. Im using a CAT6 and works normally using the stock firmware.

Settings for eth1:

Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full

100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full

Supported pause frame use: No
Supports auto-negotiation: Yes
Advertised link modes: 100baseT/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: MII
PHYAD: 4
Transceiver: external
Auto-negotiation: on
Current message level: 0x000000ff (255)

drv probe link timer ifdown ifup rx_err tx_err

Link detected: yes

Attachments (0)

Change History (1)

comment:1 Changed 3 years ago by florian

  • Resolution set to duplicate
  • Status changed from new to closed

Add Comment

Modify Ticket

Action
as closed .
The resolution will be deleted. Next status will be 'reopened'.
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.